Abstract
This paper presented a new technique to fabricate 3D microcomponents. The simulation and molding of microgears of 70–100μm diameters and 1∶1 aspect ratio were completed. Micro-EDM was combined with focused ion beam sputtering to produce a microcavity for subsequent molding process. The simulation pinpointed locations of trapped gas, predicted filling time, stress distribution, and uniformity of a microgear. Subtle differences in simulation results were observed depending on the finite elements used. Limited success was found for predicting weld lines and surface finish. The molded microcomponents producing by this technique possessed features that were compatible with those fabricated by the LIGA technique, i.e., surface finish ∼ 10 nm, accuracy < 1μm and aspect ratio > 10.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Ali, M.Y, Hung, N.P., and Yuan. S., Simulation of Micro-Injection Moulding. Proceedings Int. Conf. on Precision Engineering, Mar 2000, Singapore, pp. 535–540.
Haisma, J., Verheijen, M., Van den Heuvel, K., and Van den Berg, J., Mold-Assisted Nanolithography: A Process for Reliable Pattern Replication, J. Vac. Sci. Technol. B, Vol. 14(6), pp. 4124–4128, Nov/Dec 1996.
Hung, N.P. and Ali, M.Y., Simulation of Micro-Injection Moulding. Proceedings Int. Conf. on Precision Engineering, Mar 2000, Singapore, pp. 517–522.
Ruprecht, R., Bacher, W., Haußelt J.H., Plotter, V., Injection Molding of LIGA and LIGA-Similar Microstructures Using Filled and Unfilled Thermoplastics. SPIE Proceedings, Vol. 2639, pp. 146–156, 1995.
Weber, L., Ehrfeld, W., Freimuth, H., Lacher, M., Lehr, H., Pech, B., Micromolding-A Powerful Tool for The Large Scale Production of Precise Microstructures, SPIE Proceedings, Vol. 2879, pp. 156–166, 1996.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Kluwer Academic Publishers
About this chapter
Cite this chapter
Hung, W.N.P., Ngothai, Y., Yuan, S., Lee, C.W., Ali, M.Y. (2002). Micromolding of Three-dimensional Components. In: Inasaki, I. (eds) Initiatives of Precision Engineering at the Beginning of a Millennium. Springer, Boston, MA. https://doi.org/10.1007/0-306-47000-4_27
Download citation
DOI: https://doi.org/10.1007/0-306-47000-4_27
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-7923-7414-5
Online ISBN: 978-0-306-47000-4
eBook Packages: Springer Book Archive