Advertisement

Ductile Mode Cutting of Glass

  • Kiu LiuEmail author
  • Hao Wang
  • Xinquan Zhang
Chapter
Part of the Springer Series in Advanced Manufacturing book series (SSAM)

Abstract

Recently, the industrial application of glass has increased enormously because of its excellent and unique mechanical, physical, chemical and optical properties. However, machining of glass is still a major problem for the manufacturing industry since it is very brittle and high hardness. In this chapter, grooving and cutting tests of soda-lime glass are conducted to evaluate its cutting performance using an ultra-precision lathe with a single crystal diamond tool. The machined workpiece surface topography, chip formation and surface roughness are examined using a SEM, AFM and white light interferometer. Tool wear is measured using OMIS. Experimental results indicate that ductile mode cutting of soda-lime glass is achieved when the undeformed chip thickness being less than a critical value. Ultrasonic vibration assisted cutting is employed to improve ductile mode cutting performance of soda-lime glass. Continuous layer chip and smooth surface are obtained in ultrasonic vibration assisted cutting of soda-lime glass, which largely improve its machinability in ductile mode cutting. But extremely short tool life is the main constrain for realizing the ultrasonic vibration assisted ductile mode cutting of glass in industry.

References

  1. 1.
    Huerta M, Malkin S (1976) Grinding of glass: the mechanics of the process. ASME T J Eng Ind 98:459–467CrossRefGoogle Scholar
  2. 2.
    Huerta M, Malkin S (1976) Grinding of glass: surface strength and fracture strength. ASME T J Eng Ind 98:468–473CrossRefGoogle Scholar
  3. 3.
    Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. ASME T J Eng Ind 113:184–189CrossRefGoogle Scholar
  4. 4.
    Namba Y, Abe M (1993) Ultra precision grinding of optical glasses to produce super-smooth surfaces. CIRP Ann 42:417–420CrossRefGoogle Scholar
  5. 5.
    Takeuchi Y (1996) Ultra precision 3D micro machining of glass. CIRP Ann 45:401–404CrossRefGoogle Scholar
  6. 6.
    Komanduri R (1996) On material removal mechanisms in finishing of advance ceramics and glasses. CIRP Ann 45:509–513CrossRefGoogle Scholar
  7. 7.
    Brehm R, van Dun K, Teunissen JCG et al (1979) Transparent single point turning of optical glass: a phenomenological presentation. Prec Eng 1:207–213CrossRefGoogle Scholar
  8. 8.
    Liu K (2002) Ductile cutting for rapid prototyping of tungsten carbide tools. NUS PhD thesis, SingaporeGoogle Scholar
  9. 9.
    Liu K, Li XP (2001) Modelling of ductile cutting of tungsten carbide. T NAMRI/SME 29:251–258Google Scholar
  10. 10.
    Liu K, Li XP (2001) Ductile cutting of tungsten carbide. J Mater Proc Tech 113:348–354CrossRefGoogle Scholar
  11. 11.
    Liu K, Li XP, Liang SY (2004) Nanometer scale ductile cutting of tungsten carbide. J Manu Proc 6:187–195CrossRefGoogle Scholar
  12. 12.
    Fang FZ, Chen LJ (2000) Ultra-precision cutting for ZKN7 glass. CIRP Ann 49:17–20CrossRefGoogle Scholar
  13. 13.
    Moriwaki T, Shmoto E, Inoue K (1992) Ultraprecision ductile cutting of glass by applying ultrasonic vibration. CIRP Ann 41:141–144CrossRefGoogle Scholar
  14. 14.
    Zhou M, Wang XJ, Ngoi BK et al (2002) Brittle ductile transition in the diamond cutting of glasses with the aid of ultrasonic vibration. J Mat Proc Tech 121:243–251CrossRefGoogle Scholar
  15. 15.
  16. 16.
    Liu K, Li XP, Liang SY et al (2005) Nanometer scale ductile mode cutting of soda-lime glass. J Manu Proc 7:95–101CrossRefGoogle Scholar
  17. 17.
    Liu K, Li XP, Liang SY et al (2003) Nanometer scale ductile cutting of tungsten carbide. T NAMRI SME 31:153–160Google Scholar
  18. 18.
    Liu XD, Ding X (2002) Diamond turning of Stavax/glass assisted by ultrasonic vibration. SIMTech Tech Re 51:1–9Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Singapore Institute of Manufacturing TechnologySingaporeSingapore
  2. 2.Department of Mechanical EngineeringNational University of SingaporeSingaporeSingapore
  3. 3.School of Mechanical EngineeringShanghai Jiao Tong UniversityShanghaiChina

Personalised recommendations