Advertisement

Ductile Mode Cutting of Silicon

  • Kiu LiuEmail author
  • Hao Wang
  • Xinquan Zhang
Chapter
Part of the Springer Series in Advanced Manufacturing book series (SSAM)

Abstract

In wafer fabrication, most machining processes such as slicing, edge grinding, finishing, lapping, polishing, back thinning and dicing, are based on grinding or/and abrasive process, which always generate micro cracks and subsurface damage. In this chapter, theoretical analysis on ductile mode cutting of silicon wafer shows that machined silicon surface with free of fracture and nanometer scale surface roughness can be achieved when dislocation dominates its chip formation rather than crack propagation. Nanometric cutting of silicon wafers using an ultra-precision CNC lathe with single crystal diamond cutters are carried out to investigate the tool edge radius effect on critical undeformed chip thickness and verify ductile mode cutting performance of silicon wafer. Machined workpiece surfaces and used diamond tools are examined using a scanning electron microscope (SEM), transmission electron microscopy (TEM) and atomic force microscope (AFM). Experimental results from the nanometric cutting tests indicate that in cutting of silicon wafers, there is a critical undeformed chip thickness, at or below which chip formation is under ductile mode cutting generating continuous chips. And critical undeformed chip thickness differs when cutting of silicon wafers using diamond cutters with different tool edge radius. Larger diamond tool edge radius, larger critical undeformed chip thickness. But there is an upper bound for diamond tool edge radius, above which chip formation is changed from ductile mode to brittle mode even though undeformed chip thickness remains to be smaller than tool edge radius. Experimental results are found to well substantiate the analytical findings and nanometric ductile mode cutting of silicon wafer is successfully achieved under certain cutting conditions.

References

  1. 1.
    Pei ZJ, Billingsley SR, Miura S (1999) Grinding induced subsurface cracks in silicon wafers. Int J Mach Tools Manufact 39:1103–1116CrossRefGoogle Scholar
  2. 2.
    Zarudi I, Zhang L (1996) Subsurface damage in single-crystal silicon due to grinding and polishing. J Mater Sci Lett 15:586–587CrossRefGoogle Scholar
  3. 3.
    Brinksmeier E, von Schmieden W (1987) ID-cut-off grinding of brittle materials. CIRP Ann 36:219–222CrossRefGoogle Scholar
  4. 4.
    Enomoto T, Shimazaki Y, Tani Y et al (1999) Development of a resinoid diamond wire containing metal powder for slicing a slicing ingot. CIRP Ann 48:273–276CrossRefGoogle Scholar
  5. 5.
    Yan J, Yoshino M, Kuriagawa T et al (2001) On the ductile machining of silicon for micro electro-mechanical system (MEMS), opto-electronic and optical applications. Mater Sci Eng A 297:230–234CrossRefGoogle Scholar
  6. 6.
    Puttick KE, Whitmore LC, Chao CL et al (1994) Transmission electron microscopy of nanomachined silicon crystals. Phil Mag A 69:91–103CrossRefGoogle Scholar
  7. 7.
    Liu K, Li XP, Rahman M et al (2007) A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers. Int J Adv Manufact Technol 32:631–637CrossRefGoogle Scholar
  8. 8.
    Lucca DA, Chou P, Hocken RJ (1998) Effect of tool edge geometry on the nanometric cutting of Ge. CIRP Ann 47:475–478CrossRefGoogle Scholar
  9. 9.
    Blackley WS, Scattergood RO (1994) Chip topography for ductile-regime machining of germanium. ASME T J Eng Ind 116:263–266CrossRefGoogle Scholar
  10. 10.
    Fang FZ, Venkatesh VC (1998) Diamond cutting of silicon with nanometric finish. CIRP Ann 47:45–49CrossRefGoogle Scholar
  11. 11.
    Moriwaki T, Shamoto E, Inoue K (1992) Ultraprecision ductile cutting of glass by applying ultrasonic vibration. CIRP Ann 41:141–144CrossRefGoogle Scholar
  12. 12.
    Shibata T, Fujii S, Makino E et al (1996) Ductile-regime turning mechanism of single-crystal silicon. Precis Eng 18:129–137CrossRefGoogle Scholar
  13. 13.
    Hung NP, Fu YQ (2000) Effect of crystalline orientation in the ductile-regime machining of silicon. Int J Adv Manufact Technol 16:871–876CrossRefGoogle Scholar
  14. 14.
    Komanduri R, Chandrasekaran N, Raff LM (2001) Molecular dynamics simulation of the nanometric cutting of silicon. Philos Mag B 81:1989–2019CrossRefGoogle Scholar
  15. 15.
    Yan JW, Syoji K, Tamaki J (2003) Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon. Wear 255:1380–1387CrossRefGoogle Scholar
  16. 16.
    Li XP, He T, Rahman M (2007) Tool wear characteristics and their effects on nanoscale ductile mode cutting of silicon wafer. Wear 25:1207–1214Google Scholar
  17. 17.
    Zong WJ, Sun T, Li D et al (2008) XPS analysis of the groove wearing marks on flank face of diamond tool in nanometric cutting of silicon wafer. Int J Mach Tools Manufact 48:1678–1687CrossRefGoogle Scholar
  18. 18.
    Inamura T, Shimada S, Takezawa N et al (1999) Crack initiation in machining monocrystalline silicon. CIRP Ann 48:81–84CrossRefGoogle Scholar
  19. 19.
    Arefin S, Li XP, Liu K (2007) The upper bound of tool edge radius for nanoscale ductile cutting of silicon wafer. Int J Adv Manufact Technol 31:655–662CrossRefGoogle Scholar
  20. 20.
    Liu K, Zuo DW, Li XP et al (2009) Nanometric ductile cutting characteristics of silicon wafer using single crystal diamond tools. J Vac Sci Technol B 27:1361–1366CrossRefGoogle Scholar
  21. 21.
    Liu K, Li XP, Liang SY (2007) The mechanism of ductile chip formation in cutting of brittle materials. Int J Adv Manufact Technol 33:875–884CrossRefGoogle Scholar
  22. 22.
    Boothroyd G, Knight WA (1989) Fundamentals of machining and machine tools. Marcel Dekker, New YorkGoogle Scholar
  23. 23.
  24. 24.
    Li XP, Rahman M, Liu K et al (2003) Nanoprecision measurement of diamond tool edge radius for wafer fabrication. J Mater Proc Technol 140:358–362CrossRefGoogle Scholar
  25. 25.
    Liu K, Li XP, Rahman M (2002) Study on surface topography in nanometric ductile cutting of silicon wafers. In: 4th EPTC Proceedings, Singapore, pp 200–205Google Scholar
  26. 26.
    Uddin MS, Seah KHW, Li XP et al (2004) Effects of crystalline orientation on wear of diamond tools for nano-scale ductile cutting of silicon. Wear 257:751–759CrossRefGoogle Scholar
  27. 27.
    Uddin MS, Seah KHW, Rahman M et al (2007) Performance of single crystal diamond tools in ductile mode cutting of silicon. J Mater Proc Technol 185:24–30CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Singapore Institute of Manufacturing TechnologySingaporeSingapore
  2. 2.Department of Mechanical EngineeringNational University of SingaporeSingaporeSingapore
  3. 3.School of Mechanical EngineeringShanghai Jiao Tong UniversityShanghaiChina

Personalised recommendations