Advertisement

Fused Deposition Modeling Using 6-Axis Industrial Robot

  • Arigela Sri Harsha
  • Chintamreddy Vikram KumarEmail author
Conference paper
Part of the Lecture Notes on Multidisciplinary Industrial Engineering book series (LNMUINEN)

Abstract

A conventional Fused Deposition Modeling (FDM) machine builds an object layer by layer on a horizontal platform from bottom to top fashion. The major drawback of the FDM machine is limited number of degree of freedom (only 3). Industrial robots with six degrees of freedom are capable to move its end effector in 3D space with high resolution and repeatability. A robot with an extruder as an end effector has the capability to print the objects on multiple planes. In this work, an attempt is made to simulate the FDM process with an industrial robot. Simulation of printing of a cube on horizontal and inclined planes is presented. Tool path for each sliced layer is developed using polygon-filling algorithm. The simulation of printing of 3D objects using 6-axis industrial robot is carried out using ABB RoboStudio simulation software.

Keywords

Additive manufacturing 3D printing Fused deposition modeling 

References

  1. 1.
    Gibson, I., Rosen, D.W., Stucker, B.: Additive Manufacturing Technologies. Springer (2010). ISBN: 978-1-4419-1119-3Google Scholar
  2. 2.
    Chee Kai, C., Kah Fai, L., Chu Sing, L.: Rapid Prototyping: Principles and Applications, 2nd edn. (2003). ISBN 981-238-117-1Google Scholar
  3. 3.
    Tsai, L.W.: Robot Analysis the Mechanics of Serial and Parallel Manipulators (1999)Google Scholar
  4. 4.
    Tse, W.C., Chen, Y.H.: A robotic system for rapid prototyping. In: Proceedings of the 1997 IEEE International Conference on Robotics and Automation, pp. 1815–1820 (1997)Google Scholar
  5. 5.
    Barnett, E., Gosselin, C.: Large-Scale 3D printing with a cable-suspended robot. Accepted manuscript Additive Manufacturing. Elsevier (2015)Google Scholar
  6. 6.
    Ishak, I., Larochelle, P.: Robot arm platform for rapid prototyping: Concept. In: Proceedings in Florida Conference on Recent Advances in Robotics, (2015)Google Scholar
  7. 7.
    Górski, F., Kuczko, W., Wichniarek, R.: Influence of process parameters on dimensional accuracy of parts manufactured using fused deposition modeling technology. Adv. Sci. Technol. Res. J. 7(19), 27–35 (2013)CrossRefGoogle Scholar
  8. 8.
    Nancharaiah, T., Ranga Raju, D., Ramachandra Raju, V.: An experimental investigation on surface quality and dimensional accuracy of FDM component. Int. J. Emerg. Technol. 1(2), 106–111 (2010)Google Scholar
  9. 9.
    Swanson, M., Spurgeon, W., Vass, T., Danielewicz, M.: 3D printing robotic arm. Project report, Worcester Polytechnic Institute (2016)Google Scholar
  10. 10.
    Eragubi, M.: Slicing 3D CAD model in STL format and laser path. Int. J. Innov. Manag. Technol. 4(4) (2013)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringJNTUAAnanthapuramuIndia
  2. 2.Department of Mechanical EngineeringN.B.K.R.I.S.TVidyanagar, Nellore DtIndia

Personalised recommendations