Advertisement

Experimental Evaluation of Surface Roughness, Dimensional Accuracy, and MRR in Cylindrical Grinding of EN 24 Steel

  • Pankaj V. MohireEmail author
  • Raju S. Pawade
Conference paper
Part of the Lecture Notes on Multidisciplinary Industrial Engineering book series (LNMUINEN)

Abstract

The present paper discusses the experimental results and analysis of PRSR, dimensional accuracy, and material removal rate as the responses in cylindrical grinding of EN24 steel. The work material chosen was EN24, a popular grade of thorough-hardening alloy steel. The Taguchi design of experiments using L18 orthogonal array was used. It is observed from the experimental work that the input factors depth of cut has statistically significant effect on the PRSR. Material removal rate increases linearly with increase in wheel speed. Dimensional deviation is maximum for work speed of 180 rpm and it is minimum for work speed of 250 rpm.

Keywords

Cylindrical grinding Surface roughness PRSR MRR Taguchi 

References

  1. 1.
    George, L.P., Job, K.V., Chandran, I.M.: Study on surface roughness and its prediction in cylindrical grinding process based on Taguchi method of optimization. Int. J. Sci. Res. Publ. 3(5), 1–5 (2013)Google Scholar
  2. 2.
    Kumar, N., Tripathi, H., Gandotra, S.: Optimization of cylindrical grinding process parameters on C40E steel using Taguchi technique. Int. J. Eng. Res. Appl. 5(1), 100–104 (2015)Google Scholar
  3. 3.
    Kumar, P., Kumar, A., Singh, B.: Optimization of process parameters in surface grinding using response surface methodology. IJRMET 3(2), 245–252 (2013)Google Scholar
  4. 4.
    Panthangi, R.K., Naduvinamani, V.: Optimization of surface roughness in cylindrical grinding process. Int. J. Appl. Eng. Res 12, 7350–7354 (2017)Google Scholar
  5. 5.
    Karande, M.R.J., Patil, M.K.R., Jadhav, S.M., Nanwatkar, R.K.: Optimization of cylindrical grinding machine parameters for minimum surface roughness and maximum MRR. GRD J. Glob. Res. Dev. J. Eng. 2(5) (2017)Google Scholar
  6. 6.
    Pawade, R.S., Joshi, S.S.: Multi-objective optimization of surface roughness and cutting forces in high-speed turning of inconel 718 using Taguchi grey relational analysis (TGRA). Int. J. Adv. Manuf. Technol. 56(1–4), 47–62 (2011)CrossRefGoogle Scholar
  7. 7.
    Saglam, H., Unsacar, F., Yaldiz, S.: An experimental investigation as to the effect of cutting parameters on roundness error and surface roughness in cylindrical grinding. Int. J. Prod. Res. 43(11), 2309–2322 (2005)Google Scholar
  8. 8.
    Jeevanantham, S., Sivaram, N.M., Smart, D.R., Nallusamy, S., Prabu, N.M.: Effect of machining parameters on MRR and surface roughness in internal grinding using EN8, EN31 steel. Int. J. Appl. Eng. Res. 12(11), 2963–2968 (2017)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringDr. Babasaheb Ambedkar Technological UniversityLonere, RaigadIndia

Personalised recommendations