Abstract
A series of experiments were carried out to machine aluminium nitride (AIN) ceramic by die-sinking electro-discharge machining (EDM) process. EDM is a non-conventional machining process that requires the workpiece to be electrically conductive. An assisted-electrode method is used to make the surface of the workpiece conductive enough to machine. A combination of graphene paste, carbon nanotube, and copper tape has been used to make the coating surface. Tungsten carbide tool has been used. The findings indicate that, for low pulse energy, it is possible to generate through holes in this process. A combination of low peak current and high gap voltage proved to be successful in this method. The surface of the machined hole reveals that thermal spalling is present as material removal mechanism, which results in a rough surface. The energy dispersive spectroscopy (EDS) analysis proves that carbon deposition occurs in the wall of the holes to promote successful machining. Copper is also present in the machined surface. A feasible process has been developed to machine AIN ceramics using EDM process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Uhlmann E, Domingos DC (2013) Investigations on vibration-assisted EDM-machining of seal slots in high-temperature resistant materials for turbine components. Proc CIRP 6:71–76
Sabyrov N, Jahan MP et al (2019) Ultrasonic vibration assisted electro-discharge machining (edm)—an overview. Materials 12(3):522
Kumar S, Kumar A, Kumar V, Singh NK (2018) Study of machining of Inconel 825 super alloy using powder mixed EDM process. Mater Today Proc 5(9):18129–18134
Chen X, Wang Z, Xu J et al (2018) Sustainable production of micro gears combining micro reciprocated wire electrical discharge machining and precision forging. J Clean Prod 188:1–11
Bilal A, Jahan MP et al (2019) Electro-discharge machining of ceramics: a review. Micromachines 10(1):10
Yongfeng G, Yerui F et al (2018) Experimental investigation of EDM parameters for ZrB2 -SiC ceramics machining. Proc CIRP 68:46–51
Schumacher BM (2004) After 60 years of EDM the discharge process remains still disputed. J Mater Process Technol 149(1):376–381
König W, Dauw DF et al (1988) EDM-future steps towards the machining of ceramics. CIRP Ann 37(2):623–631
Mohri N, Fukuzawa Y, Tani T, Saito N, Furutani K (1996) Assisting electrode method for machining insulating ceramics. CIRP Ann 45(1):201–204
Hösel T, Müller C et aò (2011) Spark erosive structuring of electrically nonconductive zirconia with an assisting electrode. CIRP J of Manuf Sci Tech 4(4):357–361
Dalkılıç AS et al (2018) Experimental study on the thermal conductivity of water-based CNT-SiO2 hybrid nanofluids. Int Commun Heat Mass Transf 99:18–25
Van Trinh P, Anh NN et al (2018) Experimental study on the thermal conductivity of ethylene glycol-based nanofluid containing Gr-CNT hybrid material. J Mol Liq 269:344–353
Hassanzadeh-Aghdam MK, Mahmoodi MJ et al (2018) Effect of CNT coating on the overall thermal conductivity of unidirectional polymer hybrid nanocomposites. Int J Heat Mass Transf 124:190–200
Chaudhury P, Samantaray S (2017) Role of carbon nano tubes in surface modification on electrical discharge machining a review. Mater Today Proc 4(2):4079–4088
Hanaoka D, Fukuzawa Y, Ramirez C et al (2013) Electrical discharge machining of ceramic/carbon nanostructure composites. Proc CIRP6:95–100
Sarsen A, Bilal A et al (2019) Assistive electro discharge machining of AIN ceramics. Mater Sci Forum 947:109–113
Acknowledgements
This research study is funded by Nazarbayev University under the project “Multi-scale Investigation of the Machining Behaviour of Non-conductive Ceramics Using Electro-Discharge Machining” (Grant No: 090118FD5324).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Rashid, A., Jahan, M.P., Talamona, D., Perveen, A. (2020). Feasibility Study of Through Hole Fabrication on Aluminium Nitride Ceramic Using Die-Sinking Electro-Discharge Machining. In: Emamian, S.S., Awang, M., Yusof, F. (eds) Advances in Manufacturing Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-5753-8_49
Download citation
DOI: https://doi.org/10.1007/978-981-15-5753-8_49
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-5752-1
Online ISBN: 978-981-15-5753-8
eBook Packages: EngineeringEngineering (R0)