Advertisement

Optimizations of Process Parameters for Friction Stir Welding of Aluminium Alloy Al 7050

  • Vineet Chak
  • V. M. S. Hussain
  • Mayank Verma
Conference paper
  • 46 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In the present study, an attempt is made to evaluate the effect of process parameters on mechanical properties of but welded similar plates of Al 7050 by friction stir welding (FSW) process. The process parameters play a significant role in achieving the desired characteristics and properties of welded joints. For the effective use of welded plates, welded joints must have adequate strength. The process parameters such as tool transverse speed and its rotation speed were varied for 03 levels and optimized by Taguchi technique. The optimum levels of process parameters were determined. It was concluded that process parameters play an important role in the mechanical properties and the micro-structure of the joints.

Keywords

Friction stir welding Al 7050 Optimization Taguchi array 

References

  1. 1.
    Vignesh VR, Padmanaban R, Arivarasu M, Thirumalini S, Gokulachandran J, Ram MSSS (2016) Numerical modelling of thermal phenomenon in friction stir welding of aluminum plates. Mater Sci Eng 149:012208.  https://doi.org/10.1088/1757-899X/149/1/012208CrossRefGoogle Scholar
  2. 2.
    Yuan W, Mishra RS, Webb S, Chen YL, Carlson B, Herling DR, Grantg J (2011) Effect of tool design and process parameters on properties of Al alloy 6016 friction stir spot welds. J Mater Process Technol 211(6):972–977Google Scholar
  3. 3.
    Rodriguez RI, Jordon JB, Allison PG, Rushing T, Garcia L (2015) Microstructure and mechanical properties of dissimilar friction stir welding of 6061-to-7050 aluminum alloys. Mater Des 83(15):60–65CrossRefGoogle Scholar
  4. 4.
    Effertz PS, Quintino L, Infante V (2017) The optimization of process parameters for friction spot welded 7050-T76 aluminium alloy using a Taguchi orthogonal array. Int J Adv Manufact Technol 91(9–12):3683–3695Google Scholar
  5. 5.
    Tebbe PA, Kridli GT (2004) Warm forming of aluminium alloys: an overview and future directions. Int J Mater Prod Technol 21(1–3):24–40Google Scholar
  6. 6.
    Dawes C, Thomas W (1995) TWI bulletin 6, November/December 1995, p 124Google Scholar
  7. 7.
    Bozkurt Y, Bilici KM (2013) Application of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys. Mater Des 51:513–521Google Scholar
  8. 8.
    Nandan R, DebRoy T, Bhadeshia HKDH (2008) Recent advances in friction-stir welding—process, weldment structure and properties. Prog Mater Sci, 53(6):980–1023Google Scholar
  9. 9.
    Sharma C, Upadhyay V, Dwivedi DK, Kumar P (2017) Mechanical properties of friction stir welded armor grade Al–Zn–Mg Alloy joints. Trans Nonferrous Metals Soc China 27(3):493–506CrossRefGoogle Scholar
  10. 10.
    Sharma C, Dwivedi DK, Kumar P (2015) Influence of pre-weld temper conditions of base metal on microstructure and mechanical properties of friction stir weld joints of Al–Zn–Mg alloy AA7039. Mater Sci Eng A 620(3):107–119CrossRefGoogle Scholar
  11. 11.
    Dawood HI, Mohammed KS, Rahmat A, Uday MB (2015) Effect of small tool pin profiles on microstructures and mechanical properties of 6061 aluminum alloy by friction stir welding. Trans Nonferrous Metals Soc China 25(9):2856–2865CrossRefGoogle Scholar
  12. 12.
    Komarasamy M, Alagarsamy K, Ely L, Mishra RS (2018) Characterization of 3″ through-thickness friction stir welded 7050-T7451 Al alloy. Mater Sci Eng, A 716(14):55–62CrossRefGoogle Scholar
  13. 13.
    Himmaraju P, Arkanti K, Reddy GCM, Tilak KBG (2016) Comparison of microstructure and mechanical properties of friction stir welding of Al 6082 aluminum alloy with different tool profiles. Mater Today Proc 3(10):4173–4181Google Scholar
  14. 14.
    Shah PH, Badheka VJ Friction stir welding of aluminium alloys: an overview of experimental findings—process, variables, development and applications. J Mater Des Appl 0(0):1–36.  https://doi.org/10.1177/146442071668958
  15. 15.
    Threadgill PL, Leonard AJ, Shercliff HR, Withers PJ (2009) Friction stir welding of aluminium alloys. J Int Mater Rev 54:49–93| Published online: 18 Jul 2013Google Scholar
  16. 16.
    Gibson BT, Lammlein DH, Prater TJ, Longhurst WR, Cox CD, Ballun MC, Dharmaraj KJ, Cook GE, Strauss AM (2014) Friction stir welding: process, automation, and control. J Manuf Process 16(1):56–73CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Vineet Chak
    • 1
  • V. M. S. Hussain
    • 2
  • Mayank Verma
    • 2
  1. 1.Department of Forge TechnologyNIFFTHatia, RanchiIndia
  2. 2.Department of Manufacturing EngineeringNIFFTHatia, RanchiIndia

Personalised recommendations