Advertisement

Investigation on the effects of wall slenderness on failure behavior of DCM wall using a simplified small-scale physical model test

  • Siriwan WaichitaEmail author
  • Pornkasem Jongpradist
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 62)

Abstract

This paper presents behavior of DCM walls up to failure state, described by small scale experimental results. Ground spring model is adopted in the setting up of the physical model to solve the problem of down scaling. DCM walls with various slenderness at a certain volume have been experimented to illustrate the shape effects on the behaviors, especially in the failure state. Effects of wall shape on wall failure modes, i.e., wall structural failure and external soil failure have been captured, which are in accordance with the potential failure related to wall-to-excavation shape factor in our previous study.

Keywords

DCM wall slenderness failure physical model 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Bowles, J. E. (1996). Foundation Analysis and Design. The McGraw-Hill Companies, Inc. (5th ed.).Google Scholar
  2. Briaud, J.-L., Nicholson, P., & Lee, J. (2000). Behavior of Full-Scale VERT Wall in Sand. Journal of Geotechnical and Geoenvironmental Engineering, 126(9), pp 808–818.Google Scholar
  3. Jamsawang, P., Jamnam, S., Jongpradist, P., Tanseng, P., & Horpibulsuk, S. (2017). Numerical analysis of lateral movements and strut forces in deep cement mixing walls with top-down construction in soft clay. Computers and Geotechnics, 88, pp 174–181.Google Scholar
  4. Jongpradist, P., Tunsakul, J., Kongkitkul, W., Fadsiri, N., Arangelovski, G., & Youwai, S. (2015). High internal pressure induced fracture patterns in rock masses surrounding caverns: Experimental study using physical model tests. Engineering Geology, 197, 158–171.Google Scholar
  5. Koseki, J., Tsutsumi, Y., Namikawa, T., Mihira, S., Salas-Monge, R., Sano, Y., & Nakajima, S. (2008). Shear and tensile properties of cementtreated sands and their application to mitigation of liquefaction-induced damage. Deformational Characteristics of Geomaterials, pp 27–50.Google Scholar
  6. Lee, S. A. (2014). Characterization and Modeling of Cement-Treated Soil Column Used as Cantilever Earth Retaining Structure. PhD thesis. National University of Singapore.Google Scholar
  7. Mun, B., Kim, T., Moon, T., & Oh, J. (2012). SCM wall in sand: Numerical simulation and design implications. Engineering Geology, pp 151, 15–23.Google Scholar
  8. Shao, Y., Macari, E. J., & Cai, W. (2005). Compound Deep Soil Mixing Columns for Retaining Structures in Excavations. Journal of Geotechnical and Geoenvironmental Engineering, 131(November),pp 1370–1377.Google Scholar
  9. Tunsakul, J., Jongpradist, P., Kongkitkul, W., Wonglert, A., & Youwai, S. (2013). Investigation of failure behavior of continuous rock mass around cavern under high internal pressure. Tunnelling and Underground Space Technology, 34,pp 110–123.Google Scholar
  10. Waichita, S., Jongpradist, P., & Submaneewong, C. (2017). Application of ground spring model in excavation supported by deep cement mixing. International Journal of GEOMATE, 12(31), pp 30–36.Google Scholar
  11. Waichita, Siriwan, Jongpradist, P., & Jamsawang, P. (2019). Characterization of deep cement mixing wall behavior using wall-to-excavation shape factor. Tunnelling and Underground Space Technology, 83, pp 243–253.  https://doi.org/10.1016/j.tust.2018.09.033.CrossRefGoogle Scholar
  12. Wood, D. M. (2004). Geotechnical Modelling. CRC Press.Google Scholar
  13. Xu, Z. H. (2007). Deformation Behavior of Deep Excavations Supported by Permanent Structure in Shanghai Soft Deposit. Shanghai.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.University of Technology ThonburiBangkokThailand

Personalised recommendations