Advertisement

Keynote Lecture: Application of Advanced Numerical Analysis in Geotechnical Engineering Design

  • Lidija ZdravkovićEmail author
  • David M. Potts
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 62)

Abstract

Geotechnical analysis is an integral part of the geotechnical design process. It is performed with the aim of assessing the stability and serviceability of geotechnical structures and their interaction with the natural and built environment. The complexities of many geotechnical problems and requirements for long-term design solutions increasingly require the use of advanced numerical analysis. This paper explores the application of advanced numerical tools in the lifecycle assessment of infrastructure slopes in stiff clays and of earthfill infrastructure embankments.

Keywords

numerical analysis constitutive models boundary conditions 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. Abbo, A.J., & Sloan, S.W. 1996. An automatic load stepping algorithm with error control. Int. J. Num. Meth. In Eng. 39: 1737–1759.Google Scholar
  2. Alonso, E.E., Gens, A., & Josa, A. 1990. A constitutive model for partially saturated soils. Géotechnique 40 (3): 405–430.Google Scholar
  3. Bazant, Z.P. & Jirasek, M. 2002. Nonlocal integral formulations of plasticity and damage: survey of progress. Jnl. Eng. Mechanics 128 (11): 1119–1149.Google Scholar
  4. Brosse, A. 2012. Study of the anisotropy of three British mudrocks using a hollow cylinder apparatus. Ph.D. thesis, Imperial College London.Google Scholar
  5. Dounias, G.T., Potts, D.M. & Vaughan, P.R. 1996. Analysis of progressive failure and cracking in old Brithish dams. Géotechnique 46 (4): 621–640.Google Scholar
  6. Feddes, R.A., Kowalk, P.J., & Zaradny, H. 1978. Simulation of field water use and crop yield. John Wiley & Sons, New York.Google Scholar
  7. Galavi, V. & Schweiger, H.F. 2010. Nonlocal multilaminate model for strain softening analysis. Int. Jnl. Geomechanics 10: 30–44.Google Scholar
  8. Gasparre, A. 2005. Advanced laboratory characterisation of London clay. PhD thesis, Imperial College London.Google Scholar
  9. Georgiadis, K., Potts, D.M., & Zdravkovic, L. 2005. Three-dimensional constitutive model for partially and fully saturated soils. ASCE Int. J. Geomech. 5 (3): 244–255.Google Scholar
  10. Guo B.W.L. 2020. Resilience and sustainability of flood defenses. PhD thesis, Imperial College London.Google Scholar
  11. Hight, D.W., McMillan, F., Powell, J.J., Jardine, R.J. & Allenou, C.P. 2003. Some characteristics of London Clay. Proc. Int. Workshop on characterization and engineering properties of natural soils, Singapore, Vol. 2:81–908.Google Scholar
  12. Ho, X. 2019. Assessment of serviceability and stability of sloped excavations in stiff clay. MEng internal project. Imperial College London.Google Scholar
  13. Hosseini Kamal, R. 2012. Experimental study of the geotechnical properties of UK mudrocks. Ph.D. thesis, Imperial College London.Google Scholar
  14. Hosseini Kamal, R., Coop, M.R., Jardine, R.J. & Brosse, A. 2014. The post-yield behavior of four Eocene-to-Jurassic UK stiff clays. Géotechnique 64 (8): 620–634.Google Scholar
  15. Kovacevic, N. 1994. Numerical analysis of rockfill dams, cut slopes and road embankments. PhD thesis, Imperial College, University of London.Google Scholar
  16. Kovacevic, N., Hight, D.W. & Potts, D.M. 2007. Predicting the stand-up time of temporary London Clay slopes at Terminal 5, Heathrow Airport. Géotechnique 47 (5): 953–982.Google Scholar
  17. Potts, D.M., Dounias, G.T., & Vaughan, P.R. 1990. Finite element analysis of progressive failure of Carsington embankment. Géotechnique 40 (1): 79–101.Google Scholar
  18. Potts, D.M., Kovacevic, N., & Vaughan, P.R. 1997. Delayed collapse of cut slopes in stiff clay. Géotechnique 47 (5): 953–982.Google Scholar
  19. Potts, D.M, & Zdravkovic, L. 1999. Finite element analysis in geotechnical engineering: theory. Thomas Telford, London.Google Scholar
  20. Potts, D.M, & Zdravkovic, L. 2001. Finite element analysis in geotechnical engineering: application. Thomas Telford, London.Google Scholar
  21. Potts, D.M., & Zdravkovic, L. 2012. Accounting for partial material factors in numerical analysis. Géotechnique 62 (12): 1053–1065.Google Scholar
  22. Sheng, D., & Sloan, S.W. 2001. Load stepping schemes for critical state models. Int. J. Num. Meth. Eng. 50: 67–93.Google Scholar
  23. Smith, P.G.C. 2003. Numerical analysis of infiltration into partially saturated soil slopes. PhD thesis, Imperial College, University of London.Google Scholar
  24. Smith, P.G.C., Potts, D.M., & Addenbrooke, T.I. 2008. A precipitation boundary condition for finite element analysis. In: Unsaturated soils: Advances in geo-engineering. Eds. Toll, D.G., Augarde, C.E., Gallipoli, D. & Wheeler, S.J. CRC Press: 773–778.Google Scholar
  25. Summersgill, F.C. 2015. Numerical modelling of stiff clay cut slopes with nonlocal strain regularisation. Ph.D. thesis, Imperial College London.Google Scholar
  26. Summersgill, F.C., Kontoe S. & Potts, D.M. 2017. On the use of nonlocal regularisation in slope stability problems. Computers and Geotechnics 82: 187–200.Google Scholar
  27. Taborda, D.M.G. & Zdravkovic, L. 2012. Application of a Hill-Climbing technique to the formulation of a new cyclic nonlinear elastic constitutive model. Computers and Geotechnics 43: 80–91.Google Scholar
  28. Taborda, D.M.G., Potts, D.M. & Zdravković, L. 2016. On the assessment of energy dissipated through hysteresis in finite element analysis. Computers and Geotechnics 71: 180–194.Google Scholar
  29. Tsiampousi, A., Zdravkovic, L., & Potts, D.M. 2013a. A three-dimensional hysteretic soil-water retention curve. Géotechnique 63 (2): 155–164.Google Scholar
  30. Tsiampousi, A., Zdravkovic, L., & Potts, D.M. 2013b. A new Hvorslev surface for critical state type unsaturated and saturated constitutive models. Computers and Geotechnics 48: 156–166.Google Scholar
  31. Tsiampousi, A., Smith, P.G.C., & Potts, D.M. 2017a., Coupled consolidation in unsaturated soils: An alternative approach to deriving the governing equations. Computers and Geotechnics 84: 238–255.Google Scholar
  32. Tsiampousi, A., Smith, P.G.C., & Potts, D.M. 2017b., Coupled consolidation in unsaturated soils: From a conceptual model to applications in boundary value problems. Computers and Geotechnics 84: 256–277.Google Scholar
  33. Tsimapousi, A., Zdravkovic, L., & Potts, D.M. 2017c. Numerical study of the effect of soil atmosphere interaction on the stability and serviceability of cut slopes in London clay. Can. Geotech. J. 54: 405–418.Google Scholar
  34. Van Genuchten, M.T. 1980. A close-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil. Sci. Soc. Am. J. 44: 892–898.Google Scholar
  35. Vardulakis, I.G. & Sulem, J. 1995. Bifurcation analysis in geomaterials. Chapman & Hall, London.Google Scholar
  36. Vaughan, P.R. 1994. Assumption, prediction and reality in geotechnical engineering. Géotechnique 44 (4): 573–609.CrossRefGoogle Scholar
  37. Vermeer, P.A. & Brinkgrave, R.B.J. 1994. A new effective non-local strain measure for softening plasticity. In Localisation and bifurcation theory for soils and rocks. Eds. Chambon, R., Desrues, J. & Vardoulakis, I.G., 89–100, Rotterdam, Balkema.Google Scholar
  38. Walbancke, H.J. 1976. Pore pressures in clay embankments and cuttings. PhD thesis, Imperial College, University of London.Google Scholar
  39. Zdravković, L., Tsiampousi, A. & Potts. D.M. 2018. On the modelling of soil-atmosphere interaction in cut and natural slopes. 7th Int. Conf. on Unsaturated Soils UNSAT 2018. Eds. Ng, C.W.W., Leung, A.K., Chiu, A,C.F. & Zhou, C. HKUST, Hong Kong.Google Scholar
  40. Zdravković, L., Potts, D.M. & Taborda, D.M.G. 2019. Integrating laboratory and field testing into advanced geotechnical design. 7th Int. Sym. on Deformation Characteristics of Geomaterials, ISGlasgow 2019, Eds. Tarantino, A. & Ibraim, E. EDP Sciences.Google Scholar
  41. Zervos, A., Papanastasiou, P. & Vardoulakis, I. 2001. Finite element displacement formulation for gradient elastoplasticity. Int. Jnl. Numer. Meth. Engineering 50 (6): 1369–1388.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Imperial College LondonLondonUnited Kingdom

Personalised recommendations