Advertisement

Type Synthesis of Mechanisms with Invariable Rotation Axes

  • Tao SunEmail author
  • Shuofei Yang
  • Binbin Lian
Chapter
  • 7 Downloads
Part of the Springer Tracts in Mechanical Engineering book series (STME)

Abstract

Mechanisms with invariable and variable rotation axes [1, 2, 3, 4] are of interest in this book because the type synthesis of these mechanisms has not been thoroughly investigated due to the limitation of the adopted mathematical tools.

References

  1. 1.
    Kong XW, Gosselin CM (2007) Type synthesis of parallel mechanisms. Springer, BerlinzbMATHGoogle Scholar
  2. 2.
    Yang SF, Sun T, Huang T (2017) Type synthesis of parallel mechanisms having 3T1R motion with variable rotational axis. Mech Mach Theory 109:220–230CrossRefGoogle Scholar
  3. 3.
    Qi Y, Sun T, Song YM (2017) Type synthesis of parallel tracking mechanism with varied axes by modeling its finite motions algebraically. ASME J Mech Robot 9(5):054504 (6 pages)Google Scholar
  4. 4.
    Sun T, Huo XM (2018) Type synthesis of 1T2R parallel mechanisms with parasitic motions. Mech Mach Theory 128:412–428CrossRefGoogle Scholar
  5. 5.
    Sun T, Yang SF, Huang T et al (2017) A way of relating instantaneous and finite screws based on the screw triangle product. Mech Mach Theory 108:75–82CrossRefGoogle Scholar
  6. 6.
    Li QC, Huang Z (2003) A family of symmetrical lower-mobility parallel mechanisms with spherical and parallel subchains. J Robot Syst 20(6):297–305CrossRefGoogle Scholar
  7. 7.
    Bonev IA, Zlatanov D, Gosselin CM (2003) Singularity analysis of 3-DOF planar parallel mechanisms via screw theory. ASME J Mech Des 125(3):573–581CrossRefGoogle Scholar
  8. 8.
    Kong XW, Gosselin CM (2005) Type synthesis of 3-DOF PPR-equivalent parallel manipulators based on screw theory and the concept of virtual chain. ASME J Mech Des 127(6):1113–1121CrossRefGoogle Scholar
  9. 9.
    Kong XW, Gosselin CM (2004) Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory. IEEE Trans Robot Autom 20(2):181–190CrossRefGoogle Scholar
  10. 10.
    Carricato M (2005) Fully isotropic four-degrees-of-freedom parallel mechanisms for Schoenflies motion. Int J Robot Res 24(5):397–414CrossRefGoogle Scholar
  11. 11.
    Lee CC, Hervé JM (2009) Type synthesis of primitive Schoenflies-motion generators. Mech Mach Theory 44(10):1980–1997CrossRefGoogle Scholar
  12. 12.
    Lee CC, Hervé JM (2009) On some applications of primitive Schönflies-motion generators. Mech Mach Theory 44(12):2153–2163CrossRefGoogle Scholar
  13. 13.
    Lee CC, Hervé JM (2011) Isoconstrained parallel generators of Schoenflies motion. ASME J Mech Robot 3(2):021006 (10 pages)Google Scholar
  14. 14.
    Lee CC, Hervé JM (2006) Translational parallel manipulators with doubly planar limbs. Mech Mach Theory 41(4):433–455MathSciNetCrossRefGoogle Scholar
  15. 15.
    Li QC, Hervé JM (2009) Parallel mechanisms with bifurcation of Schoenflies motion. IEEE Trans Rob 25(1):158–164CrossRefGoogle Scholar
  16. 16.
    Lee CC, Hervé JM (2010) Generators of the product of two Schoenflies motion groups. Eur J Mech-A/Solids 29(1):97–108MathSciNetCrossRefGoogle Scholar
  17. 17.
    Siciliano B (1999) The Tricept robot: inverse kinematics, manipulability analysis and closed-loop direct kinematics algorithm. Robotica 17(4):437–445CrossRefGoogle Scholar
  18. 18.
    Zhang D, Gosselin CM (2002) Kinetostatic analysis and design optimization of the Tricept machine tool family. ASME J Manuf Sci Eng 124(3):725–733CrossRefGoogle Scholar
  19. 19.
    Joshi S, Tsai LW (2003) A comparison study of two 3-DOF parallel manipulators: one with three and the other with four supporting legs. IEEE Trans Robot Autom 19(2):200–209CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.School of Mechanical EngineeringTianjin UniversityTianjinChina

Personalised recommendations