Advertisement

Additive Manufacturing for Cost Efficient Hybrid Welding Jigs

  • Kolja LichtenthälerEmail author
  • Georg Bergweiler
  • Achim Kampker
  • Ansgar Hollah
  • Sebastian Leimbrink
Conference paper
  • 66 Downloads
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The use of the Additive Manufacturing (AM) process Fused Filament Fabrication (FFF) for the manufacturing of pre-series welding jigs for car body assemblies shows potential in terms of cost reduction and design flexibility. A conventional welding jig consists of standard parts and machined parts which can cause high costs in manufacturing. Although many simpler 2D parts which can be cut very economically are used as well, some of those parts have to be machined again in order to integrate all functional features. Additional manufacturing steps cause additional costs and prolong the supply process of those parts. A hybrid jig system that consists of part specific FFF components and standard elements has been developed for the welding of car body assemblies in the pre-series vehicle production. In order to analyse cost and time advantages, an economic assessment is used. It is aimed to determine whether the use of a hybrid jig system for welding operations of car body prototypes generates lower financial and time expenditures compared to conventional welding jigs. The assessment includes a detailed comparison between the manufacturing of a hybrid welding jig and a conventional welding jig for car body assemblies. Additive Manufacturing (AM) of the complex and specific parts with FFF offers time and cost advantages because material and process costs are lower than with milling, and process chains can be simplified. This paper presents the results of the assessment on the hybrid welding jig system and shows the overall potential in the pre-series vehicle production.

Keywords

Additive manufacturing Body shop Fused filament fabrication Welding jig 

References

  1. Atzeni E, Salmi A (2012) Economics of additive manufacturing for end-usable metal parts. Int J Adv Manuf Technol 62:1147–1155Google Scholar
  2. Bichler M, Böhm T, Kampker A, Triebs J (2018) Challenges for car body shops of electric sports cars. In: Bargende M, Reuss H-C, Wiedemann J (eds) Proceedings of the 18. Internationales Stuttgarter Symposium. Springer Fachmedien, Wiesbaden, p 507Google Scholar
  3. Fritzsche R, Neugebauer R, Pfeifer M, Waltl H (2012) Intelligenter Karosseriebau: Ressourceneffizienter Anlagenanlauf im Karosseriebau durch automatisch justierbare VorrichtungenGoogle Scholar
  4. Gebhardt A, Kessler J, Thurn L (2016) 3D-Drucken: Grundlagen und Anwendungen des Additive Manufacturing (AM), 2nd edn. Hanser, MünchenGoogle Scholar
  5. Guo N, Leu MC (2013) Additive manufacturing: technology, applications and research needs, p 215Google Scholar
  6. Hansen JO, Kampker A, Triebs J (2018) Approaches for flexibility in the future automobile body shop: results of a comprehensive cross-industry study, p 995Google Scholar
  7. Hesse S, Krahn H, Eh D (2012) Betriebsmittel Vorrichtung: Grundlagen und kommentierte Beispiele, 2nd edn. Hanser, MünchenGoogle Scholar
  8. Hoffman EG (2004) Jig and fixture design, 5th edn. Delmar Publishers, Albany, NYGoogle Scholar
  9. Kühn KD, Fritz AH, Förster R, Hoffmeister HW (2018) Trennen. In: Fritz A (ed) Fertigungstechnik. Springer Vieweg, BerlinGoogle Scholar
  10. Markforged Inc. (2019) Tooling & fixtures (online). https://markforged.com/application/tooling/. Accessed 24 Mar 2019
  11. Schmidt T (2015) Potentialbewertung generativer Fertigungsverfahren für Leichtbauteile. Thesis (Ph.D.), Technischen Universität Hamburg-HarburgGoogle Scholar
  12. Schuh G, Stölzle W, Straube F (2008) Anlaufmanagement in der Automobilindustrie erfolgreich umsetzen. Springer, BerlinGoogle Scholar
  13. Stratasys, Inc. (2019) Additive manufacturing for jigs, fixtures and other factory floor tools (online). https://www.stratasys.com/resources/search/whitepapers/3d-printing-jigs-fixtures-manufacturing-tools. Accessed 24 Mar 2019
  14. Thompson MK, Moroni G, Vaneker T, Fadel G, Campbell RI, Gibson I, Bernard A, Schulz J, Graf P, Ahuja B, Martina F (2016) Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints, p 737Google Scholar
  15. Trummer A, Wiebach H (1994) Vorrichtungen der Produktionstechnik. Vieweg+Teubner Verlag, WiesbadenGoogle Scholar
  16. Zhang J, Yang J, Li B (2009) Development of a reconfigurable welding fixture system for automotive body. IEEE, Piscataway, NJGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Kolja Lichtenthäler
    • 1
    Email author
  • Georg Bergweiler
    • 1
  • Achim Kampker
    • 2
  • Ansgar Hollah
    • 2
  • Sebastian Leimbrink
    • 2
  1. 1.Laboratory for Machine Tools and Production Engineering (WZL)RWTH Aachen UniversityAachenGermany
  2. 2.Production Engineering of E-Mobility Components (PEM)RWTH Aachen UniversityAachenGermany

Personalised recommendations