Advertisement

Experimental Investigation of Ball Burnishing Process Parameters Optimization for Al 5083 Using Taguchi Method

  • M. JawaharEmail author
  • J. Suresh kumar
  • M. Srikiran
  • Shiek Ismail
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The present work focuses on optimizing the newly designed ball burning tool using Taguchi analysis method experiment on traditional lathe machine with process parameters for burning. The test piece and ball materials used are Aluminum Alloy 5083 with different percentages of zirconium and high carbon chromium with 6 mm diameter. The levels of parameters of the input process parameters are selected on the basis of one element at a time of the experiment: burning feed, burning rate, and material composition. The response parameters are hardness and roughness of the surface. The main objective of this study is to compare surface roughness and surface hardness values on a workpiece of 100% aluminum alloy and aluminum (99%, 98%) with zirconium (+1%, +2%).

Keywords

Ball burning tool parameters for burning Hardness Optimization of surface roughness Taguchi technique 

References

  1. 1.
    Jayakrishnan J, Suraj R Effect of roller burnishing process on tool steel material using Cnc lathe. J Des Manufact Technol 5:155–159Google Scholar
  2. 2.
    Rakic R, Rakic Z (2002) The Influence of the metal working fluids on machine tool failures, vol 252(5–6), pp 438–444Google Scholar
  3. 3.
    Banerjee S, Mithra S, Panja B Using Taguchi method. J Mech Civ Eng 13:46–50Google Scholar
  4. 4.
    Solanki RG, Patel KA, Dhruv RB Effect of burnishing system parameters on surface quality. IJEDR 4. ISSN: 2321-9939Google Scholar
  5. 5.
    Kumar P, Purohit GK Design and development of ball burnishing tool. J Eng Res Technol 6:733–738Google Scholar
  6. 6.
    Stalin B, Murugan C Evaluation of mechanical behavior of aluminium alloy boron carbide MMC. In: International conference on emerging engineering trends and science (ICEETS – 2016). ISSN: 2348-8360Google Scholar
  7. 7.
    Tripathi H, Pungotra H, Gandotra S, Beri N (2013) Experimental investigation into ball burnishing process of brass using Taguchi approach. J Sci Eng Res 4(8)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • M. Jawahar
    • 1
    Email author
  • J. Suresh kumar
    • 2
  • M. Srikiran
    • 1
  • Shiek Ismail
    • 3
  1. 1.Mechanical EngineeringJayamukhi Institute of Technological SciencesWarangalIndia
  2. 2.Mechanical EngineeringJNTUHHyderabadIndia
  3. 3.Mechanical EngineeringVidya Jyothi Institute of TechnologyHyderabadIndia

Personalised recommendations