Advertisement

A Compact Ultra-Wideband (UWB) Antenna with Dual Band-Notched Characteristic Based on Small-Size Electromagnetic Bandgap (EBG) Structure

  • Mahadu A. TrimukheEmail author
  • Balaji G. Hogade
Conference paper
Part of the Lecture Notes on Data Engineering and Communications Technologies book series (LNDECT, volume 36)

Abstract

In this paper, a compact printed monopole square-shape meandering line antenna for ultra-wideband (UWB) application with dual band-notched characteristic is presented. Voltage standing wave ratio (VSWR) < 2 is obtained from 2.6 to 12 GHz except over two notched bands from 3.5 to 4.5 GHz, WiMAX/C-band satellite communication, and 5.0–5.5 GHz, WLAN applications. By introducing a small-size four-corner symmetry plane (FCSP) and square patch with single disconnected loop (SPSDL) EBGs structure, placed on near the feed line and back side of the radiating patch, two band-notched frequencies have been achieved. The proposed antenna is small in size with a compact EBG structure and offers nearly omnidirectional radiation pattern for UWB application.

Keywords

Electromagnetic bandgap (EBG) Frequency band rejection UWB 

References

  1. 1.
    FCC (2002) First report and order on ultra-wideband technologyGoogle Scholar
  2. 2.
    Zaker R, Abdipour A (2010) A very compact ultrawideband printed omnidirectional monopole antenna. IEEE Antennas Wirel Propag Lett 9:471–473CrossRefGoogle Scholar
  3. 3.
    Fereidoony F, Chamaani S, Mirtaheri SA (2012) Systematic design of UWB monopole antennas with stable omnidirectional radiation pattern reducing ground-plane effects on UWB monopole antennas. IEEE Antennas Wirel Propag Lett 11:752–755CrossRefGoogle Scholar
  4. 4.
    Trimukhe MA, Hogade BG (2018) Miniature low profile UWB Antenna with defective ground plane. In: Proceedings of IEEE international conference on inventive communication and computational technologies, pp 111–114Google Scholar
  5. 5.
    Bakariya PS, Dwari S, Sarkar M (2015) A triple band notch compact UWB printed monopole antenna. Wirel Pers Commun 82(2):1095–1106CrossRefGoogle Scholar
  6. 6.
    Li WT, Hei YQ (2012) Design of a ultra-wide band antenna with multiple band notch characteristics. J Electromagn Waves Appl 26:942–951CrossRefGoogle Scholar
  7. 7.
    Fan ST, Yin YZ, Li H, Kang L (2011) A novel self-similar antenna for UWB applications with band-notched characteristics. Prog Electromagn Res Lett 22:1–8CrossRefGoogle Scholar
  8. 8.
    Dong YD, Hong W, Kuai ZQ, Chen JX (2009) Analysis of planar ultra-wideband antennas with on-ground slot band-notched structures. IEEE Trans Antennas Propag 57(7):1886–1893CrossRefGoogle Scholar
  9. 9.
    Abedian M, Rahim SKA, Danesh S, Hakimi S, Cheong LY, Jamaluddin MH (2015) Novel design of compact UWB dielectric resonator antenna with dual-band-rejection characteristics for WiMAX/WLAN bands. IEEE Antennas Wirel Propag Lett 14:245–248CrossRefGoogle Scholar
  10. 10.
    Yazdi M, Komjani N (2011) A compact band-notched UWB planar monopole antenna with parasitic elements. Prog Electromagn Res Lett 24:129–138CrossRefGoogle Scholar
  11. 11.
    Tang M-C, Xiao S, Deng T, Wang D, Guan J, Wang B, Ge G-D (2011) Compact UWB antenna with multiple band-notches for WiMAX and WLAN. IEEE Trans Antennas Propag 59(4):1372–1396CrossRefGoogle Scholar
  12. 12.
    Sarkar D, Sarkar K, Saurav K (2014) A compact microstrip-fed triple band-notched UWB monopole antenna. IEEE Antennas Wirel Propag Lett 13:396–399CrossRefGoogle Scholar
  13. 13.
    Peng L, Xie JY, Jiang X, Li SM (2016) Investigation on ring splitring loaded bow-tie antenna for compactness and notched-band. Frequenz 70(3–4):89–99Google Scholar
  14. 14.
    Nikolaou S, Kingsley ND, Ponchak GE, Papapolymerou J, Tentzeris MM (2009) UWB elliptical monopoles with a reconfigurable band notch using MEMS switches actuated without bias lines. IEEE Trans Antennas Propag 57(8):2242–2251CrossRefGoogle Scholar
  15. 15.
    Antonino-Daviu E, Cabedo-Fabres M, Ferrando-Bataller M, Vila-Jimenez A (2007) Active UWB antenna with tunable band-notched behaviour. Electron Lett 43(18):959–960CrossRefGoogle Scholar
  16. 16.
    Peng L, Wen B-J, Li X-F, Jiang X, Li S-M (2017) CPW fed UWB antenna by EBGs with wide rectangular notched-band. IEEE Access 4:9545–9552CrossRefGoogle Scholar
  17. 17.
    Rahmat-Samii Y, Yang F (2009) Electromagnetic band gap structures in antenna engineering, 1st edn. Cambridge University Press, CambridgeGoogle Scholar
  18. 18.
    Baggen R, Martínez-Vázquez M, Leiss J, Holzwarth S, Drioli LS, de Maagt P (2008) Low profile GALILEO antenna using EBG technology. IEEE Trans Antennas Propag 56(3):667–674CrossRefGoogle Scholar
  19. 19.
    Mandal T, Das S (2014) Design of dual notch band UWB printed monopole antenna using electromagnetic-bandgap structure. Microw Opt Technol Lett 56(9):2195–2199CrossRefGoogle Scholar
  20. 20.
    Liu H, Xu Z (2013) Design of UWB monopole antenna with dual notched bands using one modified electromagnetic-bandgap structure. Sci World J Hindawi Publ Corp 2013:1–9Google Scholar
  21. 21.
    Jaglan N, Kanaujia BK, Gupta SD, Srivastava S (2017) Design and development of an efficient EBG structures based band notched UWB circular monopole antenna. Wirel Pers Commun 96(4):5757–5783CrossRefGoogle Scholar
  22. 22.
    Abdalla MA, Al-Mohamadi A, Mostafa A (2016) Dual notching of UWB antenna using double inversed U-shape compact EBG structure. In: Proceedings of IEEE international congress on advanced electromagnetic materials in microwaves and optics metamaterials, pp 17–22Google Scholar
  23. 23.
    Yang F, Rahmat-Samii Y (2003) Microstrip antennas integrated with electromagnetic band-gap (EBG) structures: a low mutual coupling design for array applications. IEEE Trans Antennas Propag 51(10):2936–2946CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  1. 1.Department of Electronics and TelecommunicationTerna Engineering CollegeNavi MumbaiIndia

Personalised recommendations