Advertisement

Evaluation of Macroscopic Soil Model Parameters Using the Discrete Element Method

  • Mandeep Singh BassonEmail author
  • Roberto Cudmani
  • G. V. Ramana
Conference paper
Part of the Lecture Notes in Civil Engineering book series (LNCE, volume 55)

Abstract

The engineering properties of the granular materials are controlled by the physical characteristics of the particles, the fabric, the granular matrix and the state of the material. For these discontinuous materials, numerical modeling using continuum-based methods are not able to capture the complex microscale interactions that control the macro scale behavior into detail. On the other hand, with appropriate contact algorithms, provision for complex grain shapes/gradations and modeling of mechanical behavior using real size discrete particles, the Discrete Element Method has been used by researchers to simulate the behavior of granular materials at the microscale. The objective of this study is to highlight the applicability of the DEM over a range of laboratory tests, including the determination of maximum and minimum void ratio, geometric compression tests, and drained triaxial compression tests. The comparison of experimental and numerical results demonstrates the ability of the DEM to realistically model macroscopic soil behavior based on only a few parameters in the micro scale. We conclude that back-calculation of the parameters in the microscale based on few conventional laboratory tests along with the application of the DEM to simulate complex stress- and strain-paths, that cannot be easily realized in experiments, can be a procedure for the development, validation and calibration of the advanced constitutive models required for solving real geotechnical boundary problems numerically.

Keywords

Discrete element method Granular materials Hypoplastic law Triaxial test Minimum void ratio Maximum void ratio 

References

  1. 1.
    Abbireddy COR, Clayton CRI (2010) Varying initial void ratios for DEM simulations. Géotechnique 60(6):497–502CrossRefGoogle Scholar
  2. 2.
    Bauer E (1996) Calibration of a comprehensive hypoplastic model for granular materials. Soils Found 36(1):13–26MathSciNetCrossRefGoogle Scholar
  3. 3.
    Belheine N, Plassiard JP, Donzé FV, Darve F, Seridi A (2009) Numerical simulation of drained triaxial test using 3D discrete element modelling. Comput Geotech 36(1–2):320–331CrossRefGoogle Scholar
  4. 4.
    Chang CS, Deng Y, Yang Z (2017) Modeling of minimum void ratio for granular soil with effect of particle size distribution. J Eng Mech 143(9):04017060CrossRefGoogle Scholar
  5. 5.
    Cundall PA, Strack ODL (1979) A discrete numerical model for granular assemblies. Géotechnique 29(1):47–65CrossRefGoogle Scholar
  6. 6.
    Dakoulas BP, Sun Y (1993) Fine ottawa sand: experimental behavior and theoretical predictions. J of Geotech Eng 118(12):1906–1923CrossRefGoogle Scholar
  7. 7.
    Herle I, Gudehus G (1999) Determination of parameters of a hypoplastic constitutive model from properties of grain assemblies. Mech Cohesive-Frict Mater 4(5):461–486CrossRefGoogle Scholar
  8. 8.
    Iwashita K, Oda M (1998) Rolling resistance at contacts in simulation of shear band development by DEM. J Eng Mech 124(3):285CrossRefGoogle Scholar
  9. 9.
    Kolymbas D, Wu W (1990) Recent results of triaxial tests with granular materials. Powder Technol 60(2):99–119CrossRefGoogle Scholar
  10. 10.
    Kozicki J, Tejchman J, Mühlhaus HB (2014) Discrete simulations of a triaxial compression test for sand by DEM. Int J Numer Anal Methods Geomech 38(18):1923–1952CrossRefGoogle Scholar
  11. 11.
    Lin J, Wu W (2013) Comparison of DEM simulation and hypoplastic model. In: Proceedings of American Society of Civil Engineers fifth biot conference on poromechanics, pp 1815–1819, Vienna, AustriaGoogle Scholar
  12. 12.
    Lu Y, Frost D (2010) Three-dimensional DEM modeling of triaxial compression of sands. In: Proceedings of American Society of Civil Engineers GeoShanghai international conference 2010, pp 220–226, Shanghai, China in Soil Behavior and Geo-MicromechanicsGoogle Scholar
  13. 13.
    Niemunis A, Herle I (1997) Hypoplastic model for cohesionless soils with elastic strain range. Mech Cohesive-Frict Mater 2(4):279–299CrossRefGoogle Scholar
  14. 14.
    O’Sullivan C (2011) Particle-based discrete element modeling: geomechanics perspective. Int J Geomech 11(6):449–464CrossRefGoogle Scholar
  15. 15.
    Reboul N, Vincens E, Cambou B (2008) A statistical analysis of void size distribution in a simulated narrowly graded packing of spheres. Granul Matter 10(6):457–468CrossRefGoogle Scholar
  16. 16.
    Salot, C, Gottel P, Villard P. (2009) Influence of relative density on granular materials behavior: DEM simulations of triaxial tests. Granul Matter 11(4):221–236CrossRefGoogle Scholar
  17. 17.
    Šmilauer V, Chareyre B (2015) DEM Formulation. Yade Documentation 2nd edGoogle Scholar
  18. 18.
    Widuliński Ł, Kozicki J, Tejchman J (2009) Numerical simulations of triaxial test with sand using DEM. Arch Hydro Eng Environ Mech 56(3):149–171Google Scholar
  19. 19.
    Wu W, Bauer E (1994) A simple hypoplastic constitutive model for sand. Int J Numer Anal Methods Geomech 18(12):833–862CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Mandeep Singh Basson
    • 1
    Email author
  • Roberto Cudmani
    • 2
  • G. V. Ramana
    • 3
  1. 1.University of California at DavisDavisUSA
  2. 2.Technical University of MunichMunichGermany
  3. 3.Indian Institute of Technology DelhiDelhiIndia

Personalised recommendations