Advertisement

Analysis of Inside Thermal Response Characteristic by Radiant Cooling System for Different-Level Energy-Efficient Building

  • Zhengrong Li
  • Dongkai ZhangEmail author
  • Shunyao Lu
  • Xiangyun Chen
Conference paper
  • 266 Downloads
Part of the Environmental Science and Engineering book series (ESE)

Abstract

Ultra-low energy building (UB) is being into real construction in China as the symbol of the higher energy-performance building standards. It is a great challenge to choose the appropriate terminal form of air conditioning that can achieve the indoor environment with low energy consumption and high comfort for UB in hot summer and cold winter areas of China. And the radiant cooling (RC) system could be considered because of the advantage of thermal comfortability and energy saving. The thermal response of the room with RC system has a great influence on thermal sensation of the occupant. This paper focuses on thermal response characteristic of UB and common energy-efficient building (CB) with RC system. A simplified steady-state heat transfer mathematical model for a typical office is presented in this study. According to the results, there is slight temperature fluctuation for wall surface and indoor air of UB but drastic for CB. Also, the thermal response characteristic of room with RC system for two buildings shows that indoor environment of UB is more sensitivity to RC system than that of CB. The research indicates that the UB presents more uniform and stable indoor thermal environment compared with CB with RC system, and this provides proposal for the optimal air conditioning of UB.

Keywords

Radiant cooling Ultra-low energy building Thermal response Hot summer and cold winter area 

Notes

Acknowledgements

This research was supported by the National Key R&D Program of China for the 13th Five-Year Plan (No. 2017YFC0702600).

References

  1. 1.
    Li, D., Liu, Y., Lama, J.: Zero energy buildings and sustainable development implications—a review. Energy 54, 1–10 (2013)CrossRefGoogle Scholar
  2. 2.
    Liu, Z., Liu, Y., He, B., et al.: Application and suitability analysis of the key technologies in nearly zero energy buildings in China. Renew. Sustain. Energy Rev. 101, 329–345 (2019)CrossRefGoogle Scholar
  3. 3.
    Kitagawa, K., Komoda, N., Hayano, H., et al.: Effect of humidity and small air movement on thermal comfort under a radiant cooling ceiling by subjective experiments. Energy Build. 30(2), 185–193 (1999)CrossRefGoogle Scholar
  4. 4.
    Lü, X., Lu, T., Viljanen, M.: A new analytical method to simulate heat transfer process in buildings. Appl. Therm. Eng. 26(16), 1901–1909 (2006)CrossRefGoogle Scholar
  5. 5.
    Sourbron, M., Herdt, R., Reet, T., et al.: Efficiently produced heat and cold is squandered by inappropriate control strategies: a case study. Energy Build. 41(10), 1091–1098 (2009)CrossRefGoogle Scholar
  6. 6.
    Fonseca, N., Cuevas, C., Lemort, V.: Radiant ceiling systems coupled to its environment part 1: experimental analysis. Appl. Therm. Eng. 30(14), 2187–2195 (2010)CrossRefGoogle Scholar
  7. 7.
    Corgnati, S., Perino, M., Fracastor, G., et al.: Experimental and numerical analysis of air and radiant cooling systems in offices. Build. Environ. 44(4), 801–806 (2009)CrossRefGoogle Scholar
  8. 8.
    NKhalifa, A.: Natural convective heat transfer coefficient—a review: I. Isolated vertical and horizontal surfaces. Energy Convers. Manag. 42(4), 491–504 (2001)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2020

Authors and Affiliations

  • Zhengrong Li
    • 1
  • Dongkai Zhang
    • 1
    Email author
  • Shunyao Lu
    • 1
  • Xiangyun Chen
    • 1
  1. 1.School of Mechanical EngineeringTongji UniversityShanghaiChina

Personalised recommendations