Advertisement

Heterogeneous Integration of CIS, LED, MEMS, and VCSEL

  • John H. LauEmail author
Chapter

Abstract

In this chapter, the heterogeneous integration of CIS (CMOS image sensor), heterogeneous integration of LED (light-emitting diode), heterogeneous integration of MEMS (microelectromechanical systems), and heterogeneous integration of VCSEL (vertical cavity surface emitted laser) and PD (photodiode) detector will be presented. Emphasis is placed on providing some examples of each of these heterogeneous integrations.

References

  1. 1.
    Iwabuchi, S., Y. Maruyama, Y. Ohgishi, M. Muramatsu, N. Karasawa, and T. Hirayama, “A Back-Illuminated High-Sensitivity Small-Pixel Color CMOS Image Sensor with Flexible Layout of Metal Wiring”, Proceedings of IEEE/ISSCC, San Francisco, CA, February 2006, pp. 16.8.1–16.8.8.Google Scholar
  2. 2.
    Wakabayashi, H., K. Yamaguchi, M. Okano, S. Kuramochi, O. Kumagai, S. Sakane, M. Ito, et al., “A 1/2.3-inch 10.3 Mpixel 50 frame/s Back-Illuminated CMOS Image Sensor”, Proceedings of IEEE/ISSCC, San Francisco, CA, February 2010, pp. 411–412.Google Scholar
  3. 3.
    Sukegawa, S., T. Umebayashi, T. Nakajima, H. Kawanobe, K. Koseki, I. Hirota, T. Haruta, et al., “A 1/4-inch 8 Mpixel Back-Illuminated Stacked CMOS Image Sensor”, Proceedings of IEEE/ISSCC, San Francisco, CA, February 2013, pp. 484–486.Google Scholar
  4. 4.
    Kagawa, Y., N. Fujii, K. Aoyagi, Y. Kobayashi, S. Nishi, N. Todaka, et al., “Novel Stacked CMOS Image Sensor with Advanced Cu2Cu Hybrid Bonding”, Proceedings of IEEE/IEDM, December 2016, pp. 8.4.1–8.4.4.Google Scholar
  5. 5.
    Coudrain, P., D. Henry, A. Berthelot, J. Charbonnier, S. Verrun, R. Franiatte, N. Bouzaida, et al., “3D Integration of CMOS Image Sensor with Coprocessor Using TSV Last and Micro-Bumps Technologies”, Proceedings of IEEE/ECTC, Las Vegas, NV, May 2013, pp. 674–682.Google Scholar
  6. 6.
    Rhodes, H., D. Tai, Y. Qian, D. Mao, V. Venezia, W. Zheng, Z. Xiong, et al., “The Mass Production of BSI CMOS Image Sensors”, Proceedings of International Image Sensor Workshop, 2009, pp. 27–32.Google Scholar
  7. 7.
    Tetsuo Nomoto1, Swain, P. K., and D. Cheskis, “Back-Illuminated Image Sensors come to the Forefront,” Photonics Spectra, http://www.photonics.com/Article.aspx?AID=34685.
  8. 8.
    Lau, J. H., R. Lee, M. Yuen, and P. Chan, “3D LED and IC Wafer Level Packaging”, Journal of Microelectronics International, Vol. 27, No. 2, 2010, pp. 98–105.Google Scholar
  9. 9.
    Zhang, R., R. Lee, D. Xiao, and H. Chen, “LED Packaging using Silicon Substrate with Cavities for Phosphor Printing and Copper-filled TSVs for 3D Interconnection”, Proceeding of IEEE/ECTC, May 2011, pp. 1616–1621.Google Scholar
  10. 10.
    Zhang, R., and R. Lee, “Moldless Encapsulation for LED Wafer Level Packaging using Integrated DRIE Trenches”, Journal of Microelectronics Reliability, Vol. 52, 2012, pp. 922–932.Google Scholar
  11. 11.
    Chen, D., L. Zhang, Y. Xie, K. Tan, and C. Lai, “A Study of Novel Wafer Level LED Package Based on TSV Technology”, IEEE Proceedings of ICEPT, August 2012, pp. 52–55.Google Scholar
  12. 12.
    Xie, Y., D. Chen, L. Zhand, K. Tan, and C. Lai, “A Novel Wafer Level Packaging for White Light LED”, IEEE Proceedings of ICEPT, August 2013, pp. 1170–1174.Google Scholar
  13. 13.
    Lau, J. H., “Design and Process of 3D MEMS Packaging”, IMAPS Transactions, Journal of Microelectronics and Electronic Packaging, First Quarter Issue, Vol. 7, 2010, pp. 10–15.Google Scholar
  14. 14.
    Lau, J. H., C. K. Lee, C. S. Premachandran, and Yu Aibin, Advanced MEMS Packaging, McGraw-Hill, New York, NY, 2010.Google Scholar
  15. 15.
    Sekhar, V., J. Toh, J. Cheng, J. Sharma, S. Fernando, and B. Chen, “Wafer Level Packaging of RF MEMS Devices Using TSV Interposer Technology”, Proceedings of IEEE/EPTC, Singapore, December 2012, pp. 239–243.Google Scholar
  16. 16.
    Chen, B., V. Sekhar, C. Jin, Y. Lim, J. Toh, S. Fernando, and J. Sharma, “Low-Loss Broadband Package Platform With Surface Passivation and TSV for Wafer-Level Packaging of RF-MEMS Devices”, IEEE Transactions on CPMT, Vol. 3, No. 9, September 2013, pp. 1443–1452.Google Scholar
  17. 17.
    Pang, W., R. Ruby, R. Parker, P. W. Fisher, M. A. Unkrich, and J. D. Larson, III, “A Temperature-Stable Film Bulk Acoustic Wave Oscillator”, IEEE Electron Device Letters, Vol. 29, No. 4, April 2008, pp. 315–318.Google Scholar
  18. 18.
    Small, M., R. Ruby, S. Ortiz, R. Parker, F. Zhang, J. Shi, and B. Otis, “Wafer-Scale Packaging For FBAR Based Oscillators”, Proceedings of IEEE International Joint Conference of FCS, 2011, pp. 1–4.Google Scholar
  19. 19.
    Premachandran, C. S., J. H. Lau, X. Ling, A. Khairyanto, K. Chen, and M. Pa, “A Novel, Wafer-level Stacking Method for Low-chip Yield and Non-uniform, Chip-size Wafers for MEMS and 3D SiP Applications”, Proceedings of IEEE/ECTC, May 2008, pp. 314–318.Google Scholar
  20. 20.
    Chen, K., C. Premachandran, K. Choi, C. Ong, X. Ling, A. Ratmin, J. H. Lau, et al., “C2W Low Temperature Bonding Method for MEMS Applications”, Proceedings of IEEE/EPTC, December 2008, pp. 1–7.Google Scholar
  21. 21.
    Lee, C., A. Yu, L. Yan, H. Wang, J. Han, Q. Zhang, and J. H. Lau, “Characterization of Intermediate In/Ag Layers of Low Temperature Fluxless Solder based Wafer Bonding for MEMS Packaging”, Journal of Sensors Actuators A: Physical, Vol. 154, 2009, pp. 85–91.Google Scholar
  22. 22.
    Lau, J. H., Y. Lim, T. Lim, G. Tang, K. Houe, X. Zhang, P. Ramana, et al., “Design and Analysis of 3D Stacked Optoelectronics on Optical Printed Circuit Boards”, Proceedings of SPIE, Photonics Packaging, Integration, and Interconnects VIII, Vol. 6899, San Jose, CA, January 19–24, 2008, pp. 07.1–07.20.Google Scholar
  23. 23.
    Ramana, P., H. Kuruveettil, B. Lee, K. Suzuki, T. Shioda, C. Tan, J. H. Lau, et al., “Bi-directional Optical Communication at 10 Gb/s on FR4 PCB using Reflow Solderable SMT Transceiver”, IEEE/ECTC Proceedings, May 2008, pp. 244–249.Google Scholar
  24. 24.
    Lim, T. G., B. Lee, T. Shioda, H. Kuruveettil, J. Li, K. Suzuki, J. H. Lau, et al., “Demonstration of high frequency data link on FR4 PCB using optical waveguides”, IEEE Transactions of Advanced Packaging, Vol. 32, May 2009, pp. 509–516.Google Scholar
  25. 25.
    Lim, L, C. Teo, H. Yee, C. Tan, O. Chai, Y. Jie, J. H. Lau, et al., “Optimization and Characterization of Flexible Polymeric Optical Waveguide Fabrication Process for Fully Embedded Board-level Optical Interconnects”, IEEE/EPTC Proceedings, December 2008, pp. 1114–1120.Google Scholar
  26. 26.
    Chai, J., G. Yap, T. Lim, C. Tan, Y. Khoo, C. Teo, J. H. Lau, et al., “Electrical Interconnect Design Optimization for Fully Embedded Board-level Optical Interconnects”, IEEE/EPTC Proceedings, December 2008, pp. 1126–1130.Google Scholar
  27. 27.
    Teo, C., W. Liang, H. Yee, L. Lim, C. Tan, J. Chai, J. H. Lau, et al., “Fabrication and Optimization of the 45° Micro-mirrors for 3-D Optical Interconnections”, IEEE/EPTC Proceedings, December 2008, pp. 1121–1125.Google Scholar
  28. 28.
    Chang, C., J. Chang, J. H. Lau, A. Chang, T. Tang, S. Chiang, M. Lee, et al., “Fabrication of Fully Embedded Board-level Optical Interconnects and Optoelectronic Printed Circuit Boards”, IEEE/EPTC Proceedings, December 2009, pp. 973–976.Google Scholar
  29. 29.
    Lau, J. H., M. S. Zhang, and S. W. R. Lee, “Embedded 3D Hybrid IC Integration System-in-Package (SiP) for Opto-Electronic Interconnects in Organic Substrates”, ASME Paper IMECE2010-40974.Google Scholar
  30. 30.
    Lau, J. H., M. S. Zhang, and S. W. R. Lee, “Embedded 3D Hybrid IC Integration System-in-Package (SiP) for Opto-Electronic Interconnects in Organic Substrates,” ASME Transactions, Journal of Electronic Packaging, Vol. 133, September 2011, pp. 1–7.Google Scholar
  31. 31.
    Lau, J. H., S. W. Lee, M. Yuen, J. Wu, C. Lo, H. Fan, and H. Chen, “Apparatus Having an Embedded 3D Hybrid Integration for Optoelectronic Interconnects in Organic Substrate”. US Patent No: 9,057,853, Date of Patent: June 16, 2015.Google Scholar
  32. 32.
    Matsubara, T., K. Oda, K. Watanabe, K. Tanaka, M. Maetani, Y. Nishimura, S. Tanahashi, “Three Dimensional Optical Interconnect on Organic Circuit Board”, IEEE Electronic Components and Technology Conference, May 2006, pp. 789–794.Google Scholar
  33. 33.
    Immonen, M., M. Karppinen, J. Kivilahti, “Fabrication and Characterization of Polymer Optical Waveguuides with Integrated Micromirrors for 3-D Board Level Optical Interconnects”, IEEE Transactions on Electronics Packaging Manufacturing, Vol. 28, No. 4, 2005, pp. 304–311.Google Scholar
  34. 34.
    Choi, C., L. Lin, Y. Liu, J. Choi, L. Wang, D. Hass, J. Magera, et al., “Flexible Optical Waveguide Film Fabrications and Optoelectronic Devices Integration for Fully Embedded Board-Level Optical Interconnects”, IEEE Journal of Lightwave Technology, Vol. 22, No. 9, 2004, pp. 2168–2176.Google Scholar
  35. 35.
    Wang, L., X. L. Wang, J. Choi, D. Haas, J. Magera, and R. T. Chen, “Low-loss Thermally Stable Waveguide with 45° Micromirrors Fabricated by Soft Molding for Fully Embedded Board-level Optical Interconnects”, Proceedings of SPIE, Vol. 5731, 2005, pp. 87–93.Google Scholar
  36. 36.
    Xia, Y., and G. M. Whitesides, “Soft-lithography”, Annual Review Of Materials Science, Vol. 28, 1998, pp. 84–153.Google Scholar
  37. 37.
    Park, J., E.-D. Sim, and Y.-S. Beak, “Improvement of Fabrication Yield and Loss Uniformity of Waveguide Mirror”, IEEE Photonics Technology Letters, Vol. 17, No. 4, April 2005, pp. 807–809.Google Scholar
  38. 38.
    Kim, J. T., B. C. Kim, M. Jeong, and M. Lee, “Fabrication of a Micro-Optical Coupling Structure by using Laser Ablation”, Journal of Materials Processing Technology, Vol. 146, 2004, pp. 163–166.Google Scholar
  39. 39.
    Garner, S., S.-S. Lee, V. Chuyanov, A. Chen, A. Yacoubian, W. Steier, and L. Dalton, “Three-Dimensional Integrated Optics using Polymers”, IEEE Journals Of Quantum Electronics, Vol. 35, No. 8, August 1999, pp. 1146–1155.Google Scholar
  40. 40.
    Kim, J.-S., and J.-J. Kim, “Stacked Polymeric Multimode Waveguide Arrays for Two-Dimensional Optical Interconnects,” IEEE Journal of Lightwave Technology, Vol. 22, No. 3, March 2004, pp. 840–844.Google Scholar
  41. 41.
    Kim, J.-S., and J.-J. Kim, “Fabrication of Multimode Polymeric Waveguides and Micromirrors using Deep X-ray Lithography”, IEEE Photonics Technology Letters, Vol. 16, No. 3, March 2004, pp. 798–800.Google Scholar
  42. 42.
    Kim, J.-H., and R. T. Chen, “A Collimation Mirror in Polymeric Planar Waveguide Formed by Reactive Ion Etching”, IEEE Photonics Technology Letters, Vol. 15, No. 3, March 2003, pp. 422–424.Google Scholar
  43. 43.
    Lehmacher, S., and A. Neyer, “Integration of Polymer Optical Waveguides into Printed Circuit Boards”, Electronics Letters, Vol. 36, No. 12, June 2000, pp. 1052–1053.Google Scholar
  44. 44.
    Chandrappan, J., H. Kuruveettil, T. Wei, C. Liang, P. Ramana, K. Suzuki, T. Shioda, et al., “Performance Characterization Methods for Optoelectronic Circuit Boards”, IEEE Transactions on CPMT, Vol. 1, No. 3, March 3, 2011, pp. 318–326.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.ASM Pacific TechnologyHong KongHong Kong

Personalised recommendations