Advertisement

Optimization of Lead Ions Adsorption onto C16-6-16 Incorporated Mesoporous MCM-41 Using Box-Behnken Design

  • Suman Saini
  • Jyoti Chawla
  • Rajeev Kumar
  • Inderpreet Kaur
Chapter

Abstract

Adsorption of lead ions by mesoporous material incorporating Gemini surfactant C16-6-16 (G-MCM-41) was investigated using response surface methodology. The effect of pH, initial metal concentration and contact time was studied using Box-Behnken design (BBD). The optimal parameters for maximum adsorption capacity (81.92 mg/g) were obtained at pH 5.85, initial lead ion concentration 99.02 mg/L, and contact time 118.49 min. The effect of different variables and their interactions were assessed by analysis of variance (ANOVA). The surface and contour response plot shows the interaction of different variables and response. The experimental data fits best in the quadratic model with maximum predicted R2 value of 0.9013 and Prob > F is <0.0001 showing the model is significant.

Keywords

Lead MCM-41 Response surface methodology Box-Behnken design 

Notes

Acknowledgements

The authors are thankful to Manav Rachna International Institute of Research and Studies Faridabad, India for providing support.

References

  1. 1.
    Chawla J, Kumar R, Kaur I (2015) Carbon nanotubes and graphenes as adsorbents for adsorption of lead ions from water: a review. J Water Supply Res Technol AQUA 64(6):641–659CrossRefGoogle Scholar
  2. 2.
    Garba ZN, Bello I, Galadima A et al (2016) Optimization of adsorption conditions using central composite design for the removal of copper (II) and lead (II) by defatted papaya seed. Karbala Int J Mod Sci 2:20–28CrossRefGoogle Scholar
  3. 3.
    Yavuz O, Guzel R, Aydin F et al (2007) Removal of cadmium and lead from aqueous solution bycalcite. Pol J Environ Stud 16(3):467–471Google Scholar
  4. 4.
    Srivastava SK, Gupta VK, Mohan D (1999) Removal of lead and chromium by activate slab– A blast furnance waste. J Environ Eng 123:461–468CrossRefGoogle Scholar
  5. 5.
  6. 6.
  7. 7.
    Sounthararajah DP, Loganathan P, Kandasamy J et al (2015) Adsorptive removal of heavy metals from water using sodium titanate nanofibres loaded onto GAC in fixed-bed columns. J Hazard Mater 287:306–316PubMedCrossRefGoogle Scholar
  8. 8.
    Kumar R, Chawla J, Kaur I (2015) Removal of cadmium ion from wastewater by carbon-based nanosorbents: a review. J Water Health 13(1):18–33PubMedCrossRefGoogle Scholar
  9. 9.
    Varshini CJS, Das D, Das N (2015) Optimization of parameters for praseodymium(III) biosorption onto biowaste materials using response surface methodology: equilibrium, kinetic and regeneration studies. Ecol Eng 81:321–327CrossRefGoogle Scholar
  10. 10.
    Mondal NK, Samanta A, Dutta S, et al (2017) Optimization of Cr(VI) biosorption onto aspergillus niger using 3-level Box-Behnken design: equilibrium, kinetic, thermodynamic and regeneration studies. J Genet Eng Biotechnol 15(1):151–160.  https://doi.org/10.1016/j.jgeb.2017.01.006 PubMedCrossRefGoogle Scholar
  11. 11.
    Ahmadi A, Heidarzadeh H, Mokhtari AR et al (2014) Optimization of heavy metal removal from aqueous solutions by maghemite (γ-Fe2O3) nanoparticles using response surface methodology. J Geochem Explor 147:151–158CrossRefGoogle Scholar
  12. 12.
    Saini S, Chawla J, Kumar R et al (2015) C16-6-16 Incorporated Mesoporous MCM-41: synthesis, characterization and application as adsorbent for removal of cadmium ions from aqueous solution. ISST J Appl Chem 6(1):1–5Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Suman Saini
    • 1
  • Jyoti Chawla
    • 1
  • Rajeev Kumar
    • 1
  • Inderpreet Kaur
    • 1
    • 2
  1. 1.Manav Rachna International Institute of Research and StudiesFaridabadIndia
  2. 2.Guru Nanak Dev UniversityAmritsarIndia

Personalised recommendations