Advertisement

Effect on Mechanical Properties of Aluminum Composites by Inclusion of Silicon Carbide

  • V. Senthil KannanEmail author
  • K. Lenin
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In this paper, the mechanical properties of new composite material aluminum with silicon carbide were analyzed. The composite with various proportions of silicon carbide (2, 4 and 6%) with aluminum 2017 was prepared by stir casting process. For the analysis of mechanical properties for aluminum composite included by silicon carbide, the hardness test, impact tests and tensile tests were conducted. The results showed that the inclusion of silicon carbide particles increased the hardness and impact strength of the composites. It was also found that only small amount of increment was found in all results. From this, it was clearly known that if the increase in % of silicon carbide inclusion increases mechanical properties of aluminum composite for a certain level.

Keywords

Reinforcement Stir casting 

References

  1. 1.
    Rana RS, Purohit R, Soni VK, Das S (2015) Characterization of mechanical properties and microstructure of aluminum alloy-SiC composites. Mater Today 2:1149–1156Google Scholar
  2. 2.
    Harichandran R, Selvakumar N (2016) Effect of nano/micro B4C particles on the mechanical properties of aluminum metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process. Arch Civ Mech Eng 16:147–158CrossRefGoogle Scholar
  3. 3.
    Suresha S, Sridhara BK (2010) Wear characteristics of hybrid aluminum matrix composites reinforced with graphite and silicon carbide particulates. Compos Sci Technol 70:1652–1659CrossRefGoogle Scholar
  4. 4.
    Mahendra KV, RadhaKrishna K (2010) Characterization of stir cast Al Cu (fly ash + SiC) hybrid metal matrix composites. J Compos Mater 44(8):989–1005CrossRefGoogle Scholar
  5. 5.
    Balakumar S, Selvam MD, Nelson AJR (2018) Wear and friction characteristics of aluminium matrix composites reinforced with flyash/Cu/Gr particles. Int J ChemTech Res 11(01):121–133Google Scholar
  6. 6.
    Singh J, Chauhan A (2016) Characterization of hybrid aluminum matrix composites for advanced applications—a review. J Mater Res Technol 5(2):159–169CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringPaavai Engineering CollegeNamakkalIndia
  2. 2.Department of Mechanical EngineeringK.Ramakrishnan College of EngineeringTiruchirappalliIndia

Personalised recommendations