Advertisement

Study on Control of Hybrid Photovoltaic-Wind Power System Using Xilinx System Generator

  • Nadjwa Chettibi
  • Adel MellitEmail author
Chapter
Part of the Power Systems book series (POWSYS)

Abstract

In this chapter, a grid connected hybrid power system consisting of a Photovoltaic (PV) source and a Wind Turbine (WT) generator is investigated. The main goal is the study of the design procedure of a digital control circuit of an energy generation system for future implementation on the Field-Programmable Gate Array (FPGA) platform. Hence, well-known Maximum Power Point Tracking (MPPT) techniques are adopted in order to extract the maximum energy from the renewable energy sources. Further, for the control of Permanent Magnetic Synchronous Generator (PMSG), the Field Oriented Control (FOC) structure is applied. The Virtual Flux Oriented Control (VFOC) scheme is adopted for the control of the grid connected three-phase inverter based on the backstepping approach. The overall control scheme of the PV-WT power system is established using the Xilinx System Generator (XSG) design tool. The simulation results are provided in order to prove the effectiveness of the developed XSG based control circuit.

References

  1. 1.
    Abu-Rub H, Malinowski M, Al-Haddad K (2014) Power electronics for renewable energy systems, transportation and industrial applications. Wiley, IEEE, New YorkGoogle Scholar
  2. 2.
    Kumar D, Chatterjee K (2016) A review of conventional and advanced MPPT algorithms for wind energy systems. Renew Sustain Energy Rev 55:957–970CrossRefGoogle Scholar
  3. 3.
    Coelho RF, Concer FM, Martins DC (2010) A MPPT approach based on temperature measurements applied in PV systems. In: 2010 9th IEEE/IAS international conference on industry applications (INDUSCON), pp 1–6Google Scholar
  4. 4.
    Blaabjerg F, Teodorescu R, Liserre M, Timbus AV (2006) Overview of control and grid synchronization for distributed power generation systems. IEEE Trans Ind Electron 53:1398–1409CrossRefGoogle Scholar
  5. 5.
    Malinowski M, Jasinski M, Kazmierkowski MP (2004) Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM). IEEE Trans Ind Electron 51:447–454CrossRefGoogle Scholar
  6. 6.
    Parvez M, Elias MFM, Rahim NA, Osman N (2016) Current control techniques for three-phase grid interconnection of renewable power generation systems: a review. Sol Energy 135:29–42CrossRefGoogle Scholar
  7. 7.
    Kim Il-Song (2007) Robust maximum power point tracker using sliding mode controller for the three-phase grid-connected photovoltaic system. Sol Energy 81:405–414CrossRefGoogle Scholar
  8. 8.
    Naouar MW Ben, Hania B, Slama-Belkhodja I, Monmasson E, Naassani AA (2013) FPGA-based sliding mode direct control of single phase PWM boost rectifier. Math Comput Simul 91:249–261MathSciNetCrossRefGoogle Scholar
  9. 9.
    Wang GD, Wai RJ, Liao Y (2013) Design of backstepping power control for grid-side converter of voltage source converter-based high-voltage dc wind power generation system. IET Renew Power Gener 7:118–133CrossRefGoogle Scholar
  10. 10.
    Aouadi C, Abouloifa A (2014) Backstepping based control of PV system connected to the grid. Int J Comput Inf Technol 3Google Scholar
  11. 11.
    Naoufel K, Zazi M, Mahmoudi H (2015) Grid-connected photovoltaic system using an advanced backstepping approach. Theor Appl Inf Technol 79:330–337Google Scholar
  12. 12.
    Zhou J, Wen C (2008) Adaptive backstepping control of uncertain systems: nonsmooth nonlinearities, interactions or time-variations. Springer, Berlin (2008)Google Scholar
  13. 13.
    Chen CX, Xie YX, Lan YH (2015) Backstepping control of speed sensorless permanent magnet synchronous motor based on slide model observer. Autom Comput 12:149–155CrossRefGoogle Scholar
  14. 14.
    Bossoufi B, Karim M, Lagrioui A, Taoussi M, Derouich A (2015) Observer backstepping control of DFIG-Generators for wind turbines variable-speed: FPGA-based implementation. Renew Energy 81:903–917CrossRefGoogle Scholar
  15. 15.
    Selvamuthukumaran R, Gupta R (2014) Rapid prototyping of power electronics converters for photovoltaic system application using Xilinx System Generator. IET Power Electron 7:2269–2278CrossRefGoogle Scholar
  16. 16.
    Krim S, Gdaim S, Mtibaa A, Mimouni MF (2015) Design and implementation of direct torque control based on an intelligent technique of induction motor on FPGA. Electr Eng Technol 10:1527–1539CrossRefGoogle Scholar
  17. 17.
    Murugesan K, Muthu R, Vijayenthiran S, Mervin JB (2015) Prototype hardware realization of the DSTATCOM for reactive power compensation. Electr Power Energy Syst 65:169–178CrossRefGoogle Scholar
  18. 18.
    Walker G (2001) Evaluating MPPT converter topologies using a Matlab PV model. Electr Electron Eng 21Google Scholar
  19. 19.
    Aubree R, Auger F, Mace M, Loron L (2016) Design of an efficient small wind-energy conversion system with an adaptive sensorless MPPT strategy. Renew Energy 86:280–291CrossRefGoogle Scholar
  20. 20.
    Teodorescu R, Liserre M, Rodriguez P (2011) Grid converters for photovoltaic and wind power systems. Wiley, IEEE, New York (2011)CrossRefGoogle Scholar
  21. 21.
    Malinowski M, Kazmierkowski MP, Trzynadlowski AM (2003) A comparative study of control techniques for PWM rectifiers in AC adjustable speed drives. IEEE Trans Power Electr 18:1390–1396CrossRefGoogle Scholar
  22. 22.
    Chettibi N, Mellit A, Sulligoi G Massi, Pavan A (2018) Adaptive neural network-based control of a hybrid AC/DC microgrid. IEEE Trans Smart Grid 9:1667–1679Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Renewable Energy LaboratoryUniversity of JijelJijelAlgeria
  2. 2.ICTPTriesteItaly

Personalised recommendations