Advertisement

Oil- and Aluminum-Based Thermal Storage System Using Flat Plate Solar Collector

  • Vednath P. KalbandeEmail author
  • Pramod V. Walke
Conference paper
Part of the Lecture Notes on Multidisciplinary Industrial Engineering book series (LNMUINEN)

Abstract

The energy demand in the world is increasing day by day, and fossil fuel shortages are also increasing. Solar energy and renewable energy resources become more important. Most of the Indian population is lives in rural area and use wood for the cooking purpose. The thermal energy storage is popular in this era for the cooking purpose. Thermal energy storage system based on solar collector is developed for the cooking of bread in mind. The oil- and aluminum-based energy storage system is used for experimentation and having same storage potential and to store the energy in storage contain phase change material which have melting temperature of 210–220 °C. Energy collected by solar collector heated the fluid (i.e., soybean oil) contained in receiver tube and carry the energy to storage space. The self-circulation unit is introducing between storage and solar collector which contain soybean oil as a heat transfer fluid. Main aim of the concept is to store energy during day and utilized it in nighttime for cooking purpose.

Keywords

Aluminum-based storage Oil-based storage Phase change material Self-circulation Solar collector Thermal storage 

References

  1. 1.
    Buddhi, D., Sahoo, L.K.: Solar cooker with latent heat storage: design and experimental testing. Energy Convers. Manag. 38(5), 493–498 (1997)CrossRefGoogle Scholar
  2. 2.
    Nahar, N.M.: Performance and testing of a hot box storage solar cooker. Energy Covers. Manage. 44(8), 1323–1331 (2003)CrossRefGoogle Scholar
  3. 3.
    Nyeinga, K: Dynamic model for small scale concentrating solar energy system with heat storage. In: Physics Department. Makerere University, Kampala, Uganda (2012)Google Scholar
  4. 4.
    Van den Heetkamp, R.: The development of small solar concentrating systems with heat storage for rural food preparation. Phys. Scr. 2002, 99 (2002)Google Scholar
  5. 5.
    Loveseth, J.: Small multi-purpose concentrating solar energy systems. In: Proceeding of the 10 Solar PACES International Symposium (2000)Google Scholar
  6. 6.
    Okello, D: Rock bed stove suitable for solar cookers with thermal energy storage systems (Potential for solar cooking in Uganda). In: Physics. Makerere University, Makerere, Uganda (2012)Google Scholar
  7. 7.
    Foong, C.W.: Experimental and numerical investigations of small scale double-reflector concentrating solar system with latent heat storage. Department of Energy and Process Engineering. NTNU. Norwegian University of Science and Technology (2011)Google Scholar
  8. 8.
    Joshi, S.V., Bokil, R.S., Nayak, J.K.: Test standards for thermosyphon-type solar domestic hot water system: review and experimental situation. Sol. Energy 78, 761–798 (2005)CrossRefGoogle Scholar
  9. 9.
    Romeo, E., Royo, C., Monzon, A.: Improved explicit equations for estimation of the friction factor in rough and smooth pipes. Phys. D 239, 1318–1328 (2010)CrossRefGoogle Scholar
  10. 10.
    Hoff, C.: Heat Storage for solar based concentrator. Master thesis. Department of Energy and Process Engineering, Norwegian University of Science and Technology (2012)Google Scholar
  11. 11.
    Mussard, M., Nydal, O.J.: Comparison of oil and aluminum-based heat storage charged with a small scale solar parabolic trough. Appl. Therm. Eng. 58(1–2), 146–154 (2013)CrossRefGoogle Scholar
  12. 12.
    Mussard, M., Nydal, O.J.: Charging of a heat storage coupled with a low cost small scale solar parabolic trough for cooking purposes. Sol. Energy 95, 144–154 (2013)CrossRefGoogle Scholar
  13. 13.
    Mussard, M., Gueno, A., Nydal, O.J.: Experimental study of solar cooking using heat storage in comparison with direct heating. Sol. Energy 98(Part C), 375–383 (2013)CrossRefGoogle Scholar
  14. 14.
    Kalbande, V.P., Rambhad, K.S., Walke, P.V.: Performance of solar collector for thermal storage system using nanofluid: a review. IJAEFEA 2(1), 6–11 (2015)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Department of Mechanical EngineeringG. H. Raisoni College of EngineeringNagpurIndia

Personalised recommendations