Advertisement

The Development of a New Reinforced Thermoplastic Pipe with Large Diameter for Oil and Gas Transmission Pipeline

  • Peng Song
  • Dengzun YaoEmail author
  • Bin Chen
  • Chao Wang
Conference paper
Part of the Springer Proceedings in Physics book series (SPPHY, volume 216)

Abstract

Reinforced thermoplastic pipe (RTP) is widely used in petroleum, chemical engineering, and water supply, etc. As RTP is designed to be spoilable, they are not normally larger than 6 in. diameter. However, because of advantage in corrosion resistance, big diameter RTP with high pressure has become the new focus on the field of oil and gas pipeline in the worldwide. In this paper, a new reinforced thermoplastic pipe with a large diameter up to 18 in. for oil and gas transmission pipeline has been successfully developed, with the burst pressure up to 24.34 MPa. The results showed that the failure of glass fiber-reinforced tape was the main fracture mode of this type of RTP under inner pressure. FEA is reliable for RTP design.

References

  1. 1.
    F.A. Saleh, I. Ward, Review of flexible composite piping systems, Pipeline Research Council International, Inc., PRCI-473-144506 (2015)Google Scholar
  2. 2.
    I. Ward, F.A. Saleh, State of the art alternatives to steel pipelines, Pipeline Research Council International report PR-473-144506-R01 (2016)Google Scholar
  3. 3.
    Y. Bai, F. Xu, P. Cheng et al., Burst capacity of reinforced thermoplastic pipe under internal pressure. In Proceedings of the ASME 2011 30th International Conference on Ocean, vol. 4 (2011), pp. 281–288Google Scholar
  4. 4.
    Y. Bai, B. Yu, P. Chen et al., Bending behavior of reinforced thermoplastic pipe. J. Offshore Mech. Arctic Eng. 137(2), 1–11 (2015)CrossRefGoogle Scholar
  5. 5.
    Y. Bai, N. Wang, P. Cheng et al., Collapse of reinforced thermoplastic pipe (RTP) under external pressure, in Proceedings of the ASME 2011 30th International Conference on Ocean (2011)Google Scholar
  6. 6.
    X. Li, J. Zheng, S. Feng, Q. Quan et al., Long-term stress analysis of plastic pipe reinforced by cross-winding steel wire. Press. Vessel Technol. 132(4), 477–491 (2010)Google Scholar
  7. 7.
    J. Azaiez, K. Chiba, F. Chinesta, A. Poitou, State-of-the-art on numerical simulation of fiber-reinforced thermoplastic forming processes. Arch. Comput. Methods Eng. 9(2), 141–198 (2002)CrossRefGoogle Scholar
  8. 8.
    M. Xia, H. Takayanagi, K. Kemmochi, Analysis of multi-layered filament wound composite pipes under internal pressure. Compos. Struct. 53(4), 483–491 (2001)CrossRefGoogle Scholar
  9. 9.
    A. Onder, O. Sayman, T. Dogan, N. Tarakcioglu, Burst failure load of composite pressure vessels. Compos. Struct. 89(1), 159–166 (2009)CrossRefGoogle Scholar
  10. 10.
    M.P. Kruijer, L.L. Warnet, R. Akkerman, Analysis of the mechanical properties of a reinforced thermoplastic pipe (RTP). Compos. A Appl. Sci. Manuf. 36(2), 291–300 (2005)CrossRefGoogle Scholar
  11. 11.
    American Petroleum Institute, Spoolable reinforced plastic line pipe, API15S (2016)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Pipeline Research Institute of CNPCLangfangChina
  2. 2.The 2nd Pipeline Construction Limited Company of China National Petroleum CorporationXuzhouChina
  3. 3.PetroChina West East Gas Pipeline CompanyPudongChina

Personalised recommendations