Advertisement

Weld Bead Penetration State Recognition in GTAW Process Based on a Human Auditory Perception Model

  • Yanfeng GaoEmail author
  • Qisheng Wang
  • Yanfeng Gong
  • Linran Huang
Conference paper
Part of the Transactions on Intelligent Welding Manufacturing book series (TRINWM)

Abstract

The state of weld bead penetration is a crucial factor that affects the service performance of the welding products. Since arc sound signals contain abundant information of welding process, they were usually adopted to monitor the penetration states of weld bead online. However, the arc sound signals are susceptible to the environment noise, so they are seldom applied in industrial practice. In this study, a human auditory perception model was proposed to identify the penetration states in GTAW process. In this model, an auricle and middle ear transformation function were adopted firstly to remove partial noise in the arc sound signals. Then through simulating the functions of human ear basement membrane, a gamma-tone frequency resolution algorithm was used to decompose the arc sound signals into 64 channels. At last, based on the short-time energies of arc sound in these channels, the feature vectors were built to identify the penetration states. The experimental results show that the proposed method has high accuracy in recognition rates and strong anti-noise interference capabilities. The human auditory perception model proposed in this study has potential practical applications in industrial environment.

Keywords

Weld penetration Auditory mode State recognition Arc sound 

Notes

Acknowledgements

The authors gratefully acknowledge the support from the National Natural Science Foundation of China (51465043).

References

  1. 1.
    Kaskinen P, Mueller G (1986) Acoustic arc length control. In: Proceedings of an international conference on trends in welding research, pp 763–765Google Scholar
  2. 2.
    Drouet MG, Nadeau F (1982) Acoustic measurement of the arc voltage applicable to arc welding and arc furnaces. J Phys E Sci Instrum 15(3):268CrossRefGoogle Scholar
  3. 3.
    Ma Y, Chen J, Liang W (2005) Parametric modeling of the arc sound in GMAW for on-line quality monitoring. J Mech Eng 41(11):109–114CrossRefGoogle Scholar
  4. 4.
    Fan D, Shi Y, Ushio M (2001) Investigation of CO2 welding arc sound: correlation of welding arc sound signal with welding spatter. Trans JWRI 30:29–33Google Scholar
  5. 5.
    Liu L, Lan H, Zheng H et al (2010) Relationship between arc sound signal and penetration status in MIG welding. J Mech Eng 46(14):79–84CrossRefGoogle Scholar
  6. 6.
    Pal K, Bhattacharya S, Pal SK (2010) Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding. J Mater Process Tech 210(10):1397–1410CrossRefGoogle Scholar
  7. 7.
    Lv N, Xu Y, Li S et al (2017) Automated control of welding penetration based on audio sensing technology. J Mater Process Technol 250:81–98CrossRefGoogle Scholar
  8. 8.
    Song S, Chen H, Lin T et al (2016) Penetration state recognition based on the double-sound-sources characteristic of VPPAW and hidden Markov Model. J Mater Process Technol 234:33–44CrossRefGoogle Scholar
  9. 9.
    Lyon RF, Mead C (1998) An analog electronic cochlea. Acoust Speech Signal Process 36(7):1119–1134CrossRefGoogle Scholar
  10. 10.
    Patterson RD, Moore BCJ (1986) Auditory filters and excitation patterns as representations of frequency resolution. In: Proceedings of frequency selectivity in hearing London, Academic Press, pp 123–177Google Scholar
  11. 11.
    Ma Y, Chen K, Wang N et al (2009) Application of auditory spectrum-based features into acoustic target recognition. Acta Acust 34(2):142–150Google Scholar
  12. 12.
    Tucker S, Brown G (2003) Modelling the auditory perception of size, shape and material: applications to the classification of transient sonar sounds. In: Proceedings of 114th convention audio engineering society, Amsterdam, NetherlandsGoogle Scholar
  13. 13.
    Tucker S, Brown G (2002) Investigating the perception of the size, shape and material of damped and free vibrating plates. Department of Computer Science, University of Sheffield, Sheffield, U.K., Tech. Rep CS-02-10Google Scholar
  14. 14.
    Glasberg BR, Moore BCJ (2002) A model of loudness applicable to time-varying sounds. J Audio Eng Soc 50(5):331–342Google Scholar
  15. 15.
    Greenwood DD (1998) A cochlear frequency-position function for several species—29 years later. J Acoust Soc Am 87(6):2592–2605CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Yanfeng Gao
    • 1
    Email author
  • Qisheng Wang
    • 1
  • Yanfeng Gong
    • 1
  • Linran Huang
    • 1
  1. 1.School of Aeronautic Manufacturing EngineeringNanchang Hangkong UniversityNanchangChina

Personalised recommendations