Advertisement

Human Motion Simulation and Analysis in Microgravity Environment Based on ADAMS

  • Chao-zhong Guo
  • Shi An
  • Ji-hong Yan
  • Shi-cheng Qing
Conference paper

Abstract

Microgravity has significant influence on the astronaut’s extravehicular tasks in space environment. This paper proposes an ADAMS based human motion simulation method to analyze the force and torque changes due to microgravity. According to basic theory of human anatomy, a human rigid model is built using SolidWorks 3D modeling software considering the human bones, joints and muscles structures, as well as the functions and pattern of motion of the body. The model refers to the 90 percentile of Chinese human body data, and keep all the main joints, in which the degree of freedom is considered to make sure the model design is reasonable and practical. Then the rigid model is imported into the ADAMS software by setting constraint, load and the motion angle to perform the dynamic analysis of the human body during one walking cycle. The force and torque of joints of shoulder, hip, knee and ankle are compared in normal gravity and microgravity environment. This paper provides necessary dynamic data for astronaut’s outer space training to optimize the operation ability when accomplishing space missions.

Keywords

ADAMS Human body model Microgravity Motion simulation 

Notes

Acknowledgements

This paper is supported by the National Natural Foundation of China (Grants No. 51505099 and No. 71390522).

References

  1. 1.
    M. Vukobratovic, V. Potkonjak, S.G. Tzafestas, Human and humanoid dynamics: from the past to the future. J. Int. Robot. Syst. 41(1), 65–84 (2004)CrossRefGoogle Scholar
  2. 2.
    J.M. Ohara, M. Briganti, J. Cleland, W. Dan, Extravehicular activities limitations study. Volume 2: Establishment of physiological and performance criteria for EVA gloves, in NTRS (1988)Google Scholar
  3. 3.
    X.D. Wang, Z. Wang, H. Li, C.H. Wang, Research on method of extravehicular spacesuit joint torque measurement and modeling. Space Med. Med. Eng. 28(3), 195–202 (2015)Google Scholar
  4. 4.
    A. Szcz˛esna, Verification of the Blobby Quaternion Model of Human Joint Limits, vol. 39, pp. 130–138 (2018)Google Scholar
  5. 5.
    X. Zhou, L. Draganich, F. Amirouche, A dynamic model for simulating a trip and fall during gait. Med. Eng. Phys. 24, 121–127 (2002)CrossRefGoogle Scholar
  6. 6.
    J. Liu, J. Zheng, Q. Wu, ADAMS-based human knee joint kinematics and dynamics research. Comput. Appl. Softw. 20(6), 202–204 (2012)Google Scholar
  7. 7.
    X. Li, G. Wang, G. Jin, Human modeling and motion simulation based on ADAMS. Mech. Eng. Autom. 4, 11–13 (2009)CrossRefGoogle Scholar
  8. 8.
    C. Ma, Y. Liu, X. Zhu, Research of human modeling and motion simulation based on ADAMS. Adv. Mater. Res. 1016, 292–297 (2014)CrossRefGoogle Scholar
  9. 9.
    L. Stirling, D.J. Newman, K. Willcox, Self-rotations in simulated microgravity: performance effects of strategy training. Aviat. Space Environ. Med. 80, 5–14 (2009)CrossRefGoogle Scholar
  10. 10.
  11. 11.
    A.N. Loginovsky, L.I. KhmarovaV, 3D Model of geometrically accurate Helical-Gear Set. Procedia Eng. 150, 734–741 (2016)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Chao-zhong Guo
    • 1
  • Shi An
    • 2
  • Ji-hong Yan
    • 1
  • Shi-cheng Qing
    • 1
  1. 1.Department of Industrial EngineeringHarbin Institute of TechnologyHarbinChina
  2. 2.School of ManagementHarbin Institute of TechnologyHarbinChina

Personalised recommendations