Advertisement

A Novel Approach of Low Power, Less Area, and Economic Integrated Circuits

  • Sanjeeda SyedEmail author
  • R. Thriveni
  • Pattan Vaseem Ali Khan
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 898)

Abstract

Foremost leading-edge integrated circuit applications like microprocessors, digital signal processors, RF processors, and mixed-signal processors need low power and less area of die utilization. This paper presents entirely a different method of designing and analyzing the primary modules of four-bit ripple carry adders, multiplexers of various sizes, full adders, and full subtractors based on decomposite Shannon’s expansions and MGDI techniques. The proposed systems are modules in nature indicating that it can easily be upgraded to various leading-edge ICs. The core benefit is less transistors and less power consumption. The implementation and analysis of these digital systems are done by using Microwind and Digital Schematic at 0.12 µm technology and analyzed area and total power consumption with different technologies and power supply voltages.

Keywords

CMOS MSD MSDFA MGDI RCA 

References

  1. 1.
    Saravanan, S., Madheswaran, M.: Design of low power, high performance area efficient Shannon based adder cell for neural network training. In: Control, Automation, Communication and Energy Conversation, INCACEC (2009)Google Scholar
  2. 2.
    Lee, J.D., Yoony, Y.J., Leez, K.H., Park, B.-G.: Application of dynamic pass-transistor logic to an 8-bit multiplier. J. Kor. Phys. Soc. 38(3), 220–223 (2001)Google Scholar
  3. 3.
    Purnima, K., AdiLakshmi, S., Sahithi, M., Rani, A.J., Poornima, J.; Design of modified Shannon based full adder cell using PTL logic for low power applicationsGoogle Scholar
  4. 4.
    Rawat, S., Sah, A., Pundir S.: Implementation of Boolean functions through multiplexers with the help of Shannon expansion theoremGoogle Scholar
  5. 5.
    Jiang, Y., Al-Sheraidah, A., Wang, Y., Sha, E., Chung, J.-G.: A novel multiplexer-based low-power full adder. IEEE Trans. Circuits Syst. II: Express Briefs 51(7), 345 (2004)CrossRefGoogle Scholar
  6. 6.
    Singh, M., Pandit, M.K., Jana, A.K.: Economic full adder circuit in VLSI using Shannon expansionGoogle Scholar
  7. 7.
    Aliotoa, M., Di Cataldob, G., Palumbob, G.: Mixed full adder topologies for high-performance low-power arithmetic circuits. Microelectron. J. 38 (2007). Received in revised form 4 Sept 2006; Accepted 11 Sept 2007CrossRefGoogle Scholar
  8. 8.
    Vishalatchi, S., Dhanam, B., Ramasamy, K.: Design, analysis and implementation of various full adder using GDI and MGDI techniqueGoogle Scholar
  9. 9.
    Bhattachatyya, P., Kundu, B., Ghosh, S., Kumar, V., Dandapat, A.: Performance analysis of a low-power high-speed hybrid 1-bit full adder circuit. IEEE Trans. VLSI Syst. 19(4) (2015)Google Scholar
  10. 10.
    Mohanty, B.K., Patel, S.K.: Area–delay–power efficient carry-select adder. IEEE Trans. Circuits Syst. II: Express Briefs 61(6) (2014)CrossRefGoogle Scholar
  11. 11.
    Ruiz, G.A., Granda, M.: An area-efficient static CMOS carry-select adder based on a compact carry look-ahead unit. Microelectron. J. Received in revised form 23 Aug 2004; Accepted 2 Sept 2004Google Scholar
  12. 12.
    Ramkumar, B., Kittur, H.M.: Low-power and area-efficient carry select adder. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 20(2) (2012)CrossRefGoogle Scholar
  13. 13.
    Chang, C.H., Gu, J.M., Zhang, M.: A review of 0.18 µm full adder performances for tree structured arithmetic circuits. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 13(6) (2005)Google Scholar
  14. 14.
    Hassoune, I., Flandre, D., O’Connor, I.: ULPFA: a new efficient design of a power-aware full adder. IEEE Trans. Circuits Syst. I: Regul. Pap. 57(8) (2010)MathSciNetCrossRefGoogle Scholar
  15. 15.
    Navia, K., Moaiyeri, M.H., Mirzaeem, R.F.: Two new low-power full adders based on majority-not gates. Microelectron. J. (2009)Google Scholar
  16. 16.
    Goel, S., Kumar, A., Bayoumi, M.A.: Design of robust, energy efficient full adders for deep submicrometer design using hybrid CMOS logic style. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 14(12) (2006)CrossRefGoogle Scholar
  17. 17.
    Aguirre-Hernandez, M., Linares-Aranda, M.: CMOS full adders for energy-efficient arithmetic applications. IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 19(4) (2011)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Sanjeeda Syed
    • 1
    Email author
  • R. Thriveni
    • 1
  • Pattan Vaseem Ali Khan
    • 2
  1. 1.Department of Electronics & Communication EngineeringAditya College of EngineeringMadanapalleIndia
  2. 2.Department of Information & TechnologyHonda Motor Cycles & Scooters India PVT., LTD-3FBangaloreIndia

Personalised recommendations