Advertisement

Investigation of Twin Cylinder Direct Injection CI Engine Characteristics Using Calophyllum Inophyllum Biodiesel Blends

  • Pathikrit BhowmickEmail author
  • Dhruv Malhotra
  • Pranjal Agarwal
  • Aatmesh Jain
  • K. C. Vora
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In the contemporary world, human consumption of energy in the form of fossil fuels is growing at an alarming rate and is a major concern for scientists as well as economists. In order to counter these phenomena, the study of biodiesel fuels is carried out by most researchers as an alternative to the conventional fossil fuels. In this present study, the effects of Calophyllum Inophyllum biodiesel blends on the engine performance, combustion, and emission characteristics were investigated. An experimental study was done on a twin cylinder diesel engine of direct injection type at a constant speed of 1500 rpm with Calophyllum Inophyllum methyl ester (CIME) biodiesel blends B5, B10, B20, and B100 by volume. Results showed that CIME blend B5 produced 3.28% lower BSFC and 4.8% higher BTE compared to pure diesel. Comparable combustion characteristics were observed for all biodiesel blends among which B5 showed the best results. B5 CIME blend depicted lower emission results with 12.29% and 9.57% decrease in HC and CO, respectively, as compared to conventional diesel. However, NOx emissions were found to be higher for all blend concentrations with respect to conventional diesel.

Keywords

Calophyllum Inophyllum Combustion Emissions Biodiesel blends 

References

  1. 1.
    Jeshvaghani, H.S., Fallahipanah, M., Gahruei, M.H., Chen, L.: Performance analysis of diesel engines fueled by biodiesel blends via thermodynamic situation of an air standard diesel cycle. Int. J. Environ. Sci. Technol.  https://doi.org/10.1007/s13762-013-0274-4CrossRefGoogle Scholar
  2. 2.
    Yogish, H., Chandarshekara, K., Pramod, M.R.: A study of performance and emission characteristics of computerized CI engine with composite biodiesel blends as fuel at various injection pressures. Heat Mass Transf. 49, 1345–1355 (2013).  https://doi.org/10.1007/s00231-013-1181-4CrossRefGoogle Scholar
  3. 3.
    Borugadda, V.B., Paul, A.K., Chaudhari, A.J., Kulkarni, V., Sahoo, N., Vaibhav, V.: Influence of waste cooking oil methyl ester biodiesel blends on the performance and emissions of a diesel engine. Waste Biomass Valor.  https://doi.org/10.1007/s12649-016-9749-0CrossRefGoogle Scholar
  4. 4.
    Venkanna, B.K., Reddy, C.V.: Biodiesel production and optimization from Calophyllum Inophyllum linn oil (honne oil)—a three stage method. Biores. Technol. 100, 5122–5125 (2009).  https://doi.org/10.1016/j.biortech.2009.05.023CrossRefGoogle Scholar
  5. 5.
    Ong, H.C., Mahlia, T.H.I., Masjuki, H.H., Norhasyima, R.S.: Comparison of palm oil, Jatropha Curcas and Calophyllum Inophyllum for biodiesel: a review. Renew. Sustain. Energy Rev. 15, 3501–3515 (2011).  https://doi.org/10.1016/j.rser.2011.05.005CrossRefGoogle Scholar
  6. 6.
    Atabani, A.E., Cesar, A.S.: Calophyllum Inophyllum L.—a prospective non-edible biodiesel feedstock. Study of biodiesel production, properties, fatty acid composition, blending and engine performance. Renew. Sustain. Energy Rev. 37, 644–655 (2014)CrossRefGoogle Scholar
  7. 7.
    Sanjid, A., Masjuki, H.H., Kalam, M.A., Ashrafur, R.S.M., Abedin, M.J., Palash, S.M.: Impact of palm, mustard, waste cooking oil and Calophyllum Inophyllum biofuels on performance and emission of CI engine. Renew. Sustain. Energy Rev. 27, 664–682 (2013).  https://doi.org/10.1016/j.rser.2013.07.059CrossRefGoogle Scholar
  8. 8.
    Ong, H.C., Masjuki, H.H., Mahlia, T.M.I., Silitonga, A.S., Chong, W.T., Leong, K.Y.: Optimization of biodiesel production and engine performance from high free fatty acid Calophyllum Inophyllum oil in CI diesel engine. Energy Convers. Manag. 81, 30–40 (2014).  https://doi.org/10.1016/j.enconman.2014.01.065CrossRefGoogle Scholar
  9. 9.
    Monirul, I.M., Masjuki, H.H., Kalam, M.A., Mosarof, M.H., Zulkifli, N.W.M., Teoh, Y.H., How, H.G.: Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum Inophyllum biodiesel blends. Fuel (2016).  https://doi.org/10.1016/j.fuel.2016.05.010CrossRefGoogle Scholar
  10. 10.
    Ong, H.C., Masjuki, H.H., Mahlia, T.M.I., Silitonga, A.S., Chong, W.T., Yusaf, T.: Engine performance and emissions using Jatropha Curcas, Ceiba Pentandra and Calophyllum Inophyllum biodiesel in a CI diesel engine. Energy 69, 427–445 (2014).  https://doi.org/10.1016/j.energy.2014.03.035CrossRefGoogle Scholar
  11. 11.
    Rahman, S.M.A., Masjuki, H.H., Kalam, M.A., Abedin, M.J., Sanjid, A., Sajjad, H.: Production of palm and Calophyllum Inophyllum based biodiesel and investigation of blend performance and exhaust emission
in an unmodified diesel engine at high idling conditions. Energy Convers. Manage. 76, 362–367 (2013).  https://doi.org/10.1016/j.enconman.2013.07.061CrossRefGoogle Scholar
  12. 12.
    Ashok, B., Nanthagopal, K., Jeevanantham, A.K., Bhowmick, P., Malhotra, D., Agarwal, P.: An assessment of Calophyllum Inophyllum biodiesel fuelled diesel engine characteristics using novel antioxidant additives. Energy Convers. Manage. 148, 935–943 (2017).  https://doi.org/10.1016/j.enconman.2017.06.049CrossRefGoogle Scholar
  13. 13.
    Muthukumaran, N., Saravanan, C.G., Yadav, S.P.R., Vedharaj, V.S., Roberts, W.L.: Synthesis of cracked Calophyllum Inophyllum oil using fly ash catalyst for diesel engine application. Fuel 155, 68–76 (2015).  https://doi.org/10.1016/j.fuel.2015.04.014CrossRefGoogle Scholar
  14. 14.
    Palash, S.M., Kalam, M.A., Masjuki, H.H., Masum, B.M., Fattah, I.M.R., Mofijur, M.: Impacts of biodiesel combustion on NOx emissions and their reduction approaches. Renew. Sustain. Energy Rev. 23, 473–490 (2013).  https://doi.org/10.1016/j.rser.2013.03.003CrossRefGoogle Scholar
  15. 15.
    Mosarof, M.H., Kalam, M.A., Masjuki, H.H., Alabdulkarem, A., Ashraful, A.M., Arslan, A., Rashedul, H.K., Monirul, I.M.: Optimization of performance, emission, friction and wear characteristics of palm and Calophyllum Inophyllum biodiesel blends. Energy Convers. Manag. 118, 119–134 (2016).  https://doi.org/10.1016/j.enconman.2016.03.081CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Pathikrit Bhowmick
    • 1
    Email author
  • Dhruv Malhotra
    • 1
  • Pranjal Agarwal
    • 1
  • Aatmesh Jain
    • 1
  • K. C. Vora
    • 1
  1. 1.ARAI Academy, The Automotive Research Association of IndiaPuneIndia

Personalised recommendations