Advertisement

The Theoretical Investigation of Several Probability Density Function Associated with the Roughness Characteristics for the Performance of Rough Slider Bearing

  • Himanshu C. Patel
  • Mehul P. Patel
  • Nimeshchandra S. Patel
  • G. M. Deheri
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

The paper examines the effects of surface roughness on film pressure in hydrodynamic slider bearings. The estimation of the effect of surface roughness has been done on the basis of the stochastic theory, which is developed by Christensen and Tonder model. Three different types of probability density functions have been used to evaluate the effect of the longitudinal surface roughness leading to a comparison of the bearing performances. After solving the Reynolds type equation the pressure distribution is obtained. This is then used to compute the load carrying capacity. Besides, friction has also been obtained using different models. This study studies various mathematical models for estimation of pressure distribution, which may be helpful to the engineers for better design of the bearing systems. ...

Keywords

Reynolds’ equation Longitudinal roughness Probability density functions Fluid film pressure Load carrying capacity 

References

  1. 1.
    Bhushan, B. (ed.): Handbook of Micro/Nano Tribology. CRC Press, New York (1995)Google Scholar
  2. 2.
    Tzeng, S.T., Saibel, E.: Surface roughness effect on slider bearing lubrication. Trans. ASME. J. Lub. Tech., 10, 334-338, (1967a)CrossRefGoogle Scholar
  3. 3.
    Christensen, H., Tonder, K.C.: Tribology of Rough Surfaces: Stochastic Models of Hydrodynamic Lubrication. SINTEF Report No. 10/69-18 (1969a)Google Scholar
  4. 4.
    Christensen, H., Tonder, K.C.: Tribology of Rough Surfaces: Parametric Study and Comparison of Lubrication Models. SINTEF Report No. 22/69-18 (1969b)Google Scholar
  5. 5.
    Christensen, H., Tonder, K.C.: The hydrodynamic lubrication of rough bearing surfaces of finite width. ASME-ASLE Lubrication Conference; Paper No. 70-Lub-7 (1970)Google Scholar
  6. 6.
    Prakash, J., Tiwari, K.: Roughness effects in porous circular squeeze-plates with arbitrary wall thickness. J. Lub. Tech. 105, 90–98 (1983)CrossRefGoogle Scholar
  7. 7.
    Patel, H.C., Deheri, G.M.: Characteristics of lubrication at nano scale on the performance of transversely rough slider bearing. Mechanics 80(6), 64–71 (2009)Google Scholar
  8. 8.
    Sinha, P., Adamu, G.: THD analysis for slider bearing with roughness: special reference to load generation in parallel sliders. Acta mechanica 207(1-2), 11–27 (2009)CrossRefGoogle Scholar
  9. 9.
    Gururajan, K., Prakash, J.: Surface roughness effects in infinitely long porous journal bearings. J. Tribol. 121(1), 139–147 (1999)CrossRefGoogle Scholar
  10. 10.
    Panchal, G.C., Patel, H.C., Deheri, G.M.: Influence of Surface Roughness through a series of flow factors on the performance of a longitudinally rough finite slider bearing. Ann. Fac. Eng. Hunedoara 14(2), 227 (2016)Google Scholar
  11. 11.
    Patel, N.S., Vakharia, D., Deheri, G.: Hydrodynamic journal bearing lubricated with a ferrofluid. Ind. Lubr. Tribolo. 69(5), 754–760 (2017)CrossRefGoogle Scholar
  12. 12.
    Ohkubo, T., Kishigami, J.: Accurate measurement of gas-lubricated slider bearing separation using visible laser interferometry. J. Tribol. 110(1), 148–155 (1988)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.L. D. College of EngineeringAhmedabadIndia
  2. 2.K. D. PolytechnicPatanIndia
  3. 3.Faculty of TechnologyD. D. UniversityNadiadIndia
  4. 4.S. P. UniversityVallabh VidyanagarIndia

Personalised recommendations