Advertisement

Hydraulic Characterisation of Clay Rock Under Consideration of Coupled THM Properties

  • Hua Shao
  • Jürgen Hesser
  • Olaf Kolditz
  • Wenqing Wang
Conference paper
Part of the Environmental Science and Engineering book series (ESE)

Abstract

Clay rock is being investigated in many countries as a potential host rock for nuclear waste repositories. Due to the state of over-consolidation and water saturation, characterisation of undisturbed rock with regard to its hydraulic and mechanical properties is a big challenge. Increased complexity is caused by temperature change in the repository of high-level waste. In situ measurement of single component, e.g. rock permeability, was conducted in the Mont Terri Rock Laboratory (CH) and the French Underground Research Laboratory Bure. Several so-called heater experiments are being carried out at different scale. The measured data including temperature, humidity, pore pressure, and deformation in various boreholes shows strong coupling effects. For interpretation of the experimental data, a numerical 3D code OpenGeoSys (OGS) was developed taking into account the strongly coupled thermal, hydraulic and mechanical processes. Because of the significant dependency of the thermal conductivity on the water saturation, the determination of the saturation state, which is again controlled by hydraulic permeability, is therefore important. The evaluated permeability from packer tests can be validated using numerical modelling. The state-dependency on the pressure, saturation and temperature is discussed.

Keywords

Disposal of nuclear waste Underground laboratories Hydraulic measurement Coupled THM modelling OpenGeoSys 

References

  1. Gaus I, Garitte B, Senger R, Gens A, Vasconcelos R, Garcia-Sineriz JL, Trick T, Wiezo-rek K, Czaikowski O, Schuster K, Mayor JC, Velasco M, Kuhlmann U, Villar MV (2014) The HE-E Experiment: layout, Interpretation and THM modelling. Arbeitsbericht NAB 14-53Google Scholar
  2. Kolditz O, Shao H, Wang W-Q, Bauer B (2014) Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media – Modelling and Benchmarking. Springer, HeidelbergGoogle Scholar
  3. Müller HR, Garitte B, Vogt T, Köhler S, Sakaki T, Weber HP, Spillmann T, Hertrich M, Becker JK, Giroud N, Cloet V, Diomidis N, Vietor T (2017) Implementation of the full-scale (FE) experiment at the Mont Terri rock laboratory. Swiss J. Geosci.Google Scholar
  4. Schuster K, Amann F, Yong S, Bossart P, Connolly P (2017) High-resolution mini-seismic methods applied in the Mont Terri rock laboratory (Switzerland), Swiss J. Geosci.  https://doi.org/10.1007/s00015-016-0241-4CrossRefGoogle Scholar
  5. Shao H, Paul B, Wang XR, Hesser J, Becker J, Garitte B, Müller H (2016) The influence of different supports on the properties of the excavation damaged zone along the FE tunnel in the Mont Terri Underground Rock Laboratory, Geological Society LondonGoogle Scholar
  6. Thury M, Bossart P (1999) Mont Terri Rock Laboratory – Results of the hydrogeological, geo-chemical and geotechnical experiments, Swiss National Hydrological and Geological Survey, BernGoogle Scholar
  7. Vietor T (2009) MB experiment: Database of report. Mont Terri Technical Note TN2009, Mont Terri Project, Saint Ursanne, SwitzerlandGoogle Scholar
  8. Xu WJ, Shao H, Marschall P, Hesser J, Kolditz O (2013) Analysis of flow path around the sealing section HG-A experiment in the Mont Terri rock laboratory. Environ Earth Sci 70:3363.  https://doi.org/10.1007/s12665-013-2403-2CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Hua Shao
    • 1
  • Jürgen Hesser
    • 1
  • Olaf Kolditz
    • 2
  • Wenqing Wang
    • 2
  1. 1.Federal Institute for Geosciences and Natural ResourcesHanoverGermany
  2. 2.Helmholtz-Centre for Environmental Research (UFZ)LeipzigGermany

Personalised recommendations