Advertisement

Analysis of Consolidation Processing of Piezocone Penetration Test in Cutoff Wall

  • Xuepeng Li
  • Guojun Cai
  • Songyu Liu
  • Yuchao Li
Conference paper
Part of the Environmental Science and Engineering book series (ESE)

Abstract

The piezocone penetration test (CPTU) is now widely used as an efficient and economical in-situ geotechnical investigation technology. The CPTU not only can provide the data of conventional cone penetration test (CPT), but also give a continuous profile of pore pressure. Furthermore, when the piezocone is halted in soil with a specific depth, the excess pore pressure produced by penetration will be dissipated until the value of zero. This paper investigates the consolidation processing after the piezocone is penetrated into soil-bentonite cutoff wall in a landfill site, China. A finite-element procedure is also used for simulating the consolidating processing of soil-bentonite backfills. The coefficient of consolidation and hydraulic conductivity of soil-bentonite backfills can be evaluated from the consolidation processing of excess pore pressure. The paper gives the necessity and importance of simulation of consolidation processing by finite-element procedure.

Keywords

Soil-bentonite Consolidation processing CPTU Finite-element procedure 

Notes

Acknowledgements

Majority of the work presented in this paper was supported by the following supporting funds Organization: The National Natural Science Foundation of China (Grant No. 41672294) and The Foundation of Jiangsu Province Outstanding Youth (Grant No. BK20140027). We deeply appreciate your consideration of our manuscript, and we look forward to receiving comments from the reviewers.

References

  1. Burns SE, Mayne PW (1998) Monotonic and dilatory pore-pressure decay during piezocone tests in clay. Can Geotech J 35(6):1063–1073CrossRefGoogle Scholar
  2. Cai GJ, Liu SY, Tong LY (2010) Field evaluation of deformation characteristics of a lacustrine clay deposit using seismic piezocone tests. Eng Geol 116(3–4):251–260CrossRefGoogle Scholar
  3. Cai GJ, Liu SY, Puppala AJ (2011) Comparison of CPT charts for soil classification using PCPT data: example from clay deposits in Jiangsu Province, China. Eng Geol 121(1–2):89–96CrossRefGoogle Scholar
  4. Chai JC, Sheng D, Carter JP et al (2012) Coefficient of consolidation from non-standard piezocone dissipation curves. Comput Geotech 41:13–22CrossRefGoogle Scholar
  5. Chai JC, Hossain MJ, Yuan DJ, Shen SL, Carter JP (2015) Pore pressures induced by piezocone penetration. Can Geotech J 53(3):540–550CrossRefGoogle Scholar
  6. Ha TG, Jang IS, Choo YS et al (2014) Evaluation of coefficient of consolidation for dilatory dissipation in piezocone test in overconsolidated cohesive soils. KSCE J Civ Eng 18(2):475–487CrossRefGoogle Scholar
  7. Krage CP, DeJong JT, Schnaid F (2015) Estimation of the coefficient of consolidation from incomplete cone penetration test dissipation tests. J Geotech Geoenviron Eng 141(2). Article number 06014016CrossRefGoogle Scholar
  8. Mayne PW, Campanella G (2005) Versatile site characterization by seismic piezocone. In: Proceedings of the 16th international conference on soil mechanics and geotechnical engineering, Osaka, Japan, 2, pp 721–724Google Scholar
  9. McQueen W, Miller B, Mayne PW et al (2015) Piezocone dissipation tests at the Canadian Test Site No. 1, Gloucester, Ontario. Can Geotech J 53(5):884–888CrossRefGoogle Scholar
  10. Teh CI, Houlsby GT (1991) An analytical study of the cone penetration test in clay. Geotechnique 41(1):17–34CrossRefGoogle Scholar
  11. Robertson PK, Wride CE (1998) Evaluating cyclic liquefaction potential using the cone penetration test. Can Geotech J 35(3):442–459CrossRefGoogle Scholar
  12. Yu HS, Herrmann LR, Boulanger RW (2000) Analysis of steady cone penetration in clay. J Geotech Geoenviron Eng 126(7):594–605CrossRefGoogle Scholar
  13. Walker J, Yu HS (2006) Adaptive finite element analysis of cone penetration in clay. Acta Geotech 1(1):43–57CrossRefGoogle Scholar
  14. Sheng D, Eigenbrod KD, Wriggers P (2005) Finite element analysis of pile installation using large slip frictional contact. Comput Geotech 32:17–26CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  • Xuepeng Li
    • 1
  • Guojun Cai
    • 1
  • Songyu Liu
    • 1
  • Yuchao Li
    • 2
    • 3
  1. 1.Institute of Geotechnical EngineeringSoutheast UniversityNanjingChina
  2. 2.MOE Key Laboratory of Soft Soils and Geoenvironmental EngineeringZhejiang UniversityHangzhouChina
  3. 3.College of Civil Engineering and ArchitectureZhejiang UniversityHongzhouChina

Personalised recommendations