Advertisement

Upgrade of the ATLAS Tile Calorimeter for the High Luminosity LHC

  • F. Tang
  • on behalf of the ATLAS Tile Calorimeter System
Conference paper
Part of the Springer Proceedings in Physics book series (SPPHY, volume 213)

Abstract

The ATLAS hadronic Tile Calorimeter (TileCal) covers the central angular region of the detector. The TileCal will undergo a major replacement of its on- and off-detector electronics in 2024 for the high luminosity program of the LHC. The TileCal signals will be digitized and sent directly to the off-detector electronics, which will store them in fixed-latency buffers and digitally construct and transmit trigger sums for the Level-1 trigger at a rate of 40 MHz. The improved signal resolution and precision will allow more complex and effective algorithms to be implemented in the Level-1 trigger hardware. Three different front-end options are currently being investigated for the TileCal upgrade with extensive test beam studies to determine which option will be selected. The off-detector electronics are based on the Advanced Telecommunications Computing Architecture (ATCA) standard and are equipped with large, modern FPGAs and high-performance optical links. The on-detector electronics are designed to operate in a high radiation environment and has a high level of redundancy. The large scale, high performance FPGAs are also extensively used for the logic functions and data links in data acquisition for on-detector electronics. A hybrid Demonstrator prototype with the new calorimeter module electronics, but still compatible with the present system, is planned to be inserted in ATLAS in one of the next winter shutdowns.

We present the components of the Tile Calorimeter upgrade for the high luminosity LHC, the production and performance of the readout electronics prototypes, the results of the beam tests at CERN and the plans for the next years.

Keywords

LHC HL-LHC Tile calorimeter Analog front-end readout ATCA 

References

  1. 1.
    Schmidt, B.: The high-luminosity upgrade of the LHC. J. Phys. Conf. Ser. 706, 022002 (2016)CrossRefGoogle Scholar
  2. 2.
    Tang, F., et al.: Upgrade analog readout and digitizing system for ATLAS TileCal demonstrator. IEEE Trans. Nucl. Sci. 60(2), 1255–1259 (2013)ADSCrossRefGoogle Scholar
  3. 3.
    Tang, F., et al.: IEEE Trans. Nucl. Sci. 62(3), 1045–1049 (2015)Google Scholar
  4. 4.
    Drake, G., et al.: QIE12: a new high performance ASIC for the ATLAS TileCal upgrade. In: Topical Workshop on Electronics for Particle Physics, Lisbon, Portugal (2015)Google Scholar
  5. 5.
    Pillet, N.: FATALIC, a wide dynamic range integrated circuits for the TileCal VFE atlas upgrade. In: TWEPP 2011 - Topical Workshop on Electronics for Particle Physics, Vienne, Austria, September 2011 (2011)Google Scholar
  6. 6.
    Bohm, C., On behalf of the ATLAS Tile Calorimeter System: A hybrid readout system for the ATLAS TileCal phase 2 upgrade demonstrator. In: ATL-TILECAL-PROC-2012-014 Google Scholar
  7. 7.
    Carrió, F., et al.: The sROD module for the ATLAS tile calorimeter upgrade demonstrator. In: Proceedings IEEE Nuclear Science Symposium and Medical Imaging Conference, Seattle, WA, USA, November 2014, pp. 8–15 (2014)Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd.  2018

Authors and Affiliations

  • F. Tang
    • 1
  • on behalf of the ATLAS Tile Calorimeter System
  1. 1.The University of ChicagoChicagoUSA

Personalised recommendations