High-Strength Titanium Alloy Oil Well Pipe Material with High Hardness and Anti-galling Property

Conference paper
Part of the Springer Proceedings in Energy book series (SPE)

Abstract

Titanium alloys are usually used as the material of oil well pipes in the petroleum industry for its high specific strength, excellent corrosion resistance, high and low temperature resistance performance and high fatigue strength. However, due to inadequate strength and hardness, titanium alloy oil well pipes often suffer from thread galling during casing makeup. In this paper, the phase transformations in titanium alloys were described. Combined with the microstructural and strengthen mechanism of titanium alloys, the concepts for the research and development of anti-galling titanium alloy oil well pipe materials were also discussed.

Keywords

Titanium alloys Oil well pipe Thread galling Phase transformation Strength 

Notes

Acknowledgements

This work was supported by the Innovative training program (KSZ16113) and Scientific Research Foundation and Opening Foundation (X151516KCL23) of Southwest Petroleum University, and open fund of Fujian Provincial Key Laboratory of Materials Genome (Xiamen University). Xin Wang acknowledges a funding from the Department of Education of Sichuan Province (17ZA0419) as well as scientific research starting project funding (2017QHZ020) and start-up funding from Southwest Petroleum University.

References

  1. 1.
    A. Shadravan, M. Amani, HPHT 101-What petroleum engineers and geoscientists should know about high pressure high temperature wells environment. Energy Sci. Technol. 4, 36–60 (2012)Google Scholar
  2. 2.
    D.S. Ye, Y. Ren, B. Guan, C.B. Yin, Difficulty and strategy of reservoir stimulation on abnormal-high temperature and high pressure wells in the Tarim basin. Natur. Gas Ind. 29, 77–79 (2009)Google Scholar
  3. 3.
    B. Craig, Materials for deep oil and gas well construction. Adv. Mater. Process. 166, 33–35 (2008)Google Scholar
  4. 4.
    U. Wiklund, I.M. Hutchings, Investigation of surface treatments for galling protection of titanium alloys. Wear 251, 1034–1041 (2001)CrossRefGoogle Scholar
  5. 5.
    K. Bybee, Titanium-drillpipe development for short-radius drilling. J. Petrol. Technol. 52, 50–53 (2015)Google Scholar
  6. 6.
    R.D. Kane, S. Srinivasan, B. Craig, K.M. Yap, A Comprehensive Study of Titanium Alloys for High Pressure High Temperature (HPHT) Wells, Corrosion 2015. NACE International (Omnipress, Houston, 2015)Google Scholar
  7. 7.
    L. Zeng, T.R. Bieler, Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of α, α′, α″ and β phases in Ti–6Al–4V wire. Mater. Sci. Eng, A 392, 403–414 (2005)CrossRefGoogle Scholar
  8. 8.
    I. Lonardelli, N. Gey, H.R. Wenk, M. Humbert, S.C. Vogel, L. Lutterotti, In situ observation of texture evolution during α → β and β → α phase transformations in titanium alloys investigated by neutron diffraction. Acta Mater. 55, 5718–5727 (2007)CrossRefGoogle Scholar
  9. 9.
    S. Nag, R. Banerjee, R. Srinivasan, J.Y. Hwang, M. Harper, H.L. Fraser, ω-Assisted nucleation and growth of α precipitates in the Ti-5Al-5Mo-5V-3Cr-0.5Fe β titanium alloy. Acta Mater. 57, 2136–2147 (2009)CrossRefGoogle Scholar
  10. 10.
    O. Yasuya, O. Toshitaka, N. Kiyomichi, K. Sengo, Effects of ω-phase precipitation on β → α, α″ transformations in a metastable β titanium alloy. Mater. Sci. Eng., A. 312, 182–188 (2001)CrossRefGoogle Scholar
  11. 11.
    X.K. Ma, F.G. Li, J.H. Li, J. Cao, P. Li, J.Z. Dong, Effect of heat treatment on the microstructure and micro-mechanical behavior of quenched Ti-6Al-4V alloy. J. Mater. Eng. Perform. 24, 1–12 (2015)CrossRefGoogle Scholar
  12. 12.
    Y.Z. He, W.X. Zhang, H.W. Zhou, Y.F. Lu, Z.P. Xi, Decomposition of orthorhombic martensite in TC21 alloy during aging treatment. Rare Metal. Mat. Eng. 41, 800–804 (2012)Google Scholar
  13. 13.
    Z.B. Zhou, J.S. Li, H.C. Kou, Z.S Zhu, B. Tang, H. Chang, Aging response of TB-13 titanium alloy. Mater. Sci. Forum. 654, 859–862 (2010)CrossRefGoogle Scholar
  14. 14.
    B. Wu, J.J. Shen, J. Sun, Z. Zhang, S.S. Hui, Application of CALPHAD technology in development of advanced titanium alloys. Acta Metall. Sin. 38, 644–649 (2002)Google Scholar
  15. 15.
    S. Avraham, Y. Maoz, M. Bamberger, Application of the CALPHAD approach to Mg-alloys design. CALPHAD 31, 515–521 (2007)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.School of Materials Science and EngineeringSouthwest Petroleum UniversityChengduChina
  2. 2.College of Materials and Fujian Provincial Key Laboratory of Materials GenomeXiamen UniversityXiamenChina

Personalised recommendations