Polishing on Cubic Boron Nitride Abrasive Materials of Bearing Hollow Roller

Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In order to solve the engineering problem for uniformly polishing the inner hole of the bearing hollow roller, the abrasive flow machining method was used to polish the hollow bearing of the large bearing with 46 mesh/220 mesh cubic boron nitride (CBN) abrasive. The experimental results showed that the difficult polished surface could be obtained by using various particle size of CBN abrasive under the same abrasive flow machine (AFM) parameters. Moreover, the polished surface matched with the used CBN abrasive. In addition, the polishing effect was better if the uniform precision polishing was performed in steps for polishing thicker oxide film machining surface.

Keywords

Abrasive flow machine Hollow pillar roller polishing CBN abrasive 

Notes

Acknowledgements

The financial support for this research provided by the General project of scientific research of Liaoning Province in China No. L2015085 and No. L201613 and the abrasive flow machine equipment provided in the experiment by the of the Dalian university of technology are greatly appreciated.

References

  1. 1.
    J. Rhoads, Abrasive Flow Machining, Cutting Tool Engineering, pp. 75–78 (1988)Google Scholar
  2. 2.
    J. Rhoads, T. Kohut, N.N. Fick et al., Abrasive flow machining and polishing device: US. Patent 012335 (1994)Google Scholar
  3. 3.
    R.K. Jain, V.K. Jain, P.M. Dixit, Modelling of materials removal and surface roughness in abrasive flow machining process. Int. J. Mach. Tools Manuf 39, 1903–1923 (1999)CrossRefGoogle Scholar
  4. 4.
    L.J. Rhoades, Abrasive flow machining: a case study. J. Mater. Process. Technol. 28, 107–116 (1991)CrossRefGoogle Scholar
  5. 5.
    L.J. Rhoades, The development of abrasive flow machine in multitudinous production. Automobile manufacturing international symposium on equipment and technology and process set (1) (1999)Google Scholar
  6. 6.
    R.E. Williams, K.P. Rajurkar, Metal removal and surface finish characteristics in abrasive flow machining, in Mechanics of Deburring and Surface Finishing Processes. New york, ASME, 1989 93–106Google Scholar
  7. 7.
    G. Song, Abrasive Flow Machining Technology of Theoretical Analysis and Experimental Study (TaiYuan University of technology, TaiYuan, 2010)Google Scholar
  8. 8.
    S. Ji, B. Tang, D. Tan et al., Structured surface precision finishing soft abrasive flow machining method and abrasive flow mechanics numerical analysis. J. Mech. Eng. 46–48(15), 178–184 (2010)CrossRefGoogle Scholar
  9. 9.
    L.J. Rhoads, T. Kohut, N.N. Fick et al, Abrasive flow machining and polishing device: PCT/US1994/012335. China, CN1069859C (1994), pp. 10–24Google Scholar
  10. 10.
    M.R. Sankar, V.K. Jain, J. Ramkumar, Y.M. Joshi, Int. J. Mach. Tool Manu. 51, 947 (2011)CrossRefGoogle Scholar
  11. 11.
    R.E. Williams, Acoustic emission characteristics of abrasive flow machining. J. Manuf. Sci. Eng. 120, 264–271 (1998)CrossRefGoogle Scholar
  12. 12.
    P.J. Davices, A.J. Fletcher, J. Mech. Eng. Sci. 209(6), 408–418 (1995)Google Scholar
  13. 13.
    A.J. Flectcher, A. Fioravanti, Proc. Inst. Mech. Eng. 210, 254–265 (1996)Google Scholar
  14. 14.
    V.K. Gorana, V.K. Jain, G.K. Lal, Experimental investigation into cutting forces and active grain density during abrasive flow machining. Int. J. Mach. Tools Manuf 44, 201–211 (2004)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Application and Technology College of DalianOcean UniversityDalianChina

Personalised recommendations