Influence of Surface Buffer Layer Thickness and Deposition Rate on the Release Rate of Silver Ions in Ag–TiOx Nanocomposites

Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

In this paper, different surface buffer layers (barrier layer) were deposited on Ag–TiO2 2D and 3D structure of nanocomposite films by using magnetron sputtering, and the influence of different deposition conditions of buffer layers on silver ion release rate were investigated. The results showed that the buffer layer obtained at relative higher deposition rate (about 20 nm/min) had better inhibitory effect on the control of silver nano particle agglomeration on the surface of composite thin films and silver ion release rate, compared with the buffer layer produced at lower rate of deposition conditions (5 nm/min). Therefore, high rate deposition is the recommended condition for better composite film morphology and lower release rate of silver ions in the process of sputtering deposition of Ag–TiOx nanocomposite films.

Keywords

Surface buffer layer Deposition rate Silver ions Ag–TiOx nanocomposite 

Notes

Acknowledgements

This work is supported by Hubei Provincial Natural Science Foundation of China (2016CFB292). The financial support by Open Research Fund Program of Key Laboratory of Hydraulic Machinery Transients, Ministry of Education of the People’s Republic of China (201504) and the Startup Foundation of Hubei University of Technology (BSQD14020) are also appreciated.

References

  1. 1.
    S.W. Ryu, E.J. Kim, S.K. Ko, S.H. Hahn, Effect of calcination on the structural and optical properties of M/TiO2 thin films by RF magnetronco-sputtering. Mater. Lett. 58, 582–587 (2004)CrossRefGoogle Scholar
  2. 2.
    J.G. Yu, J.F. Xiong, B. Cheng, S.W. Liu, Fabrication and characterization of Ag–TiO2 multiphase nanocomposite thin films with enhanced photocatalytic activity. Appl. Catal. B-Environ. 60, 211–221 (2005)CrossRefGoogle Scholar
  3. 3.
    D.S. Kommireddy, S.M. Sriram, Y.M. Lvov, Stem cell attachment to layer-by-layer assembled TiO2 nanoparticle thin films. Biomaterials 27, 4296–4303 (2006)CrossRefGoogle Scholar
  4. 4.
    A.C. Mo, J. Liao, W. Xu, Preparation and antibacterial effect of silver–hydroxyapatite/titania nanocomposite thin film on titanium. Appl. Surf. Sci. 255, 435–438 (2008)CrossRefGoogle Scholar
  5. 5.
    A.R. Malagutti, H. Mourao, J.R. Garbin, Deposition of TiO2 and Ag:TiO2 thin films by the polymeric precursor method and their application in the photodegradation of textile dyes. Appl. Catal. B-Environ. 90, 205–212 (2009)CrossRefGoogle Scholar
  6. 6.
    D.H. Song, S.H. Uhm, S.B. Lee, Antimicrobial silver-containing titanium oxide nanocomposite coatings by a reactive magnetron sputtering. Thin Solid Films 509, 7079–7085 (2011)CrossRefGoogle Scholar
  7. 7.
    O. Akhavan, Lasting antibacterial activities of Ag-TiO2/Ag/a-TiO2 nanocomposite thin film photocatalysts under solar light irradiation. J. Coll. Inter. Sci. 336, 117–124 (2009)CrossRefGoogle Scholar
  8. 8.
    O. Akhavan, E. Ghaderi, Self-accumulated Ag nanoparticles on mesoporous TiO2 thin film with high bactericidal activities. Surf. Coat. Technol. 204(2010), 3676–3683 (2010)CrossRefGoogle Scholar
  9. 9.
    J.X. Zhao, B.P. Zhang, Y. Li, Optical and photocatalytic properties of TiO2/Ag-SiO2 nanocomposite thin films. J. Alloy. Comp. 535, 21–26 (2012)CrossRefGoogle Scholar
  10. 10.
    V.S.K. Chakravadhanala, T. Hrkac, V. Zaporojtchenko, F. Faupel, Nanostructural and functional properties of Ag-TiO2 coatings prepared by co-sputtering deposition technique. J. Nanosci. Nanotechnol. 11, 4893–4899 (2011)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.Hubei Collaborative Innovation Center for High-Efficiency Utilization of Solar EnergyHubei University of TechnologyWuhanChina
  2. 2.School of Chemical Engineering and PharmacyWuhan Institute of TechnologyWuhanChina

Personalised recommendations