Abstract
The mechanical and tribological properties of potassium titanate whiskers (PTW) and carbon fiber (CF)-reinforced, tung oil-modified phenolic resin (PR) composites were investigated by utilizing a pad-on-disk type friction tester. It was found that the tung oil-modified phenolic composites showed superior wear resistance and steady variation of friction coefficients. It was revealed that the synergistic effects of sub-micrometer PTW and micrometer CF existed in the tung oil-modified PR composites. Then the friction stability, wear rate and morphology of the worn surfaces were examined to study the synergistic effects. The tung oil-modified PR/PTW/CF composites showed superior wear resistance and steady variation of friction coefficients. The friction coefficient increased with increasing addition of PTW. The wear resistance increased with increasing addition of CF. And the outcropped PTW around the CF to protect CF from easy damage and pulled-out. When the content of PTW was high the degradation of wear resistance and the friction coefficient increased, which was of due to the agglomeration and lapping joint of PTW. CF could improve the wear resistance of the tung oil-modified PR composites at the high temperatures significantly because of its suitable thermal conductivity.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
S.J. Kim, M.H. Cho, D.S. Lim, H. Jang, Synergistic effects of aramid pulp and potassium titanate whiskers in the automotive friction material. Wear 251, 1484–1491 (2001)
M.G. Jacko, S.K. Rhee, Kirk-Othmer Encyclopedia of Chemical Technology, 4th edn. (Wiley, New York, 1992)
M.G. Jacko, P.H.S. Tsang, S.K. Rhee, Automotive friction materials evolution during the past decade. Wear 100, 503–515 (1984)
A.E. Anderson, ASM handbook, friction, lubrication and wear technology. ASM Int. 18, 569–577 (1992)
S.C. Ho, J.H. Chern Lin, C.P. Ju, Effect of fiber addition on mechanical and tribological properties of a copper/phenolic-matrix friction material. Wear 258, 861–869 (2005)
X. Feng, J.Z. Lü, X.H. Lu, Application of potassium titanate whisker in composite. Acta Materiae Compositae Sin. 16, 1–7 (1999)
G.S. Zhuang, G.X. Sui, H. Meng, Z.S. Sun, R. Yang, Mechanical properties of potassium titanate whiskers reinforced poly(ether ether ketone) composites using different compounding processes. Compos. Sci. Technol. 67, 1172–1181 (2007)
Y.C. Kim, M.H. Cho, S.J. Kim, H. Jang, The effect of phenolic resin, potassium titanate, and CNSL on the tribological properties of brake friction materials. Wear 264, 204–210 (2008)
G.J. Xian, Z. Zhang, Sliding wear of polyetherimide matrix composites: i influence of short carbon fibre reinforcement. Wear 258, 776–782 (2005)
J. Bijwe, R. Rattan, M. Fahim, Abrasive wear performance of carbon fabric reinforced polyetherimide composites: influence of content and orientation of fabric. Tribol. Int. 40, 844–854 (2007)
J.P. Davim, N. Marques, A.M. Baptista, Effect of carbon fibre reinforcement in the frictional behavior of peek in a water lubricated environment. Wear 251, 1100–1104 (2001)
G.Y. Xie, G.X. Sui, R. Yang, Effects of potassium titanate whiskers and carbon fibers on the wear behavior of polyetheretherketone composite under water lubricated condition. Compos. Sci. Technol. 71, 828–835 (2011)
A.I. Olabisi, A.N. Adam, O.M. Okechukwu, Development and assessment of composite brake pad using pulverized cocoa beans shells filler. Int. J. Mater. Sci. Appl. 5, 66–78 (2016)
Q.F. Guan, G.Y. Li, H.Y. Wang, J. An, Friction-wear characteristics of carbon fiber reinforced friction material. J. Mater. Sci. 39, 641–643 (2004)
D.Q. Cheng, X.T. Wang, J. Zhu, D.H. Qiu, X.W. Cheng, Q.F. Guan, Friction and wear behavior of carbon fiber reinforced brake materials. Front. Mater. Sci. Chin. 3, 56–60 (2009)
GB 5763-2008, Brake Linings for Automobiles (Standards Press of China, Beijing, 2008)
M.H. Cho, S.J. Kim, D. Kim, H. Jang, Effects of ingredients on tribological characteristics of a brake lining: an experimental case study. Wear 258, 1682–1687 (2005)
E. Rabinowicz, Friction and Wear of Materials, 2nd edn. (Wiley, New York, 1995)
D.H. Buckley, Surface Effect in Adhesion, Friction, Wear and Lubrication, Tribology Series 5 (Elsevier, Amsterdam, 1981)
L. Chang, Z. Zhang, Tribological properties of epoxy nanocomposites-part II-a combinative effect of short carbon fibre with nano-TiO2. Wear 260, 869–878 (2006)
K. Friedrich, Z. Zhang, A.K. Schlarb, Effects of various fillers on the sliding wear of polymer composites. Compos. Sci. Technol. 65, 2329–2343 (2005)
Z.Y. Jiang, L.A. Gyurova, A.K. Schlarb, K. Friedrich, Z. Zhang, Study on friction and wear behavior of polyphenylene sulfide composites reinforced by short carbon fibers and sub-micro TiO2 particles. Compos. Sci. Technol. 68, 734–742 (2008)
H. Zhang, Z. Zhang, K. Friedrich, Effect of fiber length on the wear resistance of short carbon fiber reinforced epoxy composites. Compos. Sci. Technol. 67, 222–230 (2007)
K. Friedrich, Z. Lu, A.M. Hager, Overview on polymer composites for friction and wear application. Theoret. Appl. Fract. Mech. 19, 1–11 (1993)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Wang, R., He, M., Huo, J., Fan, B., Liu, F. (2018). Effect of Fiber Content on Surface Performance of Potassium Titanate Whiskers and Carbon Fiber-Reinforced Phenolic Composites. In: Han, Y. (eds) Advances in Materials Processing. CMC 2017. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-13-0107-0_6
Download citation
DOI: https://doi.org/10.1007/978-981-13-0107-0_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-0106-3
Online ISBN: 978-981-13-0107-0
eBook Packages: EngineeringEngineering (R0)