Preparation and Numerical Simulation of Structural Parameters of Ni–Fe Bimetallic Porous Anode Support for Solid Oxide Fuel Cells

  • Xin Gu
  • Jie Yu
  • Wenhui Ma
  • Guoqiang Lv
  • Dingwen Kang
  • Guangjie Xie
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)

Abstract

Optimization of preparation conditions for Ni–Fe bimetallic porous anode-supported planar solid oxide fuel cells was carried out. Experimental and literature data were used to build a 3D model of an anode-supported solid oxide fuel cell. A parametric study was carried out to determine the influence of various design parameters on performance. Some operating variables, such as thickness and porosity, were changed to observe their effects on the cell performance. Increased thickness had an adverse influence on the performance of the cell, but an increase in porosity improved performance.

Keywords

Solid oxide fuel cells Chemical reaction Thickness Porosity 

Notes

Acknowledgements

The work was supported by the Science and Technology Project of Yunnan Province (No. 2016FB080), the National Natural Science Foundation of China (No. 51764028) and the Science and Technology Program of Yunnan Province (No. 2015RD016).

References

  1. 1.
    P.R. Shearing, Q. Cai, J.I. Golbert, Microstructural analysis of a solid oxide fuel cell anode using focused ion beam techniques coupled with electrochemical simulation. J. Power Sources 195, 4804–4810 (2010)CrossRefGoogle Scholar
  2. 2.
    H.J. Dong, H.N. Jin, C.J. Kim, Microstructural optimization of anode-supported solid oxide fuel cells by a comprehensive microscale model. J. Electrochem. Soc. 153, A406–A417 (2006)CrossRefGoogle Scholar
  3. 3.
    O. Vasylyev, M. Brychevskyi, Y. Brodnikovskyi, The structural optimization of ceramic fuel cells. Univ. J. Chem. 4, 31–54 (2016)CrossRefGoogle Scholar
  4. 4.
    T. Abdullah, L. Liu, Simulation-based microstructural optimization of solid oxide fuel cell for low temperature operation. Int. J. Hydrogen Energy 41, 13632–13643 (2016)CrossRefGoogle Scholar
  5. 5.
    W. Li, C. Xiong, Q. Zhang, Electrochim. Acta 190, 531–537 (2016)CrossRefGoogle Scholar
  6. 6.
    A.L. Jumlat, P. Sathish, Optimizing anode microstructure of intermediate temperature solid oxide fuel cell based on gadolinium doped ceria. Dev. Renew. Energy Technol. 1–4 (2014)Google Scholar
  7. 7.
    P. Costamagna, P. Costa, E. Arato, Some more considerations on the optimization of cermet solid oxide fuel cell electrodes. Electrochim. Acta 43, 967–972 (1998)CrossRefGoogle Scholar
  8. 8.
    D. Bhattacharyya, R. Rengaswamy, Transport, sensitivity, and dimensional optimization studies of a tubular Solid Oxide Fuel Cell. J. Power Sources 190, 499–510 (2009)CrossRefGoogle Scholar
  9. 9.
    D. Bhattacharyya, R. Rengaswamy, C.Y. Finnerty, Isothermal models for anode-supported tubular solid oxide fuel cells. Chem. Eng. Sci. 62, 4250–4267 (2007)CrossRefGoogle Scholar
  10. 10.
    J. Shi, X. Xue, Optimization design of electrodes for anode-supported solid oxide fuel cells via genetic algorithm. J. Electrochem. Soc. 158, B143–B151 (2010)CrossRefGoogle Scholar
  11. 11.
    J. Shi, X. Xue, Microstructure optimization designs for anode-supported planar solid oxide fuel cells. J. Fuel Cell Sci. Technol. 8, 061006 (2011)CrossRefGoogle Scholar
  12. 12.
    P. Aguiar, C.S. Adjiman, N.P. Brandon, Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance. J. Power Sources 138, 120–136 (2004)CrossRefGoogle Scholar
  13. 13.
    J.W. Kim, A.V. Virkar, K.Z. Fung, Polarization effects in intermediate temperature anode-supported solid oxide fuel cells. J. Electrochem. Soc. 146, 69–78 (1999)CrossRefGoogle Scholar
  14. 14.
    H.N. Jin, H.J. Dong, A comprehensive micro-scale model for transport and reaction in intermediate temperature solid oxide fuel cells. Electrochim. Acta 51, 3446–3460 (2006)CrossRefGoogle Scholar
  15. 15.
    B. Sunden, Analysis of chemically reacting transport phenomena in an anode duct of intermediate temperature SOFCs. J. Fuel Cell Sci. Technol. 3, 89–98 (2006)Google Scholar
  16. 16.
    J. Yuan, B. Sunden, Analysis of intermediate temperature solid oxide fuel cell transport processes and performances. J. Heat Transf. 127, 1380–1390 (2005)CrossRefGoogle Scholar
  17. 17.
    T. Ackmann, L.G.J.D. Haart, W. Lehnert, Modeling of mass and heat transport in plannar substrate type SOFCs. J. Electrochem. Soc. 150, A783–A789 (2003)CrossRefGoogle Scholar
  18. 18.
    W. Lehnert, J. Meusinger, F. Thom, Modelling of gas transport phenomena in SOFC anodes. J. Power Sources 87, 57–63 (2000)CrossRefGoogle Scholar
  19. 19.
    M.M. Hussain, X. Li, I. Dincer, J. Power Sources 189, 916–928 (2009)CrossRefGoogle Scholar
  20. 20.
    B. Todd, J.B. Young, Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling. J. Power Sources 110, 186–200 (2002)CrossRefGoogle Scholar
  21. 21.
    B.E. Poling, J.M. Prausnitz, J.P. O’Connell, The Properties of Gases and Liquids, fifth edn. (The McGraw-Hill Companies, New York, 2000)Google Scholar
  22. 22.
    J.M. Klein, Y. Bultel, S. Georges, Modeling of a SOFC fuelled by methane: from direct internal reforming to gradual internal reforming. Chem. Eng. Sci. 62, 1636–1649 (2007)CrossRefGoogle Scholar
  23. 23.
    K. Hou, R. Hughes, The kinetics of methane steam reforming over a Ni/α-Al2O catalyst. Chem. Eng. J. 82, 311–328 (2001)CrossRefGoogle Scholar
  24. 24.
    R. Suwanwarangkul, E. Croiset, E. Entchev, Experimental and modeling study of solid oxide fuel cell operating with syngas fuel. J. Power Sources 161, 308–322 (2006)CrossRefGoogle Scholar
  25. 25.
    R. Suwanwarangkul, E. Croiset, M.W. Fowler, Performance comparison of Fick’s Dusty-Gas and Stefan-Maxwell Models to predict the concentration overpotential of a SOFC anode. J. Power Sources 122, 9–18 (2003)CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Xin Gu
    • 1
  • Jie Yu
    • 1
  • Wenhui Ma
    • 1
    • 2
  • Guoqiang Lv
    • 1
    • 2
  • Dingwen Kang
    • 1
  • Guangjie Xie
    • 1
  1. 1.Faculty of Materials and Metallurgical EngineeringKunming University of Science and TechnologyKunmingChina
  2. 2.State Key Laboratory of Complex Nonferrous Metal Resources Cleaning Utilization in Yunnan Province, The National Engineering Laboratory for Vacuum MetallurgyKunmingChina

Personalised recommendations