Research on Construction Method of “Train-Traction Network” Harmonic Model for High-Speed Railway

Conference paper
Part of the Lecture Notes in Electrical Engineering book series (LNEE, volume 482)

Abstract

Network-side converter of high-speed train produces high harmonics in the modulation process, which are injected into traction network in the course of the operation which may cause resonance. In order to analyze the resonant characteristics of the traction drive system, it is necessary to construct the “train–traction network” harmonic model.

Keywords

Harmonic resonance High-speed train modeling Traction network modeling 

Notes

Acknowledgements

This work was supported by National Key R&D plan under Grant 2016YFB1200502-4 and 2017YFB1200802, Beijing Science and School level project 2016RC038.

References

  1. 1.
    Li HQ, Wang XR, Xu JJ (2014) Harmonic simulation analysis of traction power supply system based on train-network coupling system. 42(20):116–122 (in Chinese)Google Scholar
  2. 2.
    Yang Z, Liu Z (2011) Modelling and characteristic analysis of harmonic in high-speed railway traction network based on PSCAD/EMTDC platform. Power Sys Technol 35(5):70–75 (in Chinese)MathSciNetGoogle Scholar
  3. 3.
    Haitao HU, Zhengyou HE, Zhang M et al (2012) Series resonance analysis in high-speed railway all-parallel at traction power supply system. Proc CSEE 32(13):1371–1377 (in Chinese)Google Scholar
  4. 4.
    Cui H, Song W, Ge X et al (2016) High-frequency resonance suppression of high-speed railways in China. Iet Elect Sys Trans 6(2):88–95 (in Chinese)CrossRefGoogle Scholar
  5. 5.
    Lee H, Lee C, Jang G et al (2006) Harmonic analysis of the korean high-speed railway using the eight-port representation model. IEEE Trans Power Deliv 21(2):979–986CrossRefGoogle Scholar
  6. 6.
    Brenna M, Capasso A, Falvo MC et al (2011) Investigation of resonance phenomena in high speed railway supply systems: Theoretical and experimental analysis. Electr Power Syst Res 81(10):1915–1923CrossRefGoogle Scholar
  7. 7.
    Yuen KH, Pong MH, Lo WC, et al (1999) Modeling of electric railway vehicle for harmonic analysis of traction power-supply system using spline interpolation in frequency domain. In: Applied Power Electronics Conference and Exposition, 1999. Apec ‘99. Fourteenth. IEEE, vol 1, pp 458–463Google Scholar
  8. 8.
    Lee H, Lee C, Cho H et al (2004) Harmonic analysis model based on PSCAD/EMTDC for Korean high-speed railway. J Electrochem Soc 131(8):1773–1776Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  1. 1.CRRC Changchun Railway Vehicles CO., LTDChangchunChina
  2. 2.School of Electrical EngineeringBeijing Engineering Research Center of Electric Rail Transportation, Beijing Jiaotong UniversityBeijingChina

Personalised recommendations