Advertisement

The Built Environment and Energy Efficiency in Australia: Current State of Play and Where to Next

  • Trivess Moore
  • Sarah Holdsworth
Chapter
Part of the Green Energy and Technology book series (GREEN)

Abstract

This chapter provides a review and critique of the development and current status of approaches to improve energy efficiency and broader sustainability in the Australian built environment. The focus is on the minimum building performance requirements set through the National Construction Code—Building Code of Australia, but the chapter also includes other mandatory and voluntary approaches which have been introduced over the past two decades. The chapter concludes with a discussion that highlights current gaps that relate to the delivery of a low-carbon/low-energy built environment. It recognises that Australia currently fails to meet international building performance best practice standards, particularly in the residential sector, and this situation can only be reversed if various levels of government in Australia increase the regulated level of energy performance of buildings coupled with a more holistic and progressive inclusion of all energy consumed and generated within a building. This would be better aligned with improving actual impacts a building has over its lifecycle and on the community at large.

References

  1. 1.
    ABCB (2016) NCC volume two energy efficiency provisions 2016, 3rd edn. Australian Building Codes Board, CanberraGoogle Scholar
  2. 2.
    ABCB (2017a) About. Retrieved 12 Aug 2017, from http://www.abcb.gov.au/NCC/About
  3. 3.
    ABCB (2017b) Code compliance. Retrieved 12 Aug 2017, from http://www.abcb.gov.au/NCC/How-it-works/Code-Compliance
  4. 4.
    ASBEC (2016) Low carbon, high performance. How buildings can make a major contribution to Australia’s emissions and productivity goals. Australian Sustainable Built Environment Council, SydneyGoogle Scholar
  5. 5.
    Australian Government (2017) What is a BEEC? Retrieved 04 Sep 2017, from http://www.cbd.gov.au/get-and-use-a-rating/what-is-a-beec
  6. 6.
    Berry S (2014) The technical and economic feasibility of applying a net zero carbon standard for new housing. University of South AustraliaGoogle Scholar
  7. 7.
    Berry S, Davidson K (2016) Improving the economics of building energy code change: a review of the inputs and assumptions of economic models. Renew Sustain Energy Rev 58(Supplement C):157–166CrossRefGoogle Scholar
  8. 8.
    Berry S, Marker T (2015) Residential energy efficiency standards in Australia: where to next? Energ Effi 8(5):963–974CrossRefGoogle Scholar
  9. 9.
    BZE (2013) Zero carbon Australia: buildings plan. Beyond Zero Emissions, Melbourne Energy Institute, University of Melbourne, MelbourneGoogle Scholar
  10. 10.
    Carbines E (2003) Live music taskforce: report and recommendations, December 2003. Department of Sustainability and Environment, Victorian Government, MelbourneGoogle Scholar
  11. 11.
    COAG (2009) National strategy on energy efficiency. Canberra, Council of Australian GovernmentsGoogle Scholar
  12. 12.
    DELWP (2017) Apartment design guidelines for Victoria. Department of Environment, Land, Water and Planning, MelbourneGoogle Scholar
  13. 13.
    DEWHA (2008) Energy efficiency rating and house price in the ACT. Department of the Environment Water Heritage and the Arts, CanberraGoogle Scholar
  14. 14.
    Foliente GC (2000) Developments in performance-based building codes and standards. For Prod J 50(7/8):12–21Google Scholar
  15. 15.
    GBCA (2017a) Green Star. Retrieved 04 Sep 2017, from http://new.gbca.org.au/green-star/
  16. 16.
    GBCA (2017b) Green star project directory. Retrieved 04 Sep 2017, from http://www.gbca.org.au/project-directory.asp
  17. 17.
    Golubchikov O, Deda P (2012) Governance, technology, and equity: an integrated policy framework for energy efficient housing. Energy Policy 41:733–741CrossRefGoogle Scholar
  18. 18.
    Greene D, Pears A (2003) Policy options for energy efficiency in Australia. Melbourne, ACRE and The Australian CRC for Renewable Energy Policy GroupGoogle Scholar
  19. 19.
    Gross JG (1996) Developments in the application of the performance concept in building. In: 3rd CIB-ASTM-ISO-RILEM international symposium, Haifa, Israel, National Building Research InstituteGoogle Scholar
  20. 20.
    HIA (2009) Response to the consultation regulation impact statement 2009-03. Proposal to revise the energy efficiency requirements of the BCA for residential buildings. Housing Industry Association, Campbell, ACTGoogle Scholar
  21. 21.
    Kordjamshidi M (2011) House rating schemes from energy to comfort base. Springer, BerlinCrossRefGoogle Scholar
  22. 22.
    MA (2005) Ecosystem and human well-being: opportunities and challenges for business and industry—the fourth Millennium Ecosystem Assessment report. Millennium Ecosystem AssessmentGoogle Scholar
  23. 23.
    MBAV (2008) Submission to the liveability inquiry. Victorian competition and efficiency commission, February 2008. Master Builders Association of Victoria, MelbourneGoogle Scholar
  24. 24.
    MEFL (2017) Changes associated with efficient dwellings project—Final report Melbourne, Prepared by Moreland energy foundation in association with strategic, policy and research. WTP partnership and building environmental assessment company on behalf of the department of the environment and energyGoogle Scholar
  25. 25.
    Moore T (2012) Facilitating a transition to zero emission new housing in Australia: costs, benefits and direction for policy. RMIT UniversityGoogle Scholar
  26. 26.
    Moore T, de Haan F, Horne R, Gleeson B (2018) Urban sustainability transitions. Australian cases—international perspectives. Springer, SingaporeGoogle Scholar
  27. 27.
    Moore T, Horne R, Morrissey J (2014) Zero emission housing: policy development in Australia and comparisons with the EU, UK, USA and California. Environ Innov Societal Transitions 11:25–45CrossRefGoogle Scholar
  28. 28.
    Moore T, Moloney S, Hurley J, Doyon A (2017) Implementing sustainability in the built environment. An analysis of the role and effectiveness of the building and planning system in delivering sustainable cities. RMIT University, MelbourneGoogle Scholar
  29. 29.
    Moore T, Morrissey J (2014) Lifecycle costing sensitivities for zero energy housing in Melbourne, Australia. Energy Build 79:1–11CrossRefGoogle Scholar
  30. 30.
    Moore T, Strengers Y, Maller C (2016) Utilising mixed methods research to inform low-carbon social housing performance policy. Urban Policy and Res 34(3):240–255CrossRefGoogle Scholar
  31. 31.
    NatHERS (2017) Nationwide House Energy Rating Scheme (NatHERS). Retrieved 12 Aug 2017, from http://www.nathers.gov.au/
  32. 32.
    Newton P, Newman P (2013) Low carbon green growth: tracking progress in Australia’s built environment industry towards a green economy. Swinburne University of Technology and Curtin University, MelbourneGoogle Scholar
  33. 33.
  34. 34.
  35. 35.
    OECD (2003) Environmentally sustainable buildings: challenges and policies. OECD Publishing, ParisGoogle Scholar
  36. 36.
    Porritt J (2007) Capitalism as if the World matters. Earthscan, LondonGoogle Scholar
  37. 37.
    Price Waterhouse Cooper (2002) Innovation in the Australian building and construction industry. Report prepared for Australian building and construction industry. Forum and the Department of Industry, Tourism and ResourcesGoogle Scholar
  38. 38.
    Reed R (2008) The relationship between sustainability and housing value. In: 8th annual African real estate society conference. Johannesburg, South AfricaGoogle Scholar
  39. 39.
    Sustainability House (2012) Identifying cost savings through building redesign for achieving residential building energy efficiency standards. Prepared for the Department of Climate Change & Energy Efficiency, CanberraGoogle Scholar
  40. 40.
    The Climate Institute (2015) Factsheet: Australia’s emissions: what do the numbers really mean? The Climate InstituteGoogle Scholar
  41. 41.
    United Nations (2015) Framework convention on climate change. Adoption of the Paris agreement, 21st conference of the parties. United Nations, ParisGoogle Scholar
  42. 42.
    VBA (2017) Legislation. Retrieved 04 Sep 2017, from http://www.vba.vic.gov.au/practitioners/legislation
  43. 43.
    Wang X, Chen D, Ren Z (2010) Assessment of climate change impact on residential building heating and cooling energy requirement in Australia. Build Environ 45(7):1663–1682CrossRefGoogle Scholar
  44. 44.
    Wells W, Bardacke T, Cepe P, Seal Cramer J, McManigal Delaney L, Landman M (2007) Blueprint for greening affordable housing. Island Press, WashingtonGoogle Scholar
  45. 45.
    Willand N, Ridley I, Maller C (2015) Towards explaining the health impacts of residential energy efficiency interventions—a realist review. part 1: pathways. Soc Sci Med 133:191–201CrossRefGoogle Scholar
  46. 46.
    Williams J, Mitchell R, Raicic V, Vellei M, Mustard G, Wismayer A, Yin X, Davey S, Shakil M, Yang Y, Parkin A, Coley D (2016) Less is more: a review of low energy standards and the urgent need for an international universal zero energy standard. J Build Eng 6(Supplement C):65–74CrossRefGoogle Scholar
  47. 47.
    Williamson T, Grant E, Hansen A, Pisaniello D, Andamon M (2009) An investigation of potential health benefits from increasing energy efficiency stringency requirements. Building code of Australia volumes one and two. The University of Adelaide, AdelaideGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.Sustainable Building Innovation Laboratory, School of Property Construction and Project ManagementRMIT UniversityMelbourneAustralia

Personalised recommendations