Advertisement

Evaluation and Prediction of Well Pattern Adjustment Effect of Gaotaizi Reservoir in Sazhong Development Area

  • Jicheng Zhang
  • Jun Zhang
  • Bingyu Lv
Conference paper
Part of the Springer Series in Geomechanics and Geoengineering book series (SSGG)

Abstract

After more than 30 years water flooding development, Gaotaizi reservoir in Mid-east Block of Sazhong development area has entered the high water cut stage. Many problems are exposed in the process of development with the extension of development time. It is necessary to adjust the well pattern and evaluate the effect of well pattern adjustment. This paper studies the development effects from many aspects after well infilling of Gaotaizi reservoir. In addition, the numerical simulation method is used to predict the oil field production capacity in the future, so as to provide a useful reference for future oil field production. After well optimization and adjustment, the annual oil production and the degree of water flooding reserves production have increased in varying degrees. By numerical simulation, it is expected that the recovery level can be improved by 2.98%, and the recoverable reserves will be increased by 108.98 × 104t by 2025. The research findings of this paper have important guiding significance and application value for the development and production of similar high water cut oil fields.

Keywords

Well pattern adjustment High water cut stage Development effect Enhanced oil recovery Numerical simulation 

Notes

Acknowledgements

This research is supported by National Science and Technology Major Project of the Ministry of Science and Technology of China (Grant No. 2016ZX05015-002).

References

  1. 1.
    Zhang S, Liu Z, Wan H et al (2005) Technical limits for pattern rearrangement in the late period of high water-cut in an uncompartmentalized oilfield. Spec Oil Gas Reserv 12(2):57–62Google Scholar
  2. 2.
    Zhang H, Liu Q (1997) Variations of petrophysical parameters after sandstone reservoirs watered out in Daqing oilfield. SPE Adv Technol Ser 5(1):128–139Google Scholar
  3. 3.
    Wang S, Niu S (2004) Layer subdivision in the late high water cut stage in the complex fault block reservoirs. Pet Explor Dev 31(3):116–118Google Scholar
  4. 4.
    Liu H (2004) Separate layer production and water injection technology developed in Daqing oil field. Zhong Guo You Qi TE357, 62:36–37Google Scholar
  5. 5.
    Yuan Aiwu J (2005) Oilfield injection-production ratio prediction by artificial neural network. Oil Prod Eng 24:2Google Scholar
  6. 6.
    Shi C, Du Q, Zhu L et al (2006) Research on remaining oil distribution and further development methods for different kinds of oil layers in Daqing oilfield at high water-cut stage. In: SPE Asia Pacific oil & gas conference and exhibition, 11–13 Sept, AdelaideGoogle Scholar
  7. 7.
    Bao J, Song X, Ye J et al (2010) Recombination of layer series of development in a high water-cut oil field. Xinjiang Pet Geol 31(3):291–294Google Scholar
  8. 8.
    Cui C, Zhao X (2004) A numerical reservoir simulation study with the variety of reservoir parameters. J Hydrodyn 19(A):912–915Google Scholar
  9. 9.
    Wang Z, Liu X (2005) Quantitative evaluation method for injection-production adaptability of oil field in later high water cut stage and adjustment solution. Fault-Block Oil Gas Field 24:06Google Scholar
  10. 10.
    Bokhari K, Islam MR (2005) Improvement in the time accuracy of numerical methods in petroleum engineering problems: a new combination. Energy Sources 27(1–2):45–60CrossRefGoogle Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2019

Authors and Affiliations

  1. 1.College of Petroleum EngineeringNortheast Petroleum UniversityDaqingChina

Personalised recommendations