Hardware Implementation of Solar Assisted Automatic Curtain Control System

  • Prateek Singh
  • Yogesh K. Chauhan
  • Rajesh Singh
  • Rupendra Pachauri
Conference paper
Part of the Advances in Intelligent Systems and Computing book series (AISC, volume 624)

Abstract

An innovative effort on hardware design of an automatic curtain control system powered by solar PV array. To achieve the objective, a constant voltage controller (CVC) type maximum power point tracking (MPPT) method for PV system is implemented with a DC to DC boost converter circuit to fond maximum power. Also, a motor controller unit is implemented to control the motor run time used in this system. The proposed system circuits which include CVC-MPPT circuit boost converter and motor control unit have been designed using Proteus environment. The closing and opening of curtain has been tested under different light intensity level. The performance analysis of entire system is observed acceptable.

Keywords

Curtain control CVC MPPT DC–DC boost converter Solar PV array 

References

  1. 1.
    Pachauri, R. K., Chauhan, Y. K., Assessment of Wind Energy Technology Potential in Indian Context. International Journal of Renewable Energy and Research, 2(2012) 773–780.Google Scholar
  2. 2.
    Gupta, A. Kumar, P. Pachauri, R. K., Chauhan, Y. K. Effect of Environmental Conditions on Single and Double Diode PV System: A Comparative Study. International Journal of Renewable Energy and Research, 4(2014), 849–858.Google Scholar
  3. 3.
    Noman, A. M., Addoweesh, K. E., Mashaly, H. M., Simulation and dSPACE Hardware Implementation of the MPPT Techniques using Buck Boost Converter. in Proc. IEEE Conference on AFRICON, (2013), 1–9.Google Scholar
  4. 4.
    Satya, P., Natarajan, R. Design and Implementation of 12 V/24 V Closed Loop Boost Converter for Solar Powered LED Lightning System. International Journal of Electrical and Technology, 5(2013), 254–264.Google Scholar
  5. 5.
    Ahmed, K. T., Datta, M., Mohammad, N. A Novel Two Switch Non-Inverting Buck-Boost Converter Based Maximum Power Point Tracking System. International Journal of Electrical and Computer Engineering 3(2013), 467–477.Google Scholar
  6. 6.
    Leedy, A.W., Liping, G, Aganah, K. A. A Constant Voltage MPPT Method for a Solar Powered Boost Converter with DC Motor Load. in Proc. IEEE Conference on Southeastcon at Orlando (2012), 1– 6.Google Scholar
  7. 7.
    Swamy, C.L.P. Experimental Investigations on a Permanent Magnet Brushless DC Motor Fed by PV Array for Water Pumping System. in Proc. IEEE Conference on Energy Conversion Engineering (1996), 1663–1668.Google Scholar
  8. 8.
    Ponniran, A., Said, A.F.M. DC-DC Boost Converter Design for Solar Electric System. in Proc. International Conference on Instrumentation, Control & Automation at Bandung (2009), 210–214.Google Scholar
  9. 9.
    Xiaoqing, L., Xiaoyan, L., Lijun, L. Study on the Application of Solar Technology in Oilfield Multi-Purpose Station. in Proc. IEEE Conference on Energy and Environment Technology (2009) 369–372.Google Scholar
  10. 10.
    Zanesco, et al.. Development of a PV System as a Way to Promote the Technology. in Proc. IEEE Conference on Photovoltaic Specialists, (2012), 526–530.Google Scholar
  11. 11.
    Dutter, M., et al. Low-cost Thin-Film Deposition Apparatus for Solar Applications. in Proc. IEEE Conference on Systems and Information Engineering Design Symposium (2014), 135–140.Google Scholar
  12. 12.
    Harvey, E. C., Gower, M. C. Laser Cutting Thin Films for Solar Panels. in Proc. IEEE Conference on Compact Power Sources (1996), 1–5.Google Scholar
  13. 13.
    Lanier, W. R., Fuschillo, N., Eggleston, F.K., Flat Plate Thermoelectric Solar Cells: Manufacturing Process and Life Testing. IEEE Transactions on Aerospace and Electronic Systems, (2008), 16–25.Google Scholar

Copyright information

© Springer Nature Singapore Pte Ltd. 2018

Authors and Affiliations

  • Prateek Singh
    • 1
  • Yogesh K. Chauhan
    • 1
  • Rajesh Singh
    • 2
  • Rupendra Pachauri
    • 2
  1. 1.Electrical Engineering Department, School of EngineeringGautam Buddha UniversityGreater NoidaIndia
  2. 2.Electronics Instrumentation and Control Engineering Department, College of Engineering StudiesUniversity of Petroleum and Energy StudiesDehradunIndia

Personalised recommendations