Abstract
This paper presents the development of a biocompatible polymer nano-composite material for the additive manufacturing (AM) process. The material was prepared by the mechanical of polycaprolactone (PCL), montmorillonite (MMT) and hydroxyapatite (HA) using a single screw extruder nanomixer. The amount of MMT material varied from 2 to 4 (wt%) and the HA was fixed at 10 (wt%). Then, the blended material was crushed and fed into a single a screw extruder to produce a filament of 1.8 mm in diameter. The material was characterized on mechanical properties, biocompatibility and manufacturability a fused deposition modeling machine. The results show an improvement in tensile and flexural properties by increasing the MMT. The SEM image shows the bulk formation of apatite layers on the composite surface which confirmed the bioactivity of the material. The material also was successfully produced on the Fused Deposition Modeling for rapid production such as implant components.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Streicher, R.M., Schmidt. M., Fiorito, S.: Nanosurfaces and nanostructures for artificial orthopedic implants. Nanomedicine (Lond.) 2(6), 861–74 (2007)
Justin, T., Jan, H.B.: FDM systems and local adaptive slicing. Mater. Des. 20, 77–82 (1999). doi:10.1016/S0261-3069(99)00012-6
Masood, S.H., Song, W.Q.: Development of new metal/polymer materials for rapid tooling using fused deposition modeling. Mater. Des. 25, 587–594 (2004)
Kokubo, T.: Apatite formation on surfaces of ceramics, metals and polymers in body environment. Acta Mater. 46(7), 2519–2527 (1998)
Chen, B., Sun, K.: Poly (3-caprolactone)/hydroxyapatite composites: effects of particle size, molecular weight distribution and irradiation on interfacial interaction and properties. J. Polymer Testing 24, 64–70 (2005)
Ramirez, C., Albano, C., Karam, A., Domingueical, N., Sanchez, Y., Gonzalez, G.: Mechanical, thermal, rheological and morphological behaviour of irradiated PP/HA composites. Nucl. Instrum. Methods Phys. Res. B. 236, 531–535 (2005)
Wang, M.: Developing bioactive composite materials for tissue replacement. Biomaterials 24, 2133–2151 (2003)
Fang, L., Gao, P., Leng, Y.: Processing of hydroxyapatite reinforced ultra high molecular weight polyethylene for biomedical applications. Biomaterials 26, 3471–3478 (2005)
Liu, Y., Wang, M.: Fabrication and characteristics of hydroxyapatite reinforced polypropylene as a bone analogue biomaterial. J. Appl. Polym. Sci. 106, 2780–2790 (2007)
Lim, K.L.K., Mohd Ishak, Z.A., Ishiaku, U.S., Fuad, A.M.Y., Yusof, A.H., Czigany, T., Pukanszky, B., Ogunniyi, D.S.: High-density polyethylene/ultrahigh-molecular-weight polyethylene blend. II. effect of HA on processing, thermal, and mechanical properties. J. Appl. Polym. Sci. 100, 3931–3942 (2006)
Gu, Y.W., Khor, K.A., Cheang, P.: In vitro studies of plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid (SBF). Biomaterials 24, 1603–1611 (2003)
Acknowledgements
This work was financially supported by the research fund (MDR 1312), Universiti Tun Hussein Onn Malaysia.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Singapore
About this chapter
Cite this chapter
Abdul Haq, R.H., Wahab, M.S., Wahid, M.U. (2016). Fused Deposition Modeling of PCL/HA/MMT Biocompatible Polymer Nano-composites. In: Öchsner, A., Altenbach, H. (eds) Machining, Joining and Modifications of Advanced Materials . Advanced Structured Materials, vol 61. Springer, Singapore. https://doi.org/10.1007/978-981-10-1082-8_3
Download citation
DOI: https://doi.org/10.1007/978-981-10-1082-8_3
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-1081-1
Online ISBN: 978-981-10-1082-8
eBook Packages: EngineeringEngineering (R0)