Implications and Applications

Chapter
First Online:
Part of the Springer Series in Surface Sciences book series (SSSUR, volume 60)

Abstract

Charge enhanced diffusion, which is a new discovery derived from the deposition behaviour of CNPs, will have a great scientific and technological impact.

Keywords

Spark Plasma Sinter Diamond Film Crystalline Silicon Silicon Film Film Quality 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access.

References

  1. Adikaari A, Silva S (2005) Thickness dependence of properties of excimer laser crystallized nano-polycrystalline silicon. J Appl Phys 97(11):114305. doi:http://dx.doi.org/10.1063/1.1898444
  2. Akedo J Aerosol deposition method for fabrication of nano crystal ceramic layer. In: Materials Science Forum, 2004. Trans Tech Publ, pp 43–48. doi:10.4028/www.scientific.net/MSF.449-452.43
  3. Akedo J (2006) Aerosol deposition of ceramic thick films at room temperature: Densification mechanism of ceramic layers. J Am Ceram Soc 89(6):1834–1839. doi: 10.1111/j.1551-2916.2006.01030.x
  4. Akedo J (2008) Room temperature impact consolidation (RTIC) of fine ceramic powder by aerosol deposition method and applications to microdevices. J Therm Spray Tech 17(2):181–198. doi: 10.1007/s11666-008-9163-7
  5. Bardotti L, Jensen P, Hoareau A, Treilleux M, Cabaud B (1995) Experimental observation of fast diffusion of large antimony clusters on graphite surfaces. Phys Rev Lett 74(23):4694–4697Google Scholar
  6. Barnes MC, Jeon I-D, Kim D-Y, Hwang NM (2002) Generation of charged clusters during thermal evaporation of gold. J Cryst Growth 242(3–4):455–462. doi:http://dx.doi.org/10.1016/S0022-0248(02)01417-3
  7. Baski A, Fuchs H (1994) Epitaxial growth of silver on mica as studied by AFM and STM. Surf Sci 313(3):275–288Google Scholar
  8. Bertolino N, Garay J, Anselmi-Tamburini U, Munir Z (2001) Electromigration effects in Al-Au multilayers. Scripta Mater 44(5):737–742Google Scholar
  9. Bertolino N, Garay J, Anselmi-Tamburini U, Munir Z (2002) High-flux current effects in interfacial reactions in Au–Al multilayers. Philos Mag B 82(8):969–985Google Scholar
  10. Buchholz S, Fuchs H, Rabe JP (1991) Surface structure of thin metallic films on mica as seen by scanning tunneling microscopy, scanning electron microscopy, and low‐energy electron diffraction. J Vac Sci Technol B 9(2):857–861Google Scholar
  11. Bunshah RF (1983) Processes of the activated reactive evaporation type and their tribological applications. Thin Solid Films 107(1):21–38. doi:http://dx.doi.org/10.1016/0040-6090(83)90004-4
  12. Bustin WM, Dukek WG (1983) Electrostatic hazards in the petroleum industry. John Wiley and Sons, New York, USAGoogle Scholar
  13. Chapman B (1980) Sputtering Chapter 6. Glow discharge process:201Google Scholar
  14. Chidsey CE, Loiacono DN, Sleator T, Nakahara S (1988) STM study of the surface morphology of gold on mica. Surf Sci 200(1):45–66Google Scholar
  15. Chung Y-B, Park H-K, Lee D-K, Jo W, Song J-H, Lee S-H, Hwang N-M (2011) Low temperature deposition of crystalline silicon on glass by hot wire chemical vapor deposition. J Cryst Growth 327(1):57–62. doi:http://dx.doi.org/10.1016/j.jcrysgro.2011.05.004
  16. Chung Y-B, Lee S-H, Bae S-H, Park H-K, Jung J-S, Hwang N-M (2012) Effect of the initial structure on the electrical property of crystalline silicon films deposited on glass by hot-wire chemical vapor deposition. J Nanosci Nanotechno 12(7):5947–5951. doi:http://dx.doi.org/10.1166/jnn.2012.6415
  17. Crane J, Warwick M, Smith R, Furlan N, Binions R (2011) The application of electric fields to aerosol assisted chemical vapor deposition reactions. J Electrochem Soc 158(2):D62–D67Google Scholar
  18. DeRose J, Thundat T, Nagahara L, Lindsay S (1991) Gold grown epitaxially on mica: conditions for large area flat faces. Surf Sci 256(1):102–108Google Scholar
  19. Fuchita E, Tokizaki E, Ozawa E, Inoue H, Sakka Y, Kita E (2013) High-temperature phase in zirconia film fabricated by aerosol gas deposition and its change upon subsequent heat treatment. J Ceram Soc Jpn 121(1412):333–337. doi: 10.2109/jcersj2.121.333
  20. Garay J, Anselmi-Tamburini U, Munir ZA (2003) Enhanced growth of intermetallic phases in the Ni–Ti system by current effects. Acta Mater 51(15):4487–4495Google Scholar
  21. Holland TB, Löffler JF, Munir ZA (2004) Crystallization of metallic glasses under the influence of high density dc currents. J Appl Phys 95(5):2896–2899Google Scholar
  22. Hui S, Wang Z-J, Gao T-J (2007) Effect of high density electropulsing treatment on formability of TC4 titanium alloy sheet. T Nonferr Metal Soc 17(1):87–92Google Scholar
  23. Hwang NM (1999) Deposition and simultaneous etching of Si in the chemical vapor deposition (CVD) process: approach by the charged cluster model. J Cryst Growth 205(1–2):59–63. doi:http://dx.doi.org/10.1016/S0022-0248(99)00247-X
  24. Hwang J, Dubson M (1992) Atomically flat gold films grown on hot glass. J Appl Phys 72(5):1852–1857Google Scholar
  25. Hayashi C Gas deposition. In: Materials Science Forum, 1997. Trans Tech Publ, pp 153–180. doi:10.4028/www.scientific.net/MSF.246.153
  26. Inukai J, Mizutani W, Saito K, Shimizu H, Iwasawa Y (1991) Gold substrates for scanning tunneling microscopy of adsorbed species. Jpn J Appl Phys 30(12R):3496Google Scholar
  27. Jaworek A (2007) Electrospray droplet sources for thin film deposition. J Mater Sci 42(1):266–297. doi: 10.1007/s10853-006-0842-9
  28. Jaworek A, Sobczyk A, Krupa A, Lackowski M, Czech T (2009) Electrostatic deposition of nanothin films on metal substrate. Bull Pol Acad Sci-te 57(1):63–70. doi: 10.2478/v10175-010-0106-3
  29. Jeon I-D, Barnes MC, Kim D-Y, Hwang NM (2003) Origin of positive charging of nanometer-sized clusters generated during thermal evaporation of copper. J Cryst Growth 247(3–4):623–630. doi: 10.1016/S0022-0248(02)02058-4
  30. Jeon I-D, Kim D-Y, Hwang N-M (2005) Spontaneous generation of charged atoms or clusters during thermal evaporation of silver: Dedicated to Professor Dr. Duk Yong Yoon on the occasion of his 65th birthday. Z Metallkd 96(2):186–190Google Scholar
  31. Jiang Y, Tang G, Shek C, Zhu Y (2009) Effect of electropulsing treatment on microstructure and tensile fracture behavior of aged Mg–9Al–1Zn alloy strip. Appl Phys A 97(3):607–615Google Scholar
  32. Jones AC, Hitchman ML (eds) (2009) Chemical vapour deposition: precursors, processes and applications. Royal Society of Chemistry, LondonGoogle Scholar
  33. Kashu S, Mihara Y (1995) Preparation of PZT Deposited films by using an aerosol jet printing system and their electrical properties. J Jpn Soc Powder Metall 42:314–317Google Scholar
  34. Kashu S, Fuchita E, Manabe T, Hayashi C (1984) Deposition of ultra fine particles using a gas jet. Jpn J Appl Phys 23(12A):L910–L912Google Scholar
  35. Katakuse I, Ichihara T, Fujita Y, Matsuo T, Sakurai T, Matsuda H (1985) Mass distributions of copper, silver and gold clusters and electronic shell structure. Int J Mass Spectrom 67(2):229–236. doi:http://dx.doi.org/10.1016/0168-1176(85)80021-5
  36. Katakuse I, Ichihara T, Fujita Y, Matsuo T, Sakurai T, Matsuda H (1986) Mass distributions of negative cluster ions of copper, silver, and gold. Int J Mass Spectrom 74(1):33–41. doi:http://dx.doi.org/10.1016/0168-1176(86)85021-2
  37. Kawakami Y, Seto T, Ozawa E (1999) Characteristics of ultrafine tungsten particles produced by Nd:YAG laser irradiation. Appl Phys A 69(1):S249–S252. doi: 10.1007/s003399900286
  38. Kim J-Y, Kim D-Y, Hwang N-M (2006) Spontaneous generation of negatively charged clusters and their deposition as crystalline films during hot-wire silicon chemical vapor deposition. Pure Appl Chem 78(9):1715–1722. doi:http://dx.doi.org/10.1351/pac199870040789
  39. Kim C-S, Youn W-K, Lee D-K, Seol K-S, Hwang N-M (2009) Low-temperature deposition of crystalline silicon nitride nanoparticles by hot-wire chemical vapor deposition. J Cryst Growth 311(15):3938–3942. doi:http://dx.doi.org/10.1016/j.jcrysgro.2009.05.035
  40. Koch R, Winau D, Führmann A, Rieder K (1992) Intrinsic stress of polycrystalline and epitaxial Ag, Cu and Au films on mica (001). Vacuum 43(5):521–523Google Scholar
  41. Lee S-H (2014) Microstructure control of silicon thin films through controlling charged nanoparticles generated during hot wire chemical vapor deposition. Ph.D Thesis Seoul National University, SeoulGoogle Scholar
  42. Lee BS, Barnes MC, Kim D-Y, Hwang NM (2002) Spontaneous generation of charged clusters of a few nanometers during thermal evaporation of copper. J Cryst Growth 234(2–3):599–602. doi:http://dx.doi.org/10.1016/S0022-0248(01)01747-X
  43. Lee S-S, Ko M-S, Kim C-S, Hwang N-M (2008) Gas phase nucleation of crystalline silicon and their role in low-temperature deposition of microcrystalline films during hot-wire chemical vapor deposition. J Cryst Growth 310(15):3659–3662. doi:http://dx.doi.org/10.1016/j.jcrysgro.2008.05.009
  44. Levlin M, Laakso A, Niemi H-M, Hautojärvi P (1997) Evaporation of gold thin films on mica: effect of evaporation parameters. Appl Surf Sci 115(1):31–38Google Scholar
  45. Li Y, Chen J, Ma J (2015) Properties of Cu2ZnSnS4 (CZTS) thin films prepared by plasma assisted co-evaporation. J Mater Sci: Mater Electron 26(9):6546–6551. doi: 10.1007/s10854-015-3251-5
  46. Marchand P, Hassan IA, Parkin IP, Carmalt CJ (2013) Aerosol-assisted delivery of precursors for chemical vapour deposition: expanding the scope of CVD for materials fabrication. Dalton Trans 42(26):9406–9422Google Scholar
  47. Mizubayashi H, Okuda S (1989) Structural relaxation induced by passing electric current in amorphous Cu50 Ti50 at low temperatures. Phys Rev B 40(11):8057Google Scholar
  48. Morimoto R, Izumi A, Masuda A, Matsumura H (2002) Low-resistivity phosphorus-doped polycrystalline silicon thin films formed by catalytic chemical vapor deposition and successive rapid thermal annealing. Jpn J Appl Phys 41(2R):501Google Scholar
  49. Munir Z, Anselmi-Tamburini U, Ohyanagi M (2006) The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method. J Mater Sci 41(3):763–777Google Scholar
  50. Munir ZA, Quach DV, Ohyanagi M (2011) Electric current activation of sintering: a review of the pulsed electric current sintering process. J Am Ceram Soc 94(1):1–19Google Scholar
  51. Orchard H, Greer A (2005) Electromigration effects on compound growth at interfaces. Appl Phys Lett 86(23):231906Google Scholar
  52. Panjawi N, Naik A, Warwick ME, Hyett G, Binions R (2012) The preparation of titanium dioxide gas sensors by the electric field assisted aerosol CVD reaction of titanium isopropoxide in toluene. Chem Vapor Depos 18(4‐6):102–106Google Scholar
  53. Peineke C, Schmidt-Ott A (2008) Explanation of charged nanoparticle production from hot surfaces. J Aerosol Sci 39(3):244–252. doi:http://dx.doi.org/10.1016/j.jaerosci.2007.12.004
  54. Peineke C, Attoui MB, Schmidt-Ott A (2006) Using a glowing wire generator for production of charged, uniformly sized nanoparticles at high concentrations. J Aerosol Sci 37(12):1651–1661. doi:http://dx.doi.org/10.1016/j.jaerosci.2006.06.006
  55. Poppa H, Heinemann K, Elliot AG (1971) Epitaxial orientation studies of gold on UHV-cleaved mica during early stages of nucleation and growth. J Vac Sci Technol 8(3):471–480Google Scholar
  56. Qin R, Samuel E, Bhowmik A (2011) Electropulse-induced cementite nanoparticle formation in deformed pearlitic steels. J Mater Sci 46(9):2838–2842Google Scholar
  57. Rath JK, Stannowski B, van Veenendaal PATT, van Veen MK, Schropp REI (2001) Application of hot-wire chemical vapor-deposited Si:H films in thin film transistors and solar cells. Thin Solid Films 395(1–2):320–329. doi:http://dx.doi.org/10.1016/S0040-6090(01)01288-3
  58. Samuel EI, Bhowmik A, Qin R (2010) Accelerated spheroidization induced by high intensity electric pulse in a severely deformed eutectoid steel. J Mater Res 25(06):1020–1024Google Scholar
  59. SchÜTz R, Hartnagel HL (1989) Brief communication. New molecular beam epitaxy technique: radiofrequency plasma-assisted evaporation epitaxy for low temperature InP growth. Int J Electron 67(2):233–234. doi: 10.1080/00207218908921074
  60. Shaw G, Parkin IP, Pratt KF, Williams DE (2005) Control of semiconducting oxide gas-sensor microstructure by application of an electric field during aerosol-assisted chemical vapour deposition. J Mater Chem 15(1):149–154Google Scholar
  61. Shen Z, Peng H, Nygren M (2003) Formidable increase in the superplasticity of ceramics in the presence of an electric field. Adv Mater 15(12):1006–1009Google Scholar
  62. Spear KE, Dismukes JP (eds) (1994) Synthetic diamond: emerging CVD science and technology, vol 25. John Wiley & Sons, Hoboken, New JerseyGoogle Scholar
  63. Takagi T (1986) Ionized cluster beam technique for thin film deposition. Z Phys D Atom Mol Cl 3(2):271–278. doi: 10.1007/BF01384816
  64. Takagi T, Yamada I, Yanagawa K (1975) Ion Implantation in Semiconductors. Springer, US. doi: 10.1007/978-1-4684-2151-4
  65. Takagi T, Yamada I, Sasaki A (1976) An evaluation of metal and semiconductor films formed by ionized-cluster beam deposition. Thin Solid Films 39:207–217. doi:http://dx.doi.org/10.1016/0040-6090(76)90638-6
  66. Yang D, Conrad H (2001) Exploratory study into the effects of an electric field and of high current density electropulsing on the plastic deformation of TiAl. Intermetallics 9(10):943–947Google Scholar
  67. Zhao J, Garay JE, Anselmi-Tamburini U, Munir ZA (2007) Directional electromigration-enhanced interdiffususion in the Cu–Ni system. J Appl Phys 102(11):114902Google Scholar
  68. Zhou YZ, Zhang W, Guo J, He G (2004) Diffusive phase transformation in a Cu–Zn alloy under rapid heating by electropulsing. Phil Mag Lett 84(5):341–348Google Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2016

Authors and Affiliations

  1. 1.Material Science and EngineeringSeoul National UniversitySeoulKorea (Republic of)

Personalised recommendations