Crack-Like Reservoir in Homogeneous and Inhomogeneous HDR

  • Hiroyuki Abé
  • Hideki Sekine
Conference paper
Part of the Mechanics of elastic and inelastic solids book series (MEIS, volume 5)

Abstract

By circulating fluid through crack-like reservoirs created by hydraulic fracturing, an abundant amount of geothermal energy could be extracted from hot dry rocks. In the development of geothermal energy of this type, there is an obvious need to design and control the crack-like reservoirs in the earth’s crust. This paper is concerned with two subjects, i.e., the characteristic of a crack-like reservoir and the behavior of a crack-like reservoir due to extraction of geothermal energy. The former subject includes the limit for the size of two-dimensional crack-like reservoirs, the intersection of a two-dimensional reservoir with a joint, and the stability of a penny-shaped reservoir.

Keywords

Fracture Toughness Stress Intensity Factor Hydraulic Fracture Geophysical Research Tectonic Stress 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Abé, H., Mura, T., and Keer, L. M., “Growth Rate of a Penny-Shaped Crack in Hydraulic Fracturing of Rocks,” Journal of Geophysical Research, Vol. 81, No. 29, Oct. 1976, pp. 5335–5340.ADSCrossRefGoogle Scholar
  2. 2.
    Abé, H., Keer, L. M., and Mura, T., “Growth Rate of a Penny-Shaped Crack in Hydraulic Fracturing of Rocks, 2,” Journal of Geophysical Research, Vol. 81, No. 35, Dec. 1976, pp. 6292–6298.ADSCrossRefGoogle Scholar
  3. 3.
    Weertman, J., and Chang, S. P., “Fluid Flow Through a Large Vertical Crack in the Earth’s Crust,” Journal of Geophysical Research, Vol. 82, No. 5, Feb. 1977, pp. 929–932.ADSCrossRefGoogle Scholar
  4. 4.
    Weertman, J., “Theory of Water-Filled Crevasses in Glaciers Applied to Vertical Magma Transport Beneath Oceanic Ridges,” Journal of Geophysical Research, Vol. 76, No. 5, Feb. 1971, pp. 1171–1183.ADSCrossRefGoogle Scholar
  5. 5.
    Secor, D. T., Jr., and Pollard, D. D., “On the Stability of Open Hydraulic Fractures in the Earth’s Crust,” Geophysical Research Letters, Vol. 2, No. 11, Nov. 1975, pp. 510–513.ADSCrossRefGoogle Scholar
  6. 6.
    Pollard, D. D., and Muller, O. H., “The Effect of Gradients in Regional Stress and Magma Pressure on the Form of Sheet Intrusions in Cross Section,” Journal of Geophysical Research, Vol. 81, No. 5, Feb. 1976, pp. 975–984.ADSCrossRefGoogle Scholar
  7. 7.
    Pollard, D. D., “On the Form and Stability of Open Hydraulic Fractures in the Earth’s Crust,” Geophysical Research Letters, Vol. 3, No. 9, Sep. 1976, pp. 513–516.ADSCrossRefGoogle Scholar
  8. 8.
    Weertman, J., “The Stopping of a Rising, Liquid-Filled Crack in the Earth’s Crust by a Freely Slipping Horizontal Joint,” Journal of Geophysical Research, Vol. 85, No. B2, Feb. 1980, pp. 967–976.ADSCrossRefGoogle Scholar
  9. 9.
    Keer, L. M., and Chen, S. H., “The Intersection of a Pressurized Crack With a Joint,” Journal of Geophysical Research, Vol. 86, No. B2, Feb. 1981, pp. 1032–1038.ADSCrossRefGoogle Scholar
  10. 10.
    Hsu, Y. C., and Santosa, F., “The Stability of a Large Open Hydraulic Penny-Shaped Fracture (Crack) Near the Earth’s Surface,” Report ME-89(78)LASL-494-1, Los Alamos Scientific Laboratory, 1978.Google Scholar
  11. 11.
    Gringarten, A. C., Witherspoon, P. A., and Ohnishi, Y., “Theory of Heat Extraction From Fractured Hot Dry Rock,” Journal of Geophysical Research, Vol. 80, No. 8, Mar. 1975, pp. 1120–1124.ADSCrossRefGoogle Scholar
  12. 12.
    Lowell, R. P., “Comments on ‘Theory of Heat Extraction From Fractured Hot Dry Rock’ by A. C. Gringarten, P. A. Witherspoon, and Y. Ohnishi,” Journal of Geophysical Research, Vol. 81, No. 2, Jan. 1976, p. 359.ADSCrossRefGoogle Scholar
  13. 13.
    Wunder, R., and Murphy, H., “Thermal Drawdown and Recovery of Singly and Multiply Fractured Hot Dry Rock Reservoirs,” Report LA-7219-MS, Los Alamos Scientific Laboratory, 1978.CrossRefGoogle Scholar
  14. 14.
    Abé, H., Keer, L. M., and Mura, T., “Theoretical Study of Hydrau-lically Fractured Penny-Shaped Cracks in Hot, Dry Rocks,” International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 3, No. 1, Jan.–Mar. 1979, pp. 79–96.ADSMATHCrossRefGoogle Scholar
  15. 15.
    Sekine, H., and Mura, T., “Characterization of a Penny-Shaped Reservoir in a Hot Dry Rock,” Journal of Geophysical Research, Vol. 85, No. B7, Jul. 1980, pp. 3811–3816.ADSCrossRefGoogle Scholar
  16. 16.
    Abé, H., Sekine, H., Ishino, T., and Kamata, Y., “On the Limit for the Size of Hydraulic Fractures Near the Earth’s Surface,” International Journal of Fracture, Vol. 18, No. 2, Feb. 1982, pp. R17–R21.CrossRefGoogle Scholar
  17. 17.
    Erdogan, F., and Sih, G. C., “On the Crack Extension in Plates Under Plane Loading and Transverse Shear,” Transactions of the ASME, Journal of Basic Engineering, Vol. 85, No. 4, Dec. 1963, pp. 519–527.Google Scholar
  18. 18.
    Arima, S., “Fracture Mechanics Study on the Stability of a Branched Crack in the Earth’s Crust,” M. Eng. Thesis, Tohoku University, 1982.Google Scholar
  19. 19.
    Hayashi, K., and Abé, H., “Opening of a Fault and Resulting Slip Due to Injection of Fluid for the Extraction of Geothermal Heat,” Journal- of Geophysical Research, Vol. 87, No. B2, Feb. 1982, pp. 1049–1054.ADSCrossRefGoogle Scholar
  20. 20.
    Abé, H., Sekine, H., and Kitada, S., “Stability of a Penny-Shaped Geothermal Reservoir in the Earth’s Crust,” Transactions of the ASME, Journal of Energy Resources Technology, Vol. 104, No. 2, Jun. 1982, pp. 93–95.CrossRefGoogle Scholar
  21. 21.
    Abé, H., Sekine, H., and Shibuya, Y., “Thermoelastic Evaluation of a Two-Dimensional Crack for Extraction of Geothermal Energy,” Transactions of the Japan Society of Mechanical Engineers, Vol. 48, No. 431, Jul. 1982, pp. 899–903 (in Japanese).CrossRefGoogle Scholar

Copyright information

© Martinus Nijhoff Publishers, The Hague 1983

Authors and Affiliations

  • Hiroyuki Abé
    • 1
    • 2
  • Hideki Sekine
    • 1
    • 2
  1. 1.Department of Mechanical EngineeringTohoku UniversitySendaiJapan
  2. 2.Department of Engineering ScienceTohoku UniversitySendaiJapan

Personalised recommendations