Polyphosphate Nanoparticles and Gels

From macroscopic monolyths to nanoparticles
  • F. Galembeck
  • E. C. O. Lima
  • M. M. Beppu
  • R. M. Sassaki
  • N. C. Masson
  • V. A. R. Monteiro
  • E. F. Souza
Part of the NATO ASI Series book series (ASHT, volume 12)

Abstract

Amorphous metal (Al, Ca, Fe, Zr) polyphosphate particles and monolyths may be obtained in a range of chemical compositions, by admixture of aqueous solutions of sodium polyphosphate, metal salts and ammonium hydroxide.

In the Al-polyphosphate system, phosphate-rich solids (P/A1>1.5) are soft glasses, which contain sodium ions, too. Aluminum-rich particles are refractory and have a low electrical conductivity up to 800–1000°C, which is assigned to a restrained ion mobility.

Two different, macroscopically opposite behaviors are also observed in the preparation of these materials: in one case, monolythic gels are obtained, and these are easily dried into glasses. In the other case, nanoparticles are formed.

Most reports on nanoparticles preparation in the literature use kinetic control to limit particle size. This is the case of the well-known Szigmondy colloidal gold particles, as well as the recent reports on nanoparticle synthesis using aerosols and templates. In the present case, the nanoparticles are obtained under dynamic quasi-equilibrium dissolution-precipitation conditions, in the presence of excess reagents in the aqueous medium. For this reason, we propose that their small size is due to a low interfacial tension, as e.g. in microemulsions.

This assumption is strengthened by the observation of thermoreversible gel formation, from aluminum polyphosphate solutions: a thermoreversible gel is the result of the reversible formation of a highly solvated supramolecular network, in which interfacial tension between different domains is necessarily low and does not contribute a significant driving force for further phase seggregation.

Aluminum polyphosphate powders containing nanoparticles can be cold-pressed into translucent, low-porosity and mechanically resistant macroscopic solid discs and tubes. This attractive property is assigned to two factors: the particle nanodimensions and the large water content of the powders. Together, these may open a new path towards low temperature materials processing.

Keywords

Interfacial Tension Nanoparticles Preparation Aluminum Phosphate Particle Coalescence Microscope Grid 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Schrödter,K., Bettermann, G., Staffel, T. and Hofmann, T. (1991) Phosphoric acid and phosphates, in B. Barbara, S. Hawkins, G. Schulz (eds.), Ullmann’s Encyclopedia of Industrial Chemistry, VHC Publishers, New York, pp. 465–503.Google Scholar
  2. 2.
    Mann, S. (1993) Molecular tectonics in biomineralization and biomimetic materials chemistry, Nature 365, 499 - 505.CrossRefGoogle Scholar
  3. 3.
    Lima, E.C.O. and Galembeck, F. (1994) Thermoreversible gel formation from aqueous aluminum polyphosphate solutions, J. Colloid and Interface Science 166, 309 - 315.CrossRefGoogle Scholar
  4. 4.
    Abreu Filho, P.P., Galembeck, F., Gandra, F.C.G., Baesso, M.L., Silva, E.C. and Vargas, H. (1990) Genesis of a solid foam: Iron (III) metaphosphate transformation in a sol-gel crystallisation process, Langmuir 6, 1013–1016.CrossRefGoogle Scholar
  5. 5.
    Lima, E.C.O. and Galembeck, F. (1993) Particle of aluminum metaphosphate containing closed pores. Preparation, characterization and optical properties, Colloid and Surfaces A: Physicochemical and EngineeringAspects 75, 65 - 74.CrossRefGoogle Scholar
  6. 6.
    Brinker, J.P. and Scherer, G.W. (1990) Sol-Gel Science, Academic Press, Boston.Google Scholar
  7. 7.
    Livage, J., Barboux, P., Vanderborre, M.T., Schmutz, C. and Taulelle, F. (1992) Sol-Gel synthesis of phosphates, J. Non-Crystalline Solids 147 & 148, 18 - 23.CrossRefGoogle Scholar
  8. 8.
    Pinheiro, E. A., Abreu Filho, P.P., Galembeck, F., Silva, E.C. and Vargas, H. (1987) Magnetite crystal formation from iron (III) hidroxide acetate. An ESR study, Langmuir 3, 445 - 448.CrossRefGoogle Scholar
  9. 9.
    Averback, R.S., Höfler, H.J. and Tao, R. (1993) Processing of nano-grained materials, Materials Science and Engineering 166, 169 - 177.CrossRefGoogle Scholar
  10. 10.
    Chokshi, A.H. (1993) Superplasticity in grained ceramics and ceramic composites: current understanding and future prospects, Materials Science and Engineering 166, 119 - 134.CrossRefGoogle Scholar
  11. 11.
    Langdon, T.G., Watanabe, T., Wadsworth, J., Mayo, M.J., Nutt, S.R., Kassner, M.E. (1993) Future research directions for interface engineering in high temperature plasticity, Materials Science and Engineering 166, 237 - 241.CrossRefGoogle Scholar
  12. 12.
    Montagne, L., Palavit, G. and Draoui, M. (1993) Mechanism of polyphosphate gel formation in the Na2O-Al2O3-P2O5 system, J. Non-Crystalline solids 155, 115 - 121.CrossRefGoogle Scholar
  13. 13.
    Lima, E.C.O., Moita Neto, J.M., and Galembeck,F. (in press), Aluminum polyphosphate thermoreversible gels: A study by 31 P and 27 AL NMR spectroscopy.Google Scholar
  14. 14.
    Beppu, M.M., Lima, E.C.O. and Galembeck, F. (in press), Aluminum Phosphate Particles Containing Closed Pores. Preparation, Characterization and Use as a White Pigment Google Scholar
  15. 15.
    Kruyt, H.R.(ed.) (1949) Colloid Sciencevol. II, Elsevier, Amsterdam.Google Scholar
  16. 16.
    Prince, L.M. (ed.) (1977) Microemulsions, Academic Press, New York.Google Scholar
  17. 17.
    Zsigmondy, R. (1926) Traité de Chimie Colloidale, Dunod, Paris, pp 187.Google Scholar
  18. 18.
    Zaiser, E.M. and La Mer, V.K. (1948) The kinetics of the formation and growth of monodispersed sulfur hydrosols, J. Colloid Science 3, 571.CrossRefGoogle Scholar
  19. 19.
    Ottewill, R.H. and Shaw, J.N. (1967) Stability of monodisperse polystirene latex dispersions of various sizes, KolloidZh. 215, 161.CrossRefGoogle Scholar
  20. 20.
    Martin, C.R. (1994) Nanomaterials: a membrane-based synthetic approach, Science 266, 1961 - 1966.CrossRefGoogle Scholar

Copyright information

© Kluwer Academic Publishers 1996

Authors and Affiliations

  • F. Galembeck
  • E. C. O. Lima
    • 1
  • M. M. Beppu
    • 2
  • R. M. Sassaki
    • 2
  • N. C. Masson
    • 2
  • V. A. R. Monteiro
    • 2
  • E. F. Souza
    • 2
  1. 1.Institute of Chemistry and GeosciencesUniversidade Federal de GoiásGoiâniaBrazil
  2. 2.Institute of ChemistryUniversidade Estadual de Campinas CP6154CampinasBrazil

Personalised recommendations