The Twentieth Century

  • Edoardo Rovida
Chapter
Part of the History of Mechanism and Machine Science book series (HMMS, volume 17)

Abstract

The twentieth century is characterized by several events relative to technical drawing. The most important correspond to the paragraphs of the present chapter as follows.

Keywords

Virtual Prototype Railway Vehicle Technical Drawing Orthographic Projection Terminal Behaviour 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. aa. vv. (2007) OMG 1907–2007 100 ans d’evolution, Ed. OMG, GallarateGoogle Scholar
  2. Apel W, Fröhlich AD (1923) Der praktischer Maschinenzeichner. Leifdaden für die Ausführung moderner maschinentechnischer Zeichnungen. Springer, BerlinGoogle Scholar
  3. Armit AP (1968) Computer systems for interactive design of three-dimensional shapes. PhD thesis, Cambridge University, CambridgeGoogle Scholar
  4. Bachmann A, Forberg DR (1960) Technisches Zeichnen, Teubner, StuttgartGoogle Scholar
  5. Bandera C, Zonta G (1997) Managerial aspects of industrial technical drawing. X ADM conference, Florence, 17–19 September 1997Google Scholar
  6. Barbero BR, Maté EG, Garcia EB, Pelosa CM (2003) Apprendizaje innovador en la visualizaciòn da piezas y dispositivos, en la formacion de dibujo técnico mediante applicaciòn hipermedia. XIII ADM conference, XV INGEGRAPH international conference, Naples, 4–6 June 2003Google Scholar
  7. Belvalette P (1953) Cours complet de dessin industriel. Dunod, ParisGoogle Scholar
  8. Bézier P (1968) Procédé de definition numérique des courbes et surfaces non mathématique: système UNISURF. Automatisme XIII 5:189–196Google Scholar
  9. Biggioggero GF, Rovida E (1976) Sulle scale dimensionali nel disegno tecnico. I Convegno Nazionale ADM, Taormina 9–11 December 1976Google Scholar
  10. Biggioggero GF, Rovida E (1980) Sulla elaborazione di alcune norme nel campo dei disegni tecnici. III Convegno ADM, SorrentoGoogle Scholar
  11. Biggioggero GF, Cugini U, Monti M, Rovida E (1983) Esperienze didattiche nell’uso di sistemi per il disegno automatico. IV Convegno Nazionale ADM, Padova 26–28 May 1983Google Scholar
  12. Biggioggero GF, Rovida E (1986) Proposte relative alla progettazione di un corso di Disegno di Macchine. V Convegno Nazionale ADM, Udine, 28–30 May 1986Google Scholar
  13. Biggioggero GF, Giannattasio F (1988) Disegno Industriale. Clup, MilanoGoogle Scholar
  14. Boni V (2007) Ducati. Mondadori, MilanoGoogle Scholar
  15. Boni V, Ardizio L (2010) Porsche. G. Nada, MilanoGoogle Scholar
  16. Borgeson G (1990) Alfa Romeo. I creatori della leggenda. G. Nada, MilanoGoogle Scholar
  17. Braid C (1974) Designing with volumes. Catalab Press, CambridgeCrossRefGoogle Scholar
  18. Bristol ESL (1970) Engineering drawing. Newnes-Butterworths, LondonGoogle Scholar
  19. Brunetti R, Rovida E (2006) La Sezione Disegno Tecnico del Museo Lombardo di Storia dell’Agricoltura, Lettera 22, PantigliateGoogle Scholar
  20. Caputo F, Manfredonia M, Palmieri RA, Palombo M (1983) Un’esperienza didattica sul CAD. IV Convegno Nazionale ADM, Padova, 26–28 May 1983Google Scholar
  21. Carugati DGR (2009) Lamborghini. Electa, MilanoGoogle Scholar
  22. Cavalieri Ducati B (1991) Storia della Ducati. Editografica, RastignanoGoogle Scholar
  23. Concheri G, Guggia A (1993) Un’esperienza di insegnamento del disegno assistito da calcolatore nel biennio dei corsi di laurea in ingegneria. VIII Convegno Nazionale ADM, Castelfranco Veneto, 22–24 September 1993Google Scholar
  24. Concheri G, Milanese V (1993) Una proposta per il corso di grafica computazionale tecnica. VIII Convegno Nazionale ADM, Castelfranco Veneto 22–24 SeptemberGoogle Scholar
  25. Conradt DM (2008) Il grande libro della Porsche 356. G. Nada, MilanoGoogle Scholar
  26. Coons SA (1967) Surfaces for computer-aided design of space forms, M.I.T./LCS/TR-41Google Scholar
  27. Di Nola M (1987) Quattro ruote che lavorano. Edizione de Il Sole 24 Ore Management, MilanoGoogle Scholar
  28. Federighi M, Clark A (2009) Leaders by design: engineering design as a tool for developing leadership skills. International Conference on Engineering Design ICED 09. Stanford University, Stanford 24–27 August 2009Google Scholar
  29. Fernandez-Jambrina L, López-Pulido R (2003) E-learning of computer-aided geometric design. XIII ADM Conference - XV INGEGRAPH international conference, Napoli, 4–6 June 2003Google Scholar
  30. Ferrari P, Turrini L (2007) Ferrari, mio padre. Aliberti, Reggio EmiliaGoogle Scholar
  31. French TE, Svensen CL (1957) Mechanical drawing. McGraw Hill, New YorkGoogle Scholar
  32. Forrest AR (1968) Curves and surfaces for computer-aided design. University of Cambridge, CambridgeGoogle Scholar
  33. Galli G, Guarneri M, Rovida E (2005) Experiences of engineering design education at Pavia University. International conference on engineering design, ICED 05, Melbourne, 15–18 August 2005Google Scholar
  34. Giesecke FE, Mitchell A, Spencer HC (1948) Technical drawing. MacMillan, New YorkGoogle Scholar
  35. Gilardi A (1926) Note al corso di disegno di macchine tenuto nel R. Istituto tecnico superiore di Milano. Libreria editrice politecnica, MilanoGoogle Scholar
  36. Goodfellow W (2009) Isorivolta. The men, the machines G. Nada, MilanoGoogle Scholar
  37. Groutel É (1948) Lecture du dessin industriel. Foucher, ParisGoogle Scholar
  38. Hernandez Abad F, Vives MO, Abad VH, Andreu JF (2003) Material didactico para la ensenanza da materias graficas a distancia. XIII ADM conference – XV INGEGRAPH international conference, Napoli, 4–6 June 2003Google Scholar
  39. Hernandez Abad F, Vives MO, Abad VH, Andreu JF (2003) Metodologia de formaciòn para el personal colaborador en la ensenanza a distancia, XIII ADM conference – XV INGEGRAPH international conference, Napoli, 4–6 June 2003Google Scholar
  40. Holt K (1995) Brainstorming: from classic to electronics. International conference on engineering design ICED 95, Praha, 22–24 August 1995Google Scholar
  41. Hull P, Slata R (1970) La storia dell’Alfa Romeo. Baldini & Castoldi, MilanoGoogle Scholar
  42. Jones FD (1941) Mechanical drawing. Industrial Press, New YorkGoogle Scholar
  43. Keiser K (1914) Freies Skizzieren ohne und nach Modell fuer Maschinenbauer. Springer, BerlinGoogle Scholar
  44. Laning JH et al. (1973) SHAPES user’s manual. Charles Stark Draper Laboratory, Cambridge, MAGoogle Scholar
  45. Luzadder WJ (1946) Fundamentals of engineering drawing. Prentice Hall, Upper Saddle RiverGoogle Scholar
  46. Luzadder WJ (1956) Technical drafting essential. Prentice Hall, Upper Saddle RiverGoogle Scholar
  47. Machiel Van der Loos HF, Ostafichuk PM (2009) Case study: application of team-based learning to a mechanical engineering design course traditional taught in lecture format. International conference on engineering design ICED 09, Stanford University, Stanford 24–27 August 2009Google Scholar
  48. Massero F (1937) Disegno di Macchine. Hoepli, MilanoGoogle Scholar
  49. Milano e l’Esposizione internazionale del 1906. La rappresentazione della modernità (2008). Storia in Lombardia XXVIII(1)Google Scholar
  50. Milanese V, Tosetti A (1986) Una proposta di corso di disegno assistito da calcolatore. V Convegno Nazionale ADM, Udine, 28–30 May 1986Google Scholar
  51. Nieuport Macchi (1920) Società Anonima Nieuport Macchi, VareseGoogle Scholar
  52. Pasini S (2011) Storia della Porsche. Idealibri, Sant’Arcangelo di RomagnaGoogle Scholar
  53. Pavan L, Sabbatini A (eds) (1987) Disegni di Macchine. Evoluzione di un linguaggio nello sviluppo della tecnica, Catalogue of the exhibition. Grafiche Editoriali Artistiche Pordenonesi, PordenoneGoogle Scholar
  54. Pfarr A (1907) Die Turbinen für Wasserkraftbetrieb. Ihre Theorie und Konstruktion. J. Springer, BerlinMATHGoogle Scholar
  55. Rabe K, Steinke H, Linke H (1967) Das technisches Zeichnen. Hanser Verlag, MünchenGoogle Scholar
  56. Requicha A, Voelcker H (1974) PADL Part and Assembly Description Language, Production Automation Project. Rochester University, RochesterGoogle Scholar
  57. Rovida E (1999) Dallo scalpello al mouse. Paravia, TorinoGoogle Scholar
  58. Riedler A (1923) Die Maschinenzeichnen, J. Springer, BerlinGoogle Scholar
  59. Riesenfeld RF (1973) Applications of b-spline approximation to geometric problems of computer-aided-design. PhD thesis, Syracuse University, SyracuseGoogle Scholar
  60. Santoro EM, Schiavone M (1986) Sull’uso didattico di microcomputers per la risoluzione di problemi CAD. V Convegno Nazionale ADM, Udine, 28–30 May 1986Google Scholar
  61. Sauer K (1923) Leitfaden für den Maschinenzeichen. J. Springer, BerlinGoogle Scholar
  62. Schneider W, Sappert D (1971) Technisches Zeichnen für die Praxis. Eine Einführung in die Grundlagen und in die Arbeit des technischen Zeichnens. Westermann, BraunschweigGoogle Scholar
  63. Schroeter G, Schroeter C (1973), Lesen, Verstehen, Vorstellen,W. Girardet, EssenGoogle Scholar
  64. Speluzzi M, Tessarotto M (1968) Disegno di Macchine, Hoepli, MilanoGoogle Scholar
  65. Spooner HJ (1943) Machine drawing and design for beginners. Longmans, Green & Co., LondonGoogle Scholar
  66. Stodola A (1910) Die Dampfturbinen und die Aussichten der Warmekraftmaschinen Berlin. J. Springer, BerlinGoogle Scholar
  67. Storia della Lancia (1989). Ed. Lancia, TorinoGoogle Scholar
  68. Volk C (1921) Das Maschinenzeichnen des Konstrukteurs. Springer, BerlinGoogle Scholar
  69. Viganò R, Rovida E, Vincenti R, Ramondino M (2010) Approach to a semi-immersive tool for rider simulation training with an application for road sign perception. In: Proceeding of TMCE symposium 2010, Ancona, 12–16 April 2010Google Scholar
  70. Wolgensinger J (1991) André Citroën. Flammarion, Paris. (Italian translation) (2003). Lupetti, MilanoGoogle Scholar
  71. Zavadini G (1995) San Giorgio-Elsag. Novant’anni di sviluppo aziendale. In: Il coltello di Delfo, TorinoGoogle Scholar
  72. Zozzora F (1953) Engineering drawing. McGraw Hill, New YorkGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2013

Authors and Affiliations

  • Edoardo Rovida
    • 1
  1. 1.Department of MechanicsPolitecnico de MilanoMilanItaly

Personalised recommendations