Tensile Behavior of Textile: Influence of Multilayer Reinforcement

  • I. Colombo
  • M. Colombo
  • A. Magri
  • G. Zani
  • M. di Prisco
Part of the RILEM State of the Art Reports book series (RILEM, volume 2)

Abstract

The interest in the use of textile fabrics as reinforcement for cement based composite materials has been increasing in the last few years. Textile cementitious composites show improved tensile performances; as a matter of fact in addiction to a considerable peak strength, these composites show a strain hardening behavior even when the reinforcing yarns have a low modulus of elasticity. This was explained by the enhancement in bonding due to the mechanical anchoring provided by the non-linear geometry of the individual yarn within the fabric.

The paper investigates the tensile behavior of textile reinforced mortar as influenced by different geometrical reinforcement ratio in prismatic specimens. In all the experimental tests the load direction will be parallel to the fabric warp. Three different geometrical reinforcement ratio were investigated in order to evaluate their effectiveness and their influence both on tensile strength and on crack pattern.

Keywords

Tensile Behavior Reinforcement Ratio Wire Spacing Fiber Reinforce Cement Composite Textile Reinforce Mortar 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Roye, A., Gries, T., Peled, A.: Spacer fabrics for thin walled concrete elements. In: de Plizzari, P.F. (ed.) 6th RILEM Symposium on Fiber-reinforced Concretes (FRC), BEFIB, Varenna, Italy, pp. 1505–1514 (2004)Google Scholar
  2. 2.
    Brameshuber, W. (ed.) Textile Reinforced Concrete state of art report of RILEM technical committee 201-TRC, Aachen (2006)Google Scholar
  3. 3.
    Hegger, J., Brameshuber, W., Will, N. (eds.): 2nd ICTRC Textile Reinforced Concrete Proceedings International RILEM Conference on Material Science, MatSci (2010)Google Scholar
  4. 4.
    Jesse, F., Curbach, M.: Strength of continuous AR-glass fiber reinforcement of cementitious composites. In: Jesse, F., Curbach, M. (eds.) Fourth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 4), pp. 337–348. RILEM Publications (2003)Google Scholar
  5. 5.
    Häußler-Combe, U., Hartig, J.: Bond and failure mechanisms of textile reinforced concrete (TRC) under uniaxial tensile loading. Cement Concrete & Composites 29, 279–289 (2007)CrossRefGoogle Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2012

Authors and Affiliations

  • I. Colombo
    • 1
  • M. Colombo
    • 1
  • A. Magri
    • 1
  • G. Zani
    • 1
  • M. di Prisco
    • 1
  1. 1.Politecnico di MilanoMilanoItaly

Personalised recommendations