Orthotropic Model for the Analysis of Beams with Corrugated Steel Webs

  • Gabriele Bertagnoli
  • Mario Alex Biagini
  • Giuseppe Mancini
Conference paper

Abstract

A flat orthotropic finite element model for steel and composite beams with corrugated webs is presented in this paper. The target of the authors is to improve computational efficiency and to reduce input time by means of material orthotropic equivalence. The results obtained with the simplified model proposed in the paper are compared to both the available outputs from experimental tests and other numerical analyses done with full 3D models. Both elastic and plastic behaviour is investigated. Buckling loads of corrugated steel webs under different loading cases are studied in detail. A parametric study of the 2D “flat” equivalent model is presented in order to investigate the influence of geometric parameters on the structural behavior and to check the robustness of the simplified method in predicting different failure modes. Finally, the effect of mesh size is studied on a control specimen. Good overall results of this procedure are demonstrated.

Keywords

Equivalent Thickness Flat Model Lateral Torsional Buckling Prestressed Concrete Bridge Concrete Girder 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Aravena L, Edlund B (1987) Trapezoidally corrugated panels-buckling behavior under axial compression and shear. Publ 87.1, Division of Steel and Timber Structures, Chalmers University of Technology, SwedenGoogle Scholar
  2. Ata Y et al (2001) Static and fatigue test of beam specimens for prestressed concrete bridge with corrugated steel web. Prestress Concr J Japan 43(4):72–81Google Scholar
  3. Basler K (1961) Strength of plate girders in shear. Proc ASCE 1 J Struct Div USA 87:151–180Google Scholar
  4. Dahlen A, Krona KM (1983) Lokal intryckning av veckat liv provning av plàtbalkar med veckat liv under punktlast. Chalmers Tekniska Hogskola, Institutionen for Konstruktionsknik, Goteborg, SwedenGoogle Scholar
  5. Easley JT, McFarland D (1969) Buckling of light, gage corrugated shear diaphragms. J Struct Div USA 95:1497–1516Google Scholar
  6. Elgaaly M, Seshadri A (1997) Girders with corrugated webs under partial compressive edge loading. J Struct Eng ASCE Philadelphia 123(6):783–791CrossRefGoogle Scholar
  7. Elgaaly M, Seshadri A (1998) Depicting the behavior of girder with corrugated webs up to failure using non-linear finite element analysis. Elsevier, PhiladelphiaGoogle Scholar
  8. Elgaaly M, Seshadri A, Hamilton RW (1997) Bending strength of steel beams with corrugated webs. J Struct Eng ASCE Philadelphia 123(6):772–782CrossRefGoogle Scholar
  9. El-Metwally AS (1998) Prestressed composite girders with corrugated steel web. Thesis for degree of master, University of Calgary, AlbertaGoogle Scholar
  10. Fraser AF (1956) Experimental investigation of the strength of multiweb beams with corrugated webs. National Advisory Committee for Aeronautics, Washington, DCGoogle Scholar
  11. Huang L, Hikosaka H, Komine K (2002) Simulation of accordion effect in corrugated steel web with concrete flanges. Computer & Structures 82(23–26):2061–2069Google Scholar
  12. Ibrahim SA, El-Dakhakhni WW, Elgaaly M (2006) Behavior of bridge girders with corrugated webs under monotonic and cyclic loading. Eng Struct 28:1941–1955, CanadaCrossRefGoogle Scholar
  13. Johnson RP, Cafolla J (1997) Fabrication of steel bridge girders with corrugated webs. Struct Eng UK 75(8):133–135Google Scholar
  14. Lindner J (1991) Shear capacity of beams with trapezoidally corrugated webs and openings. Proceedings of Structure Stability Research Council, Chicago, 1991Google Scholar
  15. Luo R, Edlund B (1995) Numerical simulation of shear tests on plate girders with trapezoidally corrugated webs. Division of Steel and Timber Structures, Chalmers University of Technology, GöteborgGoogle Scholar
  16. Luo R, Edlund B (1996) Ultimate strength of girders with trapezoidally corrugated webs under patch loading. Thin-Walled Struct 123(6):135–156CrossRefGoogle Scholar
  17. Timoshenko SP, Woinowsky-Krieger S (1970) Theory of plates and shells, 2nd edn. McGraw-Hill, New YorkGoogle Scholar

Copyright information

© Springer Science+Business Media B.V. 2012

Authors and Affiliations

  • Gabriele Bertagnoli
    • 1
  • Mario Alex Biagini
    • 1
  • Giuseppe Mancini
    • 1
  1. 1.Dipartimento di Ingegneria Strutturale e GeotecnicaPolitecnico di TorinoTorinoItaly

Personalised recommendations