The Role of MMS (Mechanism and Machine Science) and IFToMM in Greece

Chapter
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 1)

Abstract

Based on the results of a postal ballot among the Chairs of the International Federation for the Theory of Machines and Mechanisms (IFToMM) members in 1999, Greece was accepted for membership by the National Member Committee. With addition of this new membership, IFToMM had 45 members all over the world. The late Professor A. Dimarogonas (1938–2000) had advocated for the establishment of a Greek Section of IFToMM since the 1980s. The historical evolution of the Greek committee of the Greek Section of IFToMM and its influence on the structure of the courses of Machine Design, Synthesis of Mechanisms and the History of Technology in the Mechanical Engineering Department is presented here. The contribution of IFToMM to the development of Engineering Design and the Theory of Machines in Greece is also described.

Keywords

Engineering Ethic Machine Theory Machine Design Mechanical Engineer Department Gear Train 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    IFToMM: Minutes of the general Assembly Meeting, Appendix 3. In: 9th General Assembly of the International Federation for the Theory of Machines and Mechanisms, Oulu, 23 June 1999Google Scholar
  2. 2.
    Chondros, T.G.: J. Sound Vib. 244(1), 21–23 (2001). In Memoriam A.D. Dimarogonas (1938–2000)CrossRefGoogle Scholar
  3. 3.
    Dimarogonas, A.D.: Computer Aided Machine Design. Prentice-Hall, Englewood Cliffs (1988)Google Scholar
  4. 4.
    Dimarogonas, A.D.: Computer Programs for Mechanical Engineers. Prentice-Hall, Englewood Cliffs (1993)Google Scholar
  5. 5.
    Dimarogonas, A.D.: Vibration Engineering. WEST Publishers, St. Paul (1976)Google Scholar
  6. 6.
    Dimarogonas, A.D., Haddad, S.: Vibration for Engineers. Prentice-Hall, Englewood Cliffs (1992)MATHGoogle Scholar
  7. 7.
    Dimarogonas, A.D.: Vibration for Engineers, 2nd ed. Prentice-Hall, Upper Saddle River (1996)Google Scholar
  8. 8.
    Dimarogonas, A.D., Paipetis, S.A.: Rotor Dynamics. Elsevier-Applied Science, London (1983)Google Scholar
  9. 9.
    Dimarogonas, A.D.: History of Engineering, 1st ed. Symmetry Publications, Athens (1976)Google Scholar
  10. 10.
    Dimarogonas, A.D.: The origins of vibration theory. J. Sound Vib. 140(2), 181–189 (1990)MathSciNetMATHCrossRefGoogle Scholar
  11. 11.
    Dimarogonas, A.D.: A brief history of rotor dynamics. Keynote Address: Rotordynamics 92, Venice, pp. 1–9. Springer, Berlin (1992)Google Scholar
  12. 12.
    Dimarogonas, A.D.: Machine Design: The CAD Approach. Wiley, New York (2001)Google Scholar
  13. 13.
    Hartenberg, R., Denavit, J.: Kinematic Synthesis of Linkages. McGraw-Hill, New York (1964)Google Scholar
  14. 14.
    Shigley, J.E., Uicker, J.J.: Theory of Machines and Mechanisms. McGraw-Hill, New York (1981)Google Scholar
  15. 15.
    Shigley, J.E., Mischke, C.R., Budynas, R.G.: Mechanical Engineering Design. McGraw-Hill, New York (2004)Google Scholar
  16. 16.
    Norton, R.: Design of Machinery. McGraw-Hill, New York (1994)Google Scholar
  17. 17.
    Artobolevski, I.I.: Mechanisms in modern engineering design. A Handbook for Engineers Designers and Inventors (English Translation). MIR, Moscow (1975)Google Scholar
  18. 18.
    Bakhvalov, N.S.: Numerical Methods. MIR, Moscow (1977)Google Scholar
  19. 19.
    Chemilevski, D., Lavrova, E., Romanov, V.: Mechanics for Engineers. MIR, Moscow (1984)Google Scholar
  20. 20.
    Feodosyev, V.: Strength of Materials. MIR, Moscow (1973)Google Scholar
  21. 21.
    Movnin, M., Goltziker, D.: Machine Design. MIR, Moscow (1975)Google Scholar
  22. 22.
    Muškis, A.D.: Advanced Mathematics for Engineers. MIR, Moscow (1975)Google Scholar
  23. 23.
    Orlov, P.: Fundamentals of Machine Design. MIR, Moscow (5-volumes English Translation) (1976)Google Scholar
  24. 24.
    Targ, S.: Theoretical Mechanics, A Short Course. MIR, Moscow (1976)Google Scholar
  25. 25.
    Reshetov, L.: Self-Aligning Mechanisms. MIR, Moscow (1982)Google Scholar
  26. 26.
    Ginsberg, J.H.: Advanced Engineering Dynamics. Cambridge University Press, Cambridge (1996)Google Scholar
  27. 27.
    Greenwood, D.T.: Principles of Dynamics. Prentice Hall, Englewood Cliffs (1988)Google Scholar
  28. 28.
    Timoshenko, S., Young, D.H., Weaver Jr., W.: Vibration Problems in Engineering, 4th edn. Wiley, New York (1974)Google Scholar
  29. 29.
    Williams, J.H.: Fundamentals of Applied Dynamics. Wiley, New York (1996)Google Scholar
  30. 30.
    Artamonov, M.D., Ilarionov, V.A., Morin, M.M.: Motor Vehicles, Fundamentals and Design. MIR, Moscow (1976)Google Scholar
  31. 31.
    Böhm, F., Willumeit, H.P. (eds.): Tyre Models for Vehicle Dynamic Analysis. Swets and Zeitlinger, London (1997)Google Scholar
  32. 32.
    Brach, R., Brach, M.: Vehicle Accident Analysis and Reconstruction Methods. SAE International, Warrendale (2005)Google Scholar
  33. 33.
    Clennon, J.C., Hill, P.F.: Roadway Safety and Tort Reliability, 2nd edn. L&J Publishing Company, Inc., Tucson (2004)Google Scholar
  34. 34.
    Ellis, J.R.: Vehicle Handling Dynamics. Mechanical Engineering Publications, London (1994)Google Scholar
  35. 35.
    Elvik, R., Vaa, T.: The Handbook of Safety Measures. Elsevier, Amsterdam (2004)Google Scholar
  36. 36.
    Evans, L.: Traffic Safety. Science Serving Society, Bloomfield Hills (2004)Google Scholar
  37. 37.
    Gillespie, T.D.: Fundamentals of Vehicle Dynamics. SAE International, Warrendale (1992)Google Scholar
  38. 38.
    Lukin, P., Gasparyants, G., Rodionov, V.: Automobile Chassis Design and Calculations. MIR, Moscow (1989)Google Scholar
  39. 39.
    Milliken, W.F., Milliken, D.L.: Race Car Vehicle Dynamics. SAE Press, Warrendale (1995)Google Scholar
  40. 40.
    Newton, K., Steeds, W., Garrett, T.K.: The Motor Vehicle. Butterworth-Heinemann, Oxford (1997)Google Scholar
  41. 41.
    Wong, J.Y.: Theory of Ground Vehicles. Wiley, New York (2008)Google Scholar
  42. 42.
    Chondros, T.G.: Archimedes (287–212 BC). In: Ceccarelli, M. (ed.) Distinguished Figures in Mechanism and Machine Science, Their Contributions and Legacies, Part 1. History of Mechanism and Machine Science, vol. 1, pp. 1–30. Springer, Dordrecht (2007). ISBN ISSBN 978-1-4020-6365-7CrossRefGoogle Scholar
  43. 43.
    Ceccarelli, M.: Screw axis defined by Giulio Mozzi in 1763 and early studies on helicoidal motion. Mech. Mach. Theory 35, 761–770 (2000)MATHCrossRefGoogle Scholar
  44. 44.
    Chondros, T.G.: A World Conference on THE GENIUS OF ARCHIMEDES 23 Centuries of Influence on the Fields of Mathematics, Science, and Engineering 8–10 June 2010, Syracuse, Sicily (Italy). Archimedes Influence in Science and Engineering. History of Mechanism and Machine Science II, The Genius of Archimedes-23 Centuries of Influence on Mathematics, Science and Engineering, Proceedings of an International Conference held at Syracuse, Italy, June 8–10, 2010 Springer Science+Business Media B.V. 2010 S. Paipetis and M. Ceccarelli (Editors) 411–425 (2010)Google Scholar
  45. 45.
    Chondros, T.G.: Archimedes life works and machines. J. Mech. Mach. Theory 45(11), 1766–1775 (2010)MATHCrossRefGoogle Scholar
  46. 46.
    Dowson, D.: History of Tribology. Longman Group Ltd, London (1979)Google Scholar
  47. 47.
    Lancaster, J.: Engineering Catastrophes – Causes and Effects of Major Accidents. Abington Publishing, Cambridge (1996)Google Scholar
  48. 48.
    Schroedinger, E.: Nature and the Greeks. Cambridge University Press, London (1954)MATHGoogle Scholar
  49. 49.
    Sih, G.C.: Survive with the time o’clock of nature RRRTEA 04 [Restoration, Recycling, and Rejuvenation Technology for Engineering and Architecture Application]. In: Sih, G.C., Nobile, L. (eds.) Proceedings of the International Conference, pp. 3–22, Cesena, Aracne (2004)Google Scholar
  50. 50.
    Vitruvius, M.P.: 1st Century AD. De Architectura, v. 7.Google Scholar
  51. 51.
    Dimarogonas, A.D.: The Origins of the Theory of Machines and Mechanisms. In: Proceedings 40 Years of Modern Kinematics: A Tribute to Ferdinand Freudenstein Conference, pp. 1–2 to 1–11, Minneapolis (1991)Google Scholar
  52. 52.
    Dimarogonas, A.D: Mechanisms of the Ancient Greek Theater. American Society of Mechanical Engineers. In: Mechanisms Conference, Phoenix, pp. 229–234. ASME Design Engineering Division (Publication) DE 46 (1992)Google Scholar
  53. 53.
    Dimarogonas, A.D., Chondros, T.G.: Deus Ex Machina design and reconstruction. In: International Conference on Ancient Greek Technology, SPS Olympia, Greece (2001) (In Greek)Google Scholar
  54. 54.
    Reuleaux, F.: Theoretische Kinematik, (Translated in English by Kennedy, B.W.) (ed.) Macmillan & Co, London (1876)Google Scholar
  55. 55.
    Papadopoulos, E.: In: Ceccarelli, M. (ed.) Distinguished Figures in Mechanism and Machine Science, Their Contributions and Legacies, Part 1. History of Mechanism and Machine Science, vol. 1. Springer, Dordrecht (2007). ISBN ISSBN 978-1-4020-6365-7Google Scholar
  56. 56.
    Chondros, T.G.: EUCOMES 08 Second European Conference on Mechanism Science. In: Ceccarelli, M. (ed.) Proceedings of EUCOMES 08 Springer Science+Business Media B.V. 2009, Cassino, 17–20 Sept 2008, Archimedes and the origins of mechanisms designGoogle Scholar
  57. 57.
    Chondros, T.G.: The development of machine design as a science from classical times to modern era. Invited lecture. In: HMM 2008 International Symposium on History of Machines and Mechanisms, Tainan, Taiwan, 11–14 Nov 2008. Proceedings Published by the Springer, the Netherland, ISBN 978-1-4020-9484-2Google Scholar
  58. 58.
    Ishlinsky, A., Chernousko, F.: Advances in Theoretical and Applied Mechanics. MIR, Moscow (1981)MATHGoogle Scholar
  59. 59.
    Erdman, A., Sandor, G.N.: Mechanism Design, Analysis and Synthesis. Prentice-Hall, Englewood Cliffs (1984)Google Scholar

Copyright information

© Springer Science+Business Media B.V. 2011

Authors and Affiliations

  1. 1.Mechanical Engineering and Aeronautics Department, School of EngineeringUniversity of PatrasPatrasGreece

Personalised recommendations