Activity and Trends in MMS from IFToMM Community

Chapter
Part of the Mechanisms and Machine Science book series (Mechan. Machine Science, volume 1)

Abstract

Mechanism and Machine Science (MMS) has been the core of mechanical engineering, and indeed of industrial engineering, since the beginning of engineering practice and particularly in modern times. A short survey is presented to outline the main characteristics of mechanisms and their evolution with the aim to identify challenges and the role of MMS in future developments of Technology for the benefit of Society. The significance of IFToMM, the International Federation for the Promotion of MMS, is also stressed as the worldwide community that in the past 40 years has contributed the most to aggregate common views and developments with an important role for future improvements yet to come. Modern systems specifically with mechatronic design and operation still need careful attention from mechanism design viewpoints to properly achieve the goals of forwarding technological developments for supporting or replacing human operators in their activity.

Keywords

Service System Multibody System Service Task General Assembly Service Robot 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Notes

Acknowledgements

The author wishes to thank Prof. Adalberto Vinciguerra from ‘La Sapienza’ University of Rome, who with his mentoring guide has transmitted his interest and enthusiasm for international collaboration and particularly for IFToMM. Among many other IFToMM officers, the author is also very grateful to the past IFToMM Presidents Prof. Bernard Roth, late Prof. Adam Morecki, and Prof. Jorge Angeles, who with their advice and encouragement helped him to reach a maturity both in engineering science and in IFToMM business. Finally the author wishes to thank Prof. Carlos Lopez-Cajùn, current IFToMM Secretary General, and Dr. Joseph Rooney, current Treasurer, for their friendship and strong support with discussions and advice during these years of IFToMM Presidency. Dr. Rooney is also acknowledged for revision and comment of this paper.

References

  1. 1.
    Chasles, M.: Apercu historique sur l’origin et le développement des méthodes en géométrie. Mémoires couronnés par l’Académie de Bruxelles, vol.11 (2nd ed. Paris, 1875) (1837)Google Scholar
  2. 2.
    Chasles, M.: Exposé historique concernant le cours de machines dans l’enseignement de l’Ecole Polytechinique. Gauthier-Villars, Paris (1886)Google Scholar
  3. 3.
    Crossley, E.F.R.: Recollections from forty years of teaching mechanisms. ASME J. Mech. Trans. Autom. Des. 110, 232–242 (1988)CrossRefGoogle Scholar
  4. 4.
    De Groot, J.: Bibliography on Kinematics. Eindhoven University, Eindhoven (1970)Google Scholar
  5. 5.
    De Jonge, A.E.R.: A brief account of modern kinematics. Trans. ASME 663–683 (1943)Google Scholar
  6. 6.
    Dimarogonas, A.D.: The origins of the theory of machines and mechanisms. In: Erdman, A.G. (ed.) Modern Kinematics – Developments in the Last Forty Years, pp. 3–18. Wiley, New York (1993)Google Scholar
  7. 7.
    Ferguson, E.S. Kinematics of mechanisms from the time of Watt. In: Contributions from the Museum of History and Technology, Washington, paper 27, pp. 186–230 (1962)Google Scholar
  8. 8.
    Hartenberg, R.S., Denavit J.: Men and machines an informal history, Machine Design, May 3, 1956, pp. 75–82; June 14, 1956, pp. 101–109; July12, 1956, pp. 84–93 (1956)Google Scholar
  9. 9.
    Koetsier, T.: Mechanism and machine science: its history and its identity. In: Proceedings of HMM2000 – the First IFToMM International Symposium on History of Machines and Mechanisms, pp. 5–24. Springer, Dordrecht (2000)Google Scholar
  10. 10.
    Nolle, H.: Linkage coupler curve synthesis: a historical review –I and II, IFToMM. J. Mech. Mach. Theor. 9(2), 147–168 (1974); pp. 325–348CrossRefGoogle Scholar
  11. 11.
    Reuleaux, F.: Theoretische Kinematic, Chapter 1. Fridrich Vieweg, Braunschweig (1875)Google Scholar
  12. 12.
    Roth, B.: The search for the fundamental principles of mechanism design. In: International Symposium on History of Machines and Mechanisms – Proceedings of HMM2000, pp. 187–195. Kluwer, Dordrecht (2000)Google Scholar
  13. 13.
    Ceccarelli, M. (ed.): International Symposium on History of Machines and Mechanisms – Proceedings of HMM2000. Kluwer, Dordrecht (2000)Google Scholar
  14. 14.
    Ceccarelli, M. (ed.): International Symposium on History of Machines and Mechanisms – Proceedings of HMM2004. Kluwer, Dordrecht (2004)Google Scholar
  15. 15.
    Yan, H.S., Ceccarelli M. (eds.): International Symposium on History of Machines and Mechanisms – Proceedings of HMM2008. Springer, Dordrecht (2008)Google Scholar
  16. 16.
    Ceccarelli, M.: From TMM to MMS: a vision of IFToMM. Bull. IFToMM Newsl. 10(1) http://www.iftomm.org (2001)
  17. 17.
    Ceccarelli, M.: The challenges for machine and mechanism design at the beginning of the third millennium as viewed from the past. In: Invited Lectures, Proceedings of Brazilian Congress on Mechanical Engineering COBEM2001, Uberlandia, pp.132–151, vol. 20 (2001)Google Scholar
  18. 18.
    Ceccarelli, M.: Classifications of mechanisms over time. In: Proceedings of International Symposium on History of Machines and Mechanisms HMM2004, pp. 285–302. Kluwer, Dordrecht (2004)Google Scholar
  19. 19.
    Ceccarelli, M.: Challenges for mechanism design. In: Keynote paper, the 10th IFToMM International Symposium on Science of Mechanisms and Machines SYROM’09, Brasov, pp.1–13. Springer, Dordrecht, 12–15-Oct 2009, ISBN 978-90-481-3521-9. DOI  10.1007/978-90-481-3522-6
  20. 20.
    Ceccarelli, M.: Early TMM in Le Mecaniche by Galileo Galilei in 1593. Mech. Mach. Theor. 41(12), 1401–1406 (2006)MathSciNetMATHCrossRefGoogle Scholar
  21. 21.
    Crossley, F.R.E.: The international federation for the theory of machines and mechanisms. J. Mech. 5, 133–145 (1970)CrossRefGoogle Scholar
  22. 22.
    IFToMM.: IFToMM Commission A. Standard for terminology. Mech. Mach. Theor. 26(5) (1991)Google Scholar
  23. 23.
    IFToMM: Standardization and terminology. Mech. Mach. Theor. 38(7–10), special issue (2003)Google Scholar
  24. 24.
    Lanz, J.M.: Betancourt, A.: Essai sur la composition des machines, Paris (1808)Google Scholar
  25. 25.
    Masi, F.: Teoria dei meccanismi. Zanichelli, Bologna (1897)Google Scholar
  26. 26.
    Uicker, J.J., Pennock, G.R., Shigley, J.E.: Theory of Machines and Mechanisms. Oxford University Press, New York (2003)Google Scholar
  27. 27.
    Ceccarelli, M.: On the meaning of TMM over time. Bull. IFToMM Newsl. 8(1) http://www.iftomm.org (1999)
  28. 28.
    Angeles, J., Bianchi, G., Bessonov, A.P., Maunder, L., Morecki, A., Roth, B.: A history of IFToMM,  Chapter 2. In: Proceedings of HMM2004 – the Second IFToMM International Symposium on History of Machines and Mechanisms, pp. 25–125. Springer, Dordrecht (2004)
  29. 29.
    Ceccarelli, M.: IFToMM celebration for 40th year celebration. Mech. Mach. Theor. 45, 119–127 (2010)MathSciNetMATHCrossRefGoogle Scholar
  30. 30.
    Crossley, F.R.E.: The early days of IFToMM. In: Proceedings of 8th IFToMM World Congressm, Prague, pp. 4–9, vol. 1 (1991)Google Scholar
  31. 31.
    Maunder, L.: The progress of IFToMM. Mech. Mach. Theor. 15, 415–417 (1980)CrossRefGoogle Scholar
  32. 32.
    Maunder, L.: Report: the scientific activity of IFToMM. Mech. Mach. Theor. 23, 329–332 (1988)CrossRefGoogle Scholar
  33. 33.
    Morecki, A: International friendly thinkers organization (who likes) machines and mechanisms (IFToMM) – where are we going? In: Proceedings of 10th IFToMM World Congress, Oulu (1999)Google Scholar
  34. 34.
    Ceccarelli, M., Waldron, K.J.: Open letter from IFToMM. IFToMM webpage (2009)Google Scholar
  35. 35.
    Ceccarelli, M.: Preliminary studies to screw theory in XVIIth century, Ball Conference, Cambridge, CD Proceedings (2000)Google Scholar
  36. 36.
    Ceccarelli, M.: A historical perspective of robotics toward the future. Fuji Int. J. Robot. Mechatron. 13(3), 299–313 (2001)Google Scholar
  37. 37.
    Ceccarelli, M.: IFToMM activity and its visibility. Bull. IFToMM Newsl. 13(1) http://www.iftomm.org (2004)
  38. 38.
    Ceccarelli, M.: Evolution of TMM (Theory of Machines and Mechanisms) to MMS (Machine and Mechanism Science): an illustration survey. Keynote Lecture, 11th IFToMM World Congress in Mechanism and Machine Science, Tianjin, vol.1, pp.13–24 (2004)Google Scholar
  39. 39.
    Ceccarelli, M.: Renaissance of machines in Italy: from Brunelleschi to Galilei through Francesco di Giorgio and Leonardo. Mech. Mach. Theor. 43, 1530–1542 (2008)MATHCrossRefGoogle Scholar
  40. 40.
    Ceccarelli, M.: A short introduction on IFToMM officers over time. In: Proceedings of HMM2008- the Third IFToMM International Symposium on History of Machines and Mechanisms, pp. 3–10. Springer, Dordrecht (2008)Google Scholar
  41. 41.
    Bottema, O., Freudenstein, F.: Kinematics and the Theory of Mechanisms, Appl. Mech. Rev. 19(4), 287–293 (1966)Google Scholar
  42. 42.
    Morecki, A.: Past present and future of IFToMM. Mech. Mach. Theor. 30, 1–9 (1995)CrossRefGoogle Scholar
  43. 43.
    Shah, J.J. (ed.): Research Opportunities in Engineering Design – Final Report to NSF, NSF Strategic Planning Workshop. ASME DETC, Irvine (1996)Google Scholar
  44. 44.
    Roth, B.:” Robots – state of art in regard to mechanisms theory”. ASME J. Mech. Transm. Automat. Des. 105, 11–12 (1983)Google Scholar

Copyright information

© Springer Science+Business Media B.V. 2011

Authors and Affiliations

  1. 1.Laboratory of Robotics and Mechatronics, DIMSATUniversity of CassinoCassinoItaly

Personalised recommendations