Entropy Generation for Free and Forced Convection in a Porous Cavity and a Porous Channel

  • A. C. Baytas
Conference paper
Part of the NATO Science Series book series (NAII, volume 134)

Abstract

The concept of irreversibility is based on the second law of thermodynamics which serves to optimise the design of thermal, fluid and energy systems. The theories of reversibility and irreversibility are important in thermodynamics and crucial to the exergy method. Understanding the nature of irreversibility and how to minimise them in practice is essential for an engineering thermodynamicist. Contemporary engineering thermodynamics uses the rate of entropy generation as a parameter to quantify the significance of these irreversibilities. The local values of entropy generation due to viscous and thermal effects can be mapped to detect, by inspection, the key areas that requires a design modification. This emerging technology is viewed to have a meaningful potential for improving thermal systems design. In the thermal design decisions the utilisation of the second law of thermodynamics is very well referenced, see Bejan [5, 7]. Drost and White [8] studied numerical calculations of local entropy generation maps in an impinging jet whilst San et al. [15] studied entropy generation in convective heat and mass transfer within a smooth channel under some specific thermal boundary conditions. Baytas [2, 3] studied the optimisation in an inclined enclosure for minimum entropy generation in natural convection and Baytas and Pop [4] investigated the thermodynamic analysis of flow and heat transfer inside a trapezoidal cavity filled with a porous medium. Nag and Mukherjee [13]] studied thermodynamic optimisation of connective heat transfer through a duct with constant wall temperature

Keywords

Heat Transfer Porous Medium Entropy Generation Porous Channel Entropy Generation Rate 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. [1]
    Al-Hadhrami, A. K., Elliott, L. and Ingham, D. B. (2002). Combined free and forced convection in vertical channels of porous media. Transport in Porous Media, 49, 265–89.MathSciNetCrossRefGoogle Scholar
  2. [2]
    Baytas, A. C. (1997). Optimisation in an inclined enclosure for minimum entropy generation in natural convection. J. Non-Equilib. Thermodyn., 22, 145–55.MATHGoogle Scholar
  3. [3]
    Baytas, A. C. (2000). Entropy generation for natural convection in an inclined porous cavity. Int. J. Heat Mass Transfer, 43, 2089–99.MATHCrossRefGoogle Scholar
  4. [4]
    Baytas, A. C. and Pop, I. (1999). Free convection in oblique enclosures filled with a porous medium. Int. J. Heat Mass Transfer, 42, 1047–57.MATHCrossRefGoogle Scholar
  5. [5]
    Bejan, A. (1994). Entropy generation through heat and fluid flow (2nd edn). Wiley, New York.Google Scholar
  6. [6]
    Bejan, A. (1995). Convection heat transfer. Wiley, New York.Google Scholar
  7. [7]
    Bejan, A. (1996). Entropy generation minimisation. CRC Press, Boca Raton, FL.Google Scholar
  8. [8]
    Drost, M. K. and White, M. D. (1991). Numerical predictions of local entropy generation in an impinging jet. J. Heat Transfer, 113, 823–9.CrossRefGoogle Scholar
  9. [9]
    Kaviany, M. (1985). Laminar flow through a porous channel boundary by isothermal parallel plates. Int. J. Heat Mass Transfer, 28, 851–8.CrossRefGoogle Scholar
  10. [10]
    Kim, S. J. and Kim, D. (1999). Forced convection in microstructures for electronic equipment cooling. J. Heat Transfer, 121, 639–45.CrossRefGoogle Scholar
  11. [11]
    Mahmud, S. and Fraser, R. A. (2002). Thermodynamic analysis of flow and heat transfer inside channel with two parallel plates. Exergy, Int. J., 2, 140–6.CrossRefGoogle Scholar
  12. [12]
    Marafie, A. and Vafai, K. (2001). Analysis of non-Darcian effects on temperature differentials in porous media. Int. J. Heat Mass Transfer, 44, 4401–11.MATHCrossRefGoogle Scholar
  13. [13]
    Nag, P. K. and Mukherjee, P. (1987). Thermodynamic optimization of convective heat transfer through a duct with constant wall temperature. Int. J. Heat Mass Transfer, 30, 401–5.CrossRefGoogle Scholar
  14. [14]
    Nield, D. A. and Bejan, A. (1999). Convection in porous media (2nd edn). Springer, New York.Google Scholar
  15. [15]
    San, J. Y., Worek, W. M. and Lavan, Z. (1987). Entropy generation in convective heat transfer and isothermal convective mass transfer. J. Heat Transfer, 109, 647–52.CrossRefGoogle Scholar
  16. [16]
    Vafai, K. and Kim, S. J. (1989). Forced convection in a channel filled with a porous medium: an exact solution. J. Heat Transfer, 111, 1103–6.CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2004

Authors and Affiliations

  • A. C. Baytas
    • 1
  1. 1.The Faculty of Aeronautics and AstronauticsIstanbul Technical UniversityMaslak-IstanbulTurkey

Personalised recommendations