Novel High Frequency, Temperature Stable, Quartz Gyroscopes

Conference paper
Part of the IUTAM Bookseries book series (IUTAMBOOK, volume 26)

Abstract

An AT-cut quartz plate with lateral tines was proposed as an angular velocity sensor. The plate itself formed the driving component while the lateral tines formed the angular velocity sensors. The angular velocity effect on the plategyroscope was demonstrated via its effect on the electric potential at edge electrodes, and on the admittance at driving electrode. The change in electric potential at edge electrodes varied with the magnitude and sign of the angular velocity. An AT-cut plate-gyroscope may offer advantages in terms of (a) frequency stability (b) frequency-temperature stability, and (c) separation of the driving component from the sensing component. The separation of the driving component from the sensing component allowed for a wider variety of tine geometries and modes for detecting angular velocity. Since the Coriolis force was a function of the displacement velocities, the gyroscopic effect therefore a nonlinear problem, albeit weakly nonlinear. Furthermore the frequency responses of change in electric potential at the edge electrode, and change in admittance at the driving electrode were shown to be affected by the nonlinear elastic constants.

Keywords

Angular Velocity Electric Potential Coriolis Force Displacement Velocity Gyroscopic Effect 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. .
    Henry, R., and Kenny, D.: Comparative Analysis of MEMS, Programmable, and Synthesized Frequency Control Devices Versus Traditional Quartz Based Devices. Proceedings of the 2008 IEEE International Frequency Control Symposium, 396-401 (2008).Google Scholar
  2. .
    Yang, J. S.: Some Analytical Results on Piezoelectric Gyroscopes. Proceedings of the 1998 IEEE International Frequency Control Symposium, 733-741 (1998).Google Scholar
  3. .
    Nakamura, K., and Ohsaki, M.: Trapped-energy Vibratory Gyroscopes Using Rotated Y-Cut LiNbO3. Proceedings of the 1999 Joint Meeting EFTF – IEEE IFCS, 797-799 (1999).Google Scholar
  4. .
    Abe, H., Yoshida, T., Ishikawa, T., Miyazaki, N., and Watanabe, H.: Trapped – Energy Vibratory Gyroscopes Using a Partially Polarized Piezoelectric Ceramic Plate. Electronics and Communications in Japan, Part 2, Vol. 84 No. 3, 44-52 (2001).CrossRefGoogle Scholar
  5. .
    Nakamura, K., and Abe, T.: Vibratory Gyroscopes Using Trapped-Energy Vibrators of Rotated Y-cut LiTaO3. Proceedings of the 2001 IEEE Ultrasonics Symposium, 611-614 (2001).Google Scholar
  6. .
    Lee, P.C.Y., Liu, N.H. and Ballato, A.: Thickness Vibrations of Piezoelectric Plates with Dissipation. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 51 52-62 (2004).CrossRefGoogle Scholar
  7. .
    Lamb, J., and Richter, J.: Anisotropic Acoustic Attenuation with New Measurement for Quartz at Room Temperatures. Proceedings of the Royal Society 293A 479-492 (1966).Google Scholar
  8. .
    Yong, Y.-K.,: Three-Dimensional Finite Element Solution of the Lagrangean Equations for the Frequency Temperature Behavior of Y-Cut and NT-Cut Bars. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. UFFC-34 No.5, 491-499 (1987).CrossRefGoogle Scholar
  9. .
    Bechmann, R., Ballato, A.D., and Lukaszek, T.J.: Higher Order Temperature Coefficients of the Elastic Stiffnesses and Compliances of Alpha-Quartz. Proceedings of the IRE, Vol. 50 No. 8, 1812-1822 (1962).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media B.V. 2010

Authors and Affiliations

  1. 1.Department of Civil and Environmental EngineeringRutgers UniversityPiscatawayUSA
  2. 2.Department of Engineering MechanicsNingbo UniversityNingboChina

Personalised recommendations