Advertisement

On the Resilience of Sociotechnical Systems

  • Eloise TaysomEmail author
  • Nathan Crilly
Chapter
Part of the Translational Systems Sciences book series (TSS, volume 8)

Abstract

When designing or redesigning sociotechnical systems, it is often required that those systems be more “resilient’’ as a result. However, exactly what is meant by resilience in these contexts is unclear. To design resilient systems, we must first be able to answer a number of questions, including: Should a resilient system change to accommodate influences or stay the same? If the system changes, where should this change take place? How do we decide which system, or sub-system, to make resilient? For any given system, answering these questions requires engagement with different stakeholders, allowing a conversation to take place that typically spans different disciplines. However, resilience is a difficult concept to communicate about because terminology is not used consistently across, or even within, domains. This presents a challenge for designers wishing to elicit or understand stakeholders’ requirements for the systems that they are concerned with. To address this, we conducted a workshop with stakeholders working in different areas of academia, industry, and policy who are concerned with the resilience of sociotechnical systems. The aim of this workshop was to identify what stakeholders might want to convey about resilience and what would help them to communicate effectively. We identified three main characteristics of resilience and three system features that are critical to communication about resilience. These are all illustrated with a diagrammatic framework that was developed from real system examples given by the participants. From the data we propose a set of distinctions that offer a starting point for discussions about resilience with diverse stakeholders.

Notes

Acknowledgements

The authors wish to thank all of the workshop participants for their time and insights. Thanks also go to Belen Tejada Romero for her help in organizing the event and transcribing the data and to Dr. Chih-Chen for her constructive comments. This work was supported by the UK’s Engineering and Physical Sciences Research Council (EPSRC) through a Doctoral Training Grant awarded to Eloise Taysom and an Early Career Fellowship awarded to Nathan Crilly (EP/K008196/1). The raw data from the workshop cannot be made freely available because inherent to that data is sensitive information relating to the individuals and organizations involved.

References

  1. Adger, W. N. (2000). Social and ecological resilience: Are they related? Progress in Human Geography, 24(3), 347–364.  https://doi.org/10.1191/030913200701540465 CrossRefGoogle Scholar
  2. Allen, C. R., Angeler, D. G., Garmestani, A. S., Gunderson, L. H., & Holling, C. S. (2014). Panarchy: Theory and application. Ecosystems, 1–12.  https://doi.org/10.1007/s10021-013-9744-2 CrossRefGoogle Scholar
  3. Amalberti, R. (2006). Optimum system safety and optimum system resilience: Agonistic or antagonistic concepts? In Resilience engineering: Concepts and precepts (pp. 253–271). Hampshire, UK: Ashgate Publishing, Ltd.Google Scholar
  4. Ash, J., & Newth, D. (2007). Optimizing complex networks for resilience against cascading failure. Physica A: Statistical Mechanics and Its Applications, 380, 673–683.  https://doi.org/10.1016/j.physa.2006.12.058 CrossRefGoogle Scholar
  5. Baek, J. S., Meroni, A., & Manzini, E. (2015). A sociotechnical approach to design for community resilience: A framework for analysis and design goal forming. Design Studies, 40, 60–84.  https://doi.org/10.1016/j.destud.2015.06.004 CrossRefGoogle Scholar
  6. Behymer, K. J., & Flach, J. M. (2016). From autonomous systems to sociotechnical systems: Designing effective collaborations. She Ji: The Journal of Design, Economics, and Innovation, 2(2), 105–114.  https://doi.org/10.1016/j.sheji.2016.09.001 CrossRefGoogle Scholar
  7. Biggs, R., Schlüter, M., Biggs, D., Bohensky, E. L., BurnSilver, S., Cundill, G., et al. (2012). Toward principles for enhancing the resilience of ecosystem services. Annual Review of Environment and Resources, 37(1), 421–448.  https://doi.org/10.1146/annurev-environ-051211-123836 CrossRefGoogle Scholar
  8. Bruneau, M., Chang, S. E., Eguchi, R. T., Lee, G. C., O’Rourke, T. D., Reinhorn, A. M., et al. (2003). A framework to quantitatively assess and enhance the seismic resilience of communities. Earthquake Spectra, 19(4), 733–752.  https://doi.org/10.1193/1.1623497 CrossRefGoogle Scholar
  9. Buede, D. M. (2000). The engineering design of systems: Models and methods. New York: Wiley.Google Scholar
  10. Campanella, T. J. (2006). Urban resilience and the recovery of New Orleans. Journal of the American Planning Association, 72(2), 141–146.  https://doi.org/10.1080/01944360608976734 CrossRefGoogle Scholar
  11. Cardona, O. D., Hurtado, J. E., Duque, G., Moreno, A., Chardon, A. C., Velásquez, L. S., et al. (2003). The notion of disaster risk: Conceptual framework for integrated management. Indicators for Disaster Risk Management. Manizales, Colombia: National University of Colombia.Google Scholar
  12. Carpenter, S., Walker, B., Anderies, J. M., & Abel, N. (2001). From metaphor to measurement: Resilience of what to what? Ecosystems, 4(8), 765–781.  https://doi.org/10.1007/s10021-001-0045-9 CrossRefGoogle Scholar
  13. Carpenter, S. R., Arrow, K. J., Barrett, S., Biggs, R., Brock, W. A., Crépin, A.-S., et al. (2012). General resilience to cope with extreme events. Sustainability, 4(12), 3248–3259.  https://doi.org/10.3390/su4123248 CrossRefGoogle Scholar
  14. Chalupnik, M. J., Wynn, D. C., & Clarkson, P. J. (2013). Comparison of ilities for protection against uncertainty in system design. Journal of Engineering Design, 24(12), 814–829.  https://doi.org/10.1080/09544828.2013.851783 CrossRefGoogle Scholar
  15. Chatham House. (2017). Chatham House Rule.Google Scholar
  16. Chen, C.-C., & Crilly, N. (2014). Modularity, redundancy and degeneracy: Cross-domain perspectives on key design principles (pp. 546–553). In 2014 8th annual IEEE Systems Conference (SysCon). Ottawa, Ontario, Canada.  https://doi.org/10.1109/SysCon.2014.6819309
  17. Chen, C.-C., & Crilly, N. (2016a). Describing complex design practices with a cross-domain framework: Learning from synthetic biology and swarm robotics. Research in Engineering Design, 27(3), 291–305.  https://doi.org/10.1007/s00163-016-0219-2 CrossRefGoogle Scholar
  18. Chen, C.-C., & Crilly, N. (2016b). From modularity to emergence: a primer on the design and science of complex systems.  https://doi.org/10.17863/CAM.4503
  19. Comfort, L. K. (1994). Risk and resilience: Inter-organizational learning following the Northridge Earthquake of 17 January 1994. Journal of Contingencies and Crisis Management, 2(3), 157–170.  https://doi.org/10.1111/j.1468-5973.1994.tb00038.x CrossRefGoogle Scholar
  20. Comfort, L. K. (1999). Shared risk: Complex systems in seismic response. New York: Pergamon.Google Scholar
  21. Crilly, N. (2013). Function propagation through nested systems. Design Studies, 34(2), 216–242.  https://doi.org/10.1016/j.destud.2012.10.003 CrossRefGoogle Scholar
  22. de Weck, O., Eckert, C., & Clarkson, J. (2007). A classification of uncertainty for early product and system design. Presented at the International Conference on Engineering Design. Paris: ICED.Google Scholar
  23. de Weck, O., Roos, D., & Magee, C. (2011). Engineering systems: Meeting human needs in a complex technological world. Cambridge, MA: MIT Press.CrossRefGoogle Scholar
  24. de Weck, O., Ross, A. M., & Rhodes, D. H. (2012). Investigating relationships and semantic sets amongst system lifecycle properties (ilities). Presented at the Third International Engineering Systems Symposium. Delft, The Netherlands: CESUN 2012.Google Scholar
  25. Dovers, S. R., & Handmer, J. W. (1992). Uncertainty, sustainability and change. Global Environmental Change, 2(4), 262–276.  https://doi.org/10.1016/0959-3780(92)90044-8 CrossRefGoogle Scholar
  26. Fiksel, J. (2003). Designing resilient, sustainable systems. Environmental Science & Technology, 37(23), 5330–5339.  https://doi.org/10.1021/es0344819 CrossRefGoogle Scholar
  27. Fiksel, J. (2006). Sustainability and resilience: Toward a systems approach. Sustainability: Science, Practice, & Policy, 2(2).Google Scholar
  28. Fitzgerald, M. E., & Ross, A. M. (2012). Sustaining lifecycle value: Valuable changeability analysis with era simulation (pp. 1–7). Presented at the Systems Conference (SysCon), 2012 IEEE International.  https://doi.org/10.1109/SysCon.2012.6189465
  29. Folke, C., Carpenter, S. R., Walker, B., Scheffer, M., Chapin, T., & Rockström, J. (2010). Resilience thinking: Integrating resilience, adaptability and transformability. Ecology and Society, 15(4), 20.CrossRefGoogle Scholar
  30. Frei, R., & Serugendo, G. D. M. (2011a). Advances in complexity engineering. International Journal of Bio-Inspired Computation, 3(4), 199–212.CrossRefGoogle Scholar
  31. Frei, R., & Serugendo, G. D. M. (2011b). Concepts in complexity engineering. International Journal of Bio-Inspired Computation, 3(2), 123–139.CrossRefGoogle Scholar
  32. Fricke, E., & Schulz, A. P. (2005). Design for changeability (DfC): Principles to enable changes in systems throughout their entire lifecycle. Systems Engineering, 8(4), 342–359.  https://doi.org/10.1002/sys.20039 CrossRefGoogle Scholar
  33. Haberfellner, R., & de Weck, O. (2005). Agile systems engineering versus agile systems engineering (Vol. 2, pp. 1449–1465).Google Scholar
  34. Haimes, Y. Y. (2009). On the definition of resilience in systems. Risk Analysis, 29(4), 498–501.  https://doi.org/10.1111/j.1539-6924.2009.01216.x CrossRefGoogle Scholar
  35. Haimes, Y. Y., Crowther, K., & Horowitz, B. M. (2008). Homeland security preparedness: Balancing protection with resilience in emergent systems. Systems Engineering, 11(4), 287–308.  https://doi.org/10.1002/sys.20101 CrossRefGoogle Scholar
  36. Handmer, J. W., & Dovers, S. R. (1996). A typology of resilience: Rethinking institutions for sustainable development. Organization & Environment, 9(4), 482–511.  https://doi.org/10.1177/108602669600900403 CrossRefGoogle Scholar
  37. Holling, C. S. (1973). Resilience and stability of ecological systems. Annual Review of Ecology and Systematics, 4, 1–23.  https://doi.org/10.2307/2096802 CrossRefGoogle Scholar
  38. Home, J. F., & Orr, J. E. (1997). Assessing behaviors that create resilient organizations. Employment Relations Today, 24(4), 29–39.  https://doi.org/10.1002/ert.3910240405 CrossRefGoogle Scholar
  39. Jen, E. (2003). Stable or robust? What’s the difference? Complexity, 8(3), 12–18.CrossRefGoogle Scholar
  40. Johnson, J., Panagioti, M., Bass, J., Ramsey, L., & Harrison, R. (2016). Resilience to emotional distress in response to failure, error or mistakes: A systematic review. Clinical Psychology Review, 52, 19–42.  https://doi.org/10.1016/j.cpr.2016.11.007 CrossRefGoogle Scholar
  41. Joseph, J. (2013). Resilience as embedded neoliberalism: A governmentality approach. Resilience, 1(1), 38–52.  https://doi.org/10.1080/21693293.2013.765741 CrossRefGoogle Scholar
  42. Kimhi, S., & Shamai, M. (2004). Community resilience and the impact of stress: Adult response to Israel’s withdrawal from Lebanon. Journal of Community Psychology, 32(4), 439–451.  https://doi.org/10.1002/jcop.20012 CrossRefGoogle Scholar
  43. Kroes, P., Franssen, M., van de Poel, I., & Ottens, M. (2006). Treating sociotechnical systems as engineering systems: Some conceptual problems. Systems Research and Behavioral Science, 23(6), 803–814.  https://doi.org/10.1002/sres.703 CrossRefGoogle Scholar
  44. Leveson, N., Dulac, N., Zipkin, D., Cutcher-Gershenfeld, J., Carroll, J., & Barrett, B. (2006). Engineering resilience into safety-critical systems. In Resilience engineering: Concepts and precepts (pp. 95–124). Hampshire, UK: Ashgate Publishing, Ltd.Google Scholar
  45. Levis, A. (1999). System architectures. In A. P. Sage & W. B. Rouse (Eds.), Handbook of systems engineering and management (pp. 427–454). New York: Wiley.Google Scholar
  46. MacAskill, K., & Guthrie, P. (2014). Multiple interpretations of resilience in disaster risk management. Procedia Economics and Finance, 18, 667–674.  https://doi.org/10.1016/S2212-5671(14)00989-7 CrossRefGoogle Scholar
  47. Madni, A. M., & Jackson, S. (2009). Towards a conceptual framework for resilience engineering. IEEE Systems Journal, 3(2), 181–191.  https://doi.org/10.1109/JSYST.2009.2017397 CrossRefGoogle Scholar
  48. Maguire, B., & Hagan, P. (2007). Disasters and communities: Understanding social resilience. Australian Journal of Emergency Management, 22(2), 16–20.Google Scholar
  49. Maier, M. W., & Rechtin, E. (2009). The art of systems architecting (3rd ed.). Boca Raton, FL: CRC Press.Google Scholar
  50. McDonald, N. (2006). Organisational resilience and industrial risk. In Resilience engineering: Concepts and precepts (pp. 155–182). Hampshire, UK: Ashgate Publishing, Ltd.Google Scholar
  51. McManus, H., Richards, M., Ross, A. M., & Hastings, D. (2007). A framework for incorporating ‘ilities’ in tradespace studies (Vol. 1, pp. 941–954). Presented at the American Institute of Aeronautics and Astronautics Space 2007 Conference. Long Beach, CA: AIAA.Google Scholar
  52. Melese, Y., Stikkelman, R., & Herder, P. (2016). A sociotechnical perspective to flexible design of energy infrastructure systems (pp. 004669–004674). In 2016 IEEE International Conference on Systems, Man, and Cybernetics (SMC).  https://doi.org/10.1109/SMC.2016.7844968
  53. Midgley, G. (1992). The sacred and profane in critical systems thinking. Systems Practice, 5(1), 5–16.  https://doi.org/10.1007/BF01060044 CrossRefGoogle Scholar
  54. Mosleh, M., Ludlow, P., & Heydari, B. (2016). Resource allocation through network architecture in systems of systems: A complex networks framework (pp. 1–5). In 2016 Annual IEEE Systems Conference (SysCon).  https://doi.org/10.1109/SYSCON.2016.7490629
  55. Nachtwey, A., Riedel, R., & Mueller, E. (2009). Flexibility oriented design of production systems (pp. 720–724). Presented at the International Conference on Computers Industrial Engineering, 2009. CIE 2009.  https://doi.org/10.1109/ICCIE.2009.5223914
  56. Norman, D. A., & Stappers, P. J. (2015). DesignX: Complex sociotechnical systems. She Ji: The Journal of Design, Economics, and Innovation, 1(2), 83–106.  https://doi.org/10.1016/j.sheji.2016.01.002 CrossRefGoogle Scholar
  57. Pariès, J. (2006). Complexity, emergence, resilience. In Resilience engineering: Concepts and precepts (pp. 43–54). Hampshire, UK: Ashgate Publishing, LtdCrossRefGoogle Scholar
  58. Pavard, B., Dugdale, J., Saoud, N. B., Darcy, S., & Salembier, P. (2006). Design of robust sociotechnical systems. Presented at the Resilience Engineering, Juan les Pins, Ecole de Mines de Paris, France.Google Scholar
  59. Pimm, S. L. (1984). The complexity and stability of ecosystems. Nature, 307(5949), 321–326.CrossRefGoogle Scholar
  60. Robson, C. (2011). Real world research (3rd ed.). Chichester, UK: Wiley.Google Scholar
  61. Rose, A. (2007). Economic resilience to natural and man-made disasters: Multidisciplinary origins and contextual dimensions. Environmental Hazards, 7(4), 383–398.  https://doi.org/10.1016/j.envhaz.2007.10.001 CrossRefGoogle Scholar
  62. Rose, A., & Liao, S.-Y. (2005). Modeling regional economic resilience to disasters: A computable general equilibrium analysis of water service disruptions. Journal of Regional Science, 45(1), 75–112.  https://doi.org/10.1111/j.0022-4146.2005.00365.x CrossRefGoogle Scholar
  63. Ross, A. M. (2008). Defining and using the new ‘ilities’ (SEAri Working Paper Series No. WP-2008-4-1). Cambridge, MA: Massachusetts Institute of Technology, MIT.Google Scholar
  64. Ryan, E. T., Jacques, D. R., & Colombi, J. M. (2012). An ontological framework for clarifying flexibility-related terminology via literature survey. Systems Engineering, 16(1), 99–110.CrossRefGoogle Scholar
  65. Sheffi, Y., & Rice, J. B. (2005, Fall). A supply chain view of the resilient enterprise. MIT Sloan Review, 47, 41–48.Google Scholar
  66. Simmie, J., & Martin, R. (2010). The economic resilience of regions: Towards an evolutionary approach. Cambridge Journal of Regions, Economy and Society, 3(1), 27–43.  https://doi.org/10.1093/cjres/rsp029 CrossRefGoogle Scholar
  67. Smith, L., & Violanti, J. (2000). Disaster response: Risk, vulnerability and resilience. Disaster Prevention and Management: An International Journal, 9(3), 173–180.  https://doi.org/10.1108/09653560010335068 CrossRefGoogle Scholar
  68. Timmerman, P. (1981). Vulnerability resilience and collapse of society: A review of models and possible climatic applications (Environmental Monograph No. 1). Toronto, Canada: Institute for Environmental Studies, University of Toronto.Google Scholar
  69. Umoquit, M. J., Tso, P., Varga-Atkins, T., O’Brien, M., & Wheeldon, J. (2013). Diagrammatic elicitation: Defining the use of diagrams in data collection. The Qualitative Report, 18(60), 1–12.Google Scholar
  70. UN/ISDR. (2004). Living with risk: A global review of disaster reduction initiatives. New York: United Nations Publications.Google Scholar
  71. Vermaas, P., Kroes, P., van de Poel, I., Franssen, M., & Houkes, W. (2011). A philosophy of technology: From technical artefacts to sociotechnical systems. San Francisco: Morgan & Claypool Publishers.CrossRefGoogle Scholar
  72. Westrum, R. (2006). A typology of resilience situations. In Resilience engineering: Concepts and precepts (pp. 55–68). Hampshire, UK: Ashgate Publishing, Ltd.Google Scholar
  73. Whitacre, J., & Bender, A. (2010). Degeneracy: A design principle for achieving robustness and evolvability. Journal of Theoretical Biology, 263(1), 143–153.  https://doi.org/10.1016/j.jtbi.2009.11.008 CrossRefGoogle Scholar
  74. Wiendahl, H.-P., ElMaraghy, H. A., Nyhuis, P., Zäh, M. F., Wiendahl, H.-H., Duffie, N., et al. (2007). Changeable manufacturing – Classification, design and operation. CIRP Annals – Manufacturing Technology, 56(2), 783–809.  https://doi.org/10.1016/j.cirp.2007.10.003 CrossRefGoogle Scholar
  75. Wildavsky, A. B. (1988). Searching for safety. New Brunswick, NJ: Transaction Publishers.Google Scholar
  76. Woods, D. D., & Cook, R. I. (2006). Incidents – Markers of resilience or brittleness? In Resilience engineering: Concepts and precepts (pp. 69–76). Hampshire, UK: Ashgate Publishing, Ltd.Google Scholar

Copyright information

© Springer Japan KK, part of Springer Nature 2018

Authors and Affiliations

  1. 1.University of CambridgeCambridgeUK

Personalised recommendations